Pin One C-10 is a ultra compact multi-functional vape box for CE3 Thick Oil. You can adjust the voltage between 3.0V (Red), 3.7V (Blue), and 4.2V (Green) by clicking the button 3 times. Features:
Full Answer
What voltage should I Set my vape pen to?
For dabs (wax), set your pen between 4.0V-4.3V. Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V.
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
What is a type 1 vape system?
This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
How to turn on/off a vape pen?
This heat up the liquid in the cartridge and transforms it into vapor. The vapor passes through the device and into the mouth of the user who releases it by exhaling. How to turn on/off a vape pen? 1. Press the button rapidly 5 times 2. Notice the light on the button flashing 3.
How do you change the voltage on a vape pen?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly.
How do I change my vape pen settings?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
What does 3.3 V mean on a vape pen?
In general, most slim vape pens will be in the lower 3.3v range. This is the correct voltage for most oil cartridges but does not provide enough power for ceramic or wickless cartridges. These types of cartridges offer better vapor quality and produce more vapor, but require a voltage of 3.7 or higher.
What color is the highest setting on a vape pen?
The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
What should my vape be set at?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
What mode should I use on my vape?
What Mode Should I Use On My Vape?Wattage/Voltage (Power Mode) Appropriate Wire Materials: Kanthal, Stainless Steel (SS), NiChrome (NiCr) ... Nickel Mode (Ni Mode) Appropriate Wire Materials: Nickel (Ni) ... Titanium Mode (Ti Mode) Appropriate Wire Materials: Titanium (Ti) ... Stainless Steel Mode (SS Mode)
How does voltage affect vape?
How does voltage affect vaping? Voltage is one of the factors that effects the amount of vapour you get. The greater the voltage, the higher the temperature, meaning more vapour. Original, Logic CURV, Logic PRO and Logic Compact all have fixed power settings - 3.7 Ohm.
What do the numbers mean on my vape?
What do those numbers mean for you the vapor? General rule of thumb is the lower the ohm(lower the number) the harder the hit, more vapor, warmer the vape, and shorter the battery life before recharging.
What are volts on a vape?
Do keep in mind that most vape pens go from 2.0 to 4.8 volts. So, if you are more of a happy trigger finger, I recommend starting low and building your way up.
What temp should my vape mod be at?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What does the blue light mean on a vape pen?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
What do the lights on a vape pen mean?
Your vape pen will have a light indicator on the LED to let you know what the battery needs. The low battery signals with a red light or flashing white light (depending on the model), meaning you need to charge it. Once the light on your screen turns green you know it is fully charged and ready to be used.
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
What happens if you set your coil incorrectly?
If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.
Is a 9/10 tank top fill?
If you have a traditional tank you need to determine whether your tank is a top fill or a bottom fill. 9/10 tanks are top fill but it will be marked in the product packaging/manual what your tank is.
What is a vape pen?
Vape pens are a great alternative to burning CBD or marijuana flower due to their convenience, cleanliness, portability and odorless vapor. If you just need a quick hit, vape pens allow you to get instant relief with a quick press of a button—all without having to grind and pack a piece.
How to run wax in preheat mode?
Preheat mode runs at a lower voltage than when actually pressing the button down , so only run it if your wax is super thick and clogged, or for a hands-free experience. Double-click the button to run it and take a hit!
Can a USB charger overcharge a pen?
Other USB chargers can easily overcharge your battery, weakening the cells inside over time. This is because other chargers continue to charge the battery, even when the charge is full. If you charge your pen overnight like most, you can easily degrade your battery in just a few months. The Smart Charger automatically stops supplying energy to the battery as soon as it’s fully charged.
Can you crank the temperature up on a slim twist pen?
Wax users—don’t be afraid to crank the temperature up a few notches. If you use oil or a thinner concentrate, your pen should be good to go right out of the box.
How to get vapor production from manual fire?
If you are not getting any vapor production while inhaling or using manual fire, first try switching to a higher power mode by pressing the function button on the device two (2) times in rapid succession. Then try resetting the pins on the magnetic adapters to ensure a good connection is made between your cartridge and the magnetic adapters.
Where are the holes in the top airflow cartridge?
Bottom airflow cartridges will have holes located on the bottom of the cartridge on or near the threading. Top airflow cartridges will not trigger auto inhale and will require the use of manual fire.
How to clean magnetic adapter?
To clean the adapters first remove your cartridge from the adapter and set the cartridge aside. Then, using another damp Q-Tip, clean the inner threads of the magnetic adapter by running the Q-Tip around the threads and bottom of the adapter.
How many magnetic adapters does a PCKT One have?
The PCKT One comes with three (3) magnetic adapters, a Short adapter for 1 gram (1 mL) cartridges, a Tall adapter for 0.5 gram (0.5 mL) cartridges and an Extendo adapter for cartridges larger than 10.5 mm in diameter.
How many watts does a PCKT One Plus have?
The PCKT One Plus has 3 variable voltage power modes to pick from. Low power has a maximum output of 3.7 Watts, Medium power has a maximum output of 4.3 Watts and High power a maximum output of 5.1 Watts. To understand and read these wattage levels you first need to know the ohms of the cartridge you are using. Example: the SPRK Cartridge has a 1.5 ohm coil. When using the PCKT One Plus in Low power with the SPRK Cartridge you take the 3.7 Watts
What size chamber does the PCKT One Plus have?
The PCKT One Plus has a 11.5 mm diameter chamber and will fit most cartridges on the market. If you have cartridges larger than 11.5 mm like in diameter, Rove 510 cartridges, you can purchase the Extendo adapter for the PCKT One Plus on our website to use with these types of cartridges. How to use your PCKT One Plus.
How to tell if a cartridge is top or bottom?
Do you know what type of cartridge you are using, is it a top or bottom airflow cartridge? If you are unsure of what type of cartridge you are using, you can see what type you have by taking a quick look at where the air inlets are located on your cartridge . Top airflow cartridges will have small pin sized holes on the side or on the top of the mouthpiece. Bottom airflow cartridges will have holes located on the bottom of the cartridge on or near the threading. Top airflow cartridges will not trigger auto inhale and will require the use of manual fire. You can manually fire the device by holding down the function button while inhaling.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
What is it called when you test your vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How many clicks to change heat setting?
Three clicks to change the heat setting.
How long does it take for eliquid to soak in a coil?
Please wait 5 minutes for the e-liquid to soak into the coil completely.
Do vape pens have the same parts?
Before asking questions, it’s necessary to know the components of a vape pen. In fact, most vape pens have the same parts, though some will differ slightly.