sceptre vape how to use

You can vape with the Innokin Sceptre by holding the fire button or by simply puffing on the device. In addition to the basic vaping function, you can also adjust the wattage of the Innokin Sceptre to suit your preferences for vapour warmth and flavour intensity.

Full Answer

How do I use the sceptre?

The vaporizer won’t turn on. Connect the microUSB port to a quality power supply and ensure the device is charged. The Sceptre can be turned on by pressing the main firing button 3 times rapidly. The vaporizer is not producing flavour or clouds. Check that the Sceptre pod is securely placed into the pod bay of your battery.

What is the battery capacity of the vape sceptre?

Sep 11, 2020 · The Sceptre is a beginner friendly device, and it’s very easy to operate. The pods are a two-piece design, and you’ll need to remove the bottom in order to insert the coil. Just hold the bottom part and rotate counterclockwise to take it off. Screw your coil inside the connector and prime it first before using with a few drops of juice.

What does the innokin sceptre vape look like?

This Sceptre pod system review was sponsored by Innokin. The liquid used in the video does not contain nicotine. This is my Influencer Store (it’s not actual...

How do I use the vape?

1. Use a hair dryer and blow on the sticker; this will warm up the sticker’s glue which will allow you to easily remove the sticker. 2. Use regular tape to remove the glue residue by taping the glue residue then pulling the tape up. Repeat this action until the glue residue is completely removed.Method B 1.

How do you use the innokin Sceptre?

How do you turn on a Sceptre vape?

Why is my innokin Sceptre flashing green?

Why does my innokin Sceptre taste burnt?

What does RDL mean vape?

How do you refill a vape pod?

Why is my vape flashing and not working?

How do you fix a blinking vape?

Why is my vape flashing blue?

Why does my vape crackle?

How can I make my vape coil last longer?

What wattage should I vape at?

How many mAh is a sceptre?

The Sceptre is equipped with a large 1400mAh internal battery for all day vaping, charging at 1Amp via micro-USB. The Sceptre’s Battery Capacity LED clearly shows current battery charge and when it’s time to recharge.

How to see if a sceptre pod is connected?

Insert the sceptre pod into the device and a white LED light under the pod will shine through to show that the pod is securely connected, if you don’t see the light when inserting the pod, first make sure the textured grip bumps are on the open side of the device and the fill port on the closed side, or, if it is the correct way around make sure the base of the pod is fully secured on to the pod. This LED light can also help you see your juice levels in your pod easily.

What does MTL mean in vaping?

For those who aren’t sure what these terminologies mean, Mouth-to-lung (MTL) is essentially the same as how most people drag on a cigarette. You suck the vape into your mouth and then inhale into your throat or lungs. People that MTL aren’t focused on generating huge clouds of vapour.

How to activate boost mode on a sceptre?

Activate Boost Mode! – to activate the boost mode on either coil simple power off the Sceptre with 3 clicks, release and then hold the button, the LED cycles between normal (green) and Boost mode (purple). Boost mode creates more heat and vapour.

Where is the fill hole on a sceptre pod?

Sceptre pods are easy to fill, located on the side of the pod is a rubber tab, pull out the lift side of the tab to uncover a fill hole, not too big as to allow for leaking when filling but not too small that the nibs of your e-liquid bottles don’t fit.

Can you vape mouth to lung?

It doesn’t matter if you vape Mouth to Lung or Direct to Lung, neither is ‘better’ than the other. There is a suggestion from some, that people should start with an MTL vape and then move on to, or ‘upgrade’, to a DTL vape. While I would always suggest starting with a MTL device (for no other reason than it’s closer to how most people smoke) there is no good reason to switch to DTL later unless you really want to, and if you like a bit of both in your day, with the Sceptre you can do both with the one device!

Does the Sceptre have flavor?

Let’s begin with flavor, the Sceptre is built with the ultimate vaping experience at heart, and for vapers, it has to be flavour! The key to great flavor is great coils. With the sceptre not only does the flavor come through quickly, it also comes through intensely! Enjoy your favourite e-liquid how it was intended to taste! The Sceptre also auto detects the coil in your pod and adjusts the wattage according to the coil to save your coil from burning out.

How to turn on a sceptre?

Connect the microUSB port to a quality power supply and ensure the device is charged. The Sceptre can be turned on by pressing the main firing button 3 times rapidly.

How to check sceptre pod?

Check that the Sceptre pod is securely placed into the pod bay of your battery. Make sure the device is turned on via pressing the firing button rapidly 3 times in a row. Inspect the contact base of your Sceptre pod and ensure that it is clean and making solid connection with the contacts within your battery.

What happens if your vaporizer is too hot?

If the atomizer is becoming too hot, allow the device a couple of minutes to cool down before resuming use . If the tank is very hot, the vaporizer can potentially malfunction. Please disconnect the pod immediately in this event and store the vaporizer safely until it has cooled down.

What coils are compatible with the sceptre?

The Sceptre is compatible with the 0.5ohm RDL S coil, the 0.65ohm MTL S coils, and the 1.2ohm MTL S coil.

Can a vaporizer be damaged?

The device may be malfunctioning or damaged. Please disconnect the atomizer immediately and store the vaporizer in a nonflammable environment, such as a fire retardant bag or container, and then continue to contact our Regional Support for more assistance.

Where to find the product authenticity number on Innokin?

Locate the Product Authentication number on the product packaging. Please visit https://www.innokin.com/verify-device and follow the instructions to verify your product authenticity.

Can you vape while charging?

Vape While Charging is a feature commonly seen in our vaporizers that allows you to vape while you are charging your device. Be advised that while this feature can be convenient, it’s not recommended to vape while charging a device that is extremely low on battery life. Do not use Vape While Charging if the LED indicator is still flashing as using this feature while the battery is low will damage the overall lifespan of the battery.

What is in the Innoin Sceptre kit?

The contents that are inside the kit include the Innoin Sceptre device itself, a pos, two coils with one of them installed already, a micro USB cable, and a user manual to guide you through.

What is the best store to buy vapes?

One of the best stores you would come across out there for your vape products is UPENDS.com and they have quality products in wholesales. You get to have access to quality products, all at reasonable prices. One of the available products at UPENDS is UpOX.

How many ml of e juice can a tpd take?

It has the capacity to take e-juice of 3ml standard level and 2ml TPD level

What is a sceptre coil?

Sceptre RDL (0.5Ω) Mesh coils and expanded Airflow deliver an extremely flavourful direct to lung vaping experience, while also conserving battery-life and eliquid.

How many mAh battery does a sceptre have?

The Sceptre’s Battery Capacity LED clearly shows battery charge and when it’s time to recharge the 1400mAh battery via microUSB.

How to replace Innokin sceptre coils?

The pods of Innokin Sceptre are easy to fill and the coils are easy to replace. Simply twist the bottom to open the pod and replace the coils. Reuse the pod and replace the coil to save money and reduce plastic waste.

Where is the key to vaping?

The Key to Great Vaping Is In the Coils!

What does Boost mode do on a sceptre?

Power off the Sceptre and hold the button, the LED cycles between Normal (green) and Boost mode (purple). Boost mode create s more heat and vapor.

What is a sceptre vape?

The Sceptre is a vape that excels both from a build quality and a design perspective. It feels premium, and it is in many ways what I’d call a typical high-quality Innokin product. With one caveat. Unlike the majority of Innokin products, the Sceptre leaves a lot to be desired as far as MTL goes.

How many coils are there in the Sceptre?

There are two coils currently available for the Sceptre, and the package contains one of each:

What is an Innokin Sceptre?

The Innokin Sceptre is a pod-based AIO that’s made for both MTL and RDL vaping. While not a part of the Platform series, the Sceptre is loyal to Innokin’s goal of catering to beginner vapers. It is an easy to use vape kit that takes 3 mL pods, comes with two types of coils, and houses a 1400 mAh battery. On top of that, it allows for airflow adjustment, and can fire in two power levels for each of the included coils.

Where is the battery indicator LED on a vape?

The battery indication LED is placed above the power button and next to the power setting lights. It will light up every time you vape and has three levels:

Do pod vapes do MTL?

While many pod vapes claim to do MTL and RDL equally well, not many have succeeded till now. Keep reading to find out if the Sceptre will fit your style of vaping, and if it is a device you should invest in.

What jack do I need for my HDCP?

Make sure you have a 3.5 mm mini-jack cable connected from your HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain a RCA audio converted into 3.5 mm mini-jack cable.

How to fix HDCP video?

1. Reboot your HDCP video device but turning them off and unplugging the power cord. Wait up to 8 minutes to plug the power back in to see if it works or not.

How to vape with a fire pod?

To vape you can either just inhale to trigger the automatic airflow sensor or press the fire button. The LED indicators display the battery level remaining and the power level selected. A light is also provided to view the liquid level in the pod when you press fire or install the pod.

Can you see liquid level in a pod?

The pod itself is very clear and you can easily see the liquid level.