How to Vape the Pax 3
- Grind your Material. So now that you know the basic functions, it’s time to get to business. Start with your vape turned off.
- Pack Your Oven. Next, we need material to meet vape. ...
- Turn the Device on and Choose Your Temperature. Then, when the petals have turned that lovely shade of green, you’re ready to vape! ...
- Finish/Turn Off/Clean Up. Once you’ve had your ultimate vaping experience, simply turn the Pax 3 off by again holding down the mouthpiece button.
- How to Use the Pax 3 with Concentrates. If you’re keen to use the Pax 3 with concentrates, it’s super easy to do as well. ...
How do you use the Pax 3 vaporizer?
Included in the box are:
- PAX 3
- One magnetic charging cradle with USB cord that plugs into your computer
- Two interchangeable mouthpieces: one flat, already fitted with the device, and one raised
- Two interchangeable oven lids: one standard already fitted on the device, and one half pack oven lid, for a smaller oven load
What is temperature setting on Pax 3?
- Low: The device will warm to 520°F. This setting is represented by a single lit “petal” on the device’s LED indicator.
- Medium low: The device will warm to 610°F. This setting is represented by two lit petals on the device’s LED indicator.
- Medium high: The device will warm to 700°F. ...
- High: The device will warm to 790°F. ...
Does the Pax 3 have a party mode?
The Pax 3 (Review | Buy) is great for parties, game nights, watch parties, and any other occasions when you have a bunch of people hanging out together.It can fit up to 0.3g in the oven so it’s pretty large. However, it’s likely that you’ll be using it by yourself most of the time, in which case you likely won’t be using as much herb as you would in a group setting. and for those ...
How do I Clean my Pax 3 vaporizer?
- A glass of fresh water
- Cotton swabs
- Isopropyl alcohol and/or alcohol wipes
- A wire brush, included with PAX 3
- Pipe cleaners, included with PAX 3
- Paper towels, in case of any excess dirt
How do I use my PAX 3?
3:027:47How To Use PAX 3 - YouTubeYouTubeStart of suggested clipEnd of suggested clipGreen means go place your lips around the small opening on the mouthpiece. And draw we recommendMoreGreen means go place your lips around the small opening on the mouthpiece. And draw we recommend gentle draws to pull the vapors through the air path.
How do I use my PAX vaporizer?
1:254:14How to Use PAX 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipChange from green to yellow orange. Or red exit temperature set mode by holding down on theMoreChange from green to yellow orange. Or red exit temperature set mode by holding down on the mouthpiece button for an extended press or by shaking the device keeping your packs clean is easy remove.
What temperature should I set my PAX 3?
LED settings while using temp set mode Two yellow petals: This color means that PAX 3 is set to a medium temperature setting of 380° Fahrenheit. Three orange petals: PAX 3 is on a medium-high setting of 400° Fahrenheit when this combination of LED lights and colors is on display.
How tight should I pack my PAX 3?
A tight pack will help the heat spread throughout the bowl of your PAX 3. You can use the lid, or the PAX multi-tool, to firmly tamp down the oven's contents. Smaller loads still need to be tightly packed for best performance, so use the the half-pack oven lid if you're using less material.
Does the PAX get you higher?
Pax, the pocket vaporizer company that's sold more than 2 million units to date, is announcing a major update to help its customers get high. Called Session Control, it's an update to the company's app that lets you set how much you want to vape at once.
How long does PAX 3 take to heat up?
PAX 3 heats in as little as 15 seconds. PAX 3's use of lip and motion sensing automatically cool and boost oven temperatures offering significant performance over other conduction vaporizers that only hold the heater at one consistent temperature.
How many hits is a PAX 3?
The Pax 3 has a small oven lid that users can adjust to decrease the oven size to get more hits from a smaller amount of material. Without this lid in place, users can get anywhere from ten to twenty hits from a fully loaded chamber on the Pax 3.
Which PAX setting is best?
To get the absolute best flavors and the most vapor possible, start at the lowest temp setting and vape until the flavor is mostly gone, or on its way out. Bump up to the second Pax heat setting and continue vaping. Continue increasing the Pax temperature until the flavor is gone at the 4th setting.
How much wax do I put in my PAX?
Keep it lightly loaded. Finally, the concentrate insert in the PAX 3 isn't very large, and unlike herbal mixes, which should be firmly packed, air is your friend with stickier substances. A tiny amount of concentrate, about the size of a small pea, will ensure proper airflow and plenty of room to produce great vapor.
How do I get the most out of my PAX 3?
Pax 3 Tips and TricksGet a Good Grind. ... Use The Half-Pack Oven Lid If You're Flying Solo. ... Engage Stealth Mode For Some Low Key Vaping. ... Empty The Chamber After Each Session. ... Clean The Vapor Path After Every Few Sessions. ... Don't Use The Pax 3 For Wax. ... Use The Raised Mouthpiece.
How long does a bowl last in PAX 3?
It's a matter of trial and error, and experimentation will take your vaping to the next level. With Pax 3 (Review | Buy), it depends on the temperature settings. But generally I get around 5 minutes of delicious fresh flavor, then it slowly declines. I start with temperature three and increasing to 4 towards the end.
How do you get big clouds on PAX 3?
By starting at the lowest setting, you'll get all the flavor that you may miss out at with the higher temperatures. Then, as you increase the heat, you'll finish off with larger clouds, essentially hitting the entire heat spectrum during your session.
How to charge a PAX 3?
Make sure to fully charge your PAX 3 vaporizer before your first use. Plug the cradle into a USB power source, then set the PAX 3 on top of it with the lights up . If it’s facing the right direction, the magnets will cause it to slide into place over the charging contacts. The number of petals currently illuminated will show you ...
What happens when you touch a PAX 3?
When the petals turn blue, the vape is in standby mode. Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. After three minutes of inactivity, the PAX 3 will shut off on its own.
How long does it take for a PAX 3 to cool off?
If you set the PAX 3 down for around 30 seconds, the oven will start to cool off. This makes more efficient use of the battery, and keeps your herbs from cooking when you aren’t actively hitting it. When the petals turn blue, the vape is in standby mode. Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. After three minutes of inactivity, the PAX 3 will shut off on its own.
What is the best grinder for a PAX 3?
The PAX 3 works best with very finely ground herb. A two-piece grinder works best, but you can also turn over your favorite four-tier so that the herb stays between the teeth longer.
How to change temperature on a vape?
To change the temperature, hold down the mouthpiece button for a few seconds , until the petals on the front flash. The petals will then illuminate to show your current temperature setting. Press the mouthpiece button to cycle through temperatures, then hold the button or shake the vape to set it.
How long does it take for a PAX 3 to go into idle mode?
Turn the PAX 3 on with nothing in the oven, and turn it up to the highest temperature setting. Since the PAX goes into an idle state after inactivity, just sit with it for a few minutes, occasionally picking it up and moving it around. After three to five minutes, any odd smells should have dissipated.
How long does it take to charge a PAX 3?
It will take around three hours to charge the first time, but subsequent charges will be slightly faster. When the PAX 3 is on, shake it a few times to show the current battery level.
How to load a Pax 3?
To load Pax 3, first remove the magnetic chamber lid at the bottom. If you are vaping alone, load the chamber with 0.1 to 0.2 grams of weed and close it with a half-pack lid. If you are going to be sharing it with at least one person, load the chamber with about 0.2-0.3 grams. Remember, finely ground weed will produce thicker vapor.
How to change temperature on Pax 3?
Pax 3 offers full manual temperature control through the app—you just swipe left and right on the big green circle to jump for 5 degrees, or swipe up and down to change the temperature for one degree at a time.
How to connect a Pax 3 to a phone?
Pax 3 iOS app. To connect your phone to your Pax, turn on the Bluetooth option on your phone. Open the app, click on the Start button and choose the Pax 3 vaporizer. Turn on the vaporizer and shake it to turn the Bluetooth on (cool, huh?) and connect it with the app.
What to do when you unbox a Pax 3?
The first thing you should do when you unbox your new Pax 3 is to sterilize the device to get rid of the smell and chemicals left over from the manufacturing process.
How to dab a concentrate?
To dab a concentrate, remove the standard chamber, load the special concentrate canister with your favorite extract and set the device to the highest temperature. Have in mind that the higher the temperature, the stronger the effects will be, as more cannabinoids will get released.
How to use a PAX 3?
Turn the PAX 3 on by pressing the button on top, then hold it for a few seconds until the lights start to flash. Press the buttons to cycle through the heat settings -- we recommend the third heat setting, or three orange petals, to start with -- and hold the button for several seconds to lock it in. That should give you decently thick vapor, without any risk of that “burnt popcorn” flavor that less precise conduction vapes are known for. As the bowl starts to die off, bumping the heat level to the fourth setting, with four red petals, can help finish off an oven.
How long does it take for a PAX 3 to cool off?
If you set the PAX 3 down for around 30 seconds, the oven will start to cool off. This makes more efficient use of the battery, and keeps your herbs from cooking when you aren’t actively hitting it. When the petals turn blue, the vape is in standby mode. Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. After three minutes of inactivity, the PAX 3 will shut off on its own.
What does the 4th heat setting on a PAX 3 mean?
Usually, the fourth heat setting ensures you can just throw it out after the session. You may find that the herbs on top of the oven have a lighter color than the rest of the oven.
What is the best grinder for a PAX 3?
The PAX 3 works best with very finely ground herb. A two-piece grinder works best, but you can also turn over the grinding layers of the Planet of the Vapes grinder, or your favorite four-tier, so that the herb stays between the teeth longer.
How to change temperature on a vape?
To change the temperature, hold down the mouthpiece button for a few seconds , until the petals on the front flash. The petals will then illuminate to show your current temperature setting. Press the mouthpiece button to cycle through temperatures, then hold the button or shake the vape to set it.
Why do you need a PAX 3?
Of course, the real reason to buy a PAX 3 is for the herbal vaporizing potency, but the concentrate insert is a nice touch that adds a lot of value to an already impressive offering.
Which is better, PAX 2 or PAX 3?
While we wouldn’t recommend taking it much higher, that extra few degrees can really hone in the vapor production, with the slight cost of a drop in flavor. The PAX 3 has much better insulation than the PAX 2, so you don’t need to worry about burning your hands in the process.
Why does my Pax sit in the wrong orientation?
For one, heat causes the concentrates to soften , and leaving the Pax sitting in the wrong orientation could cause them to clog the air holes on the concentrate insert, or seep out into the oven. There’s also the issue of proper air intake.
When did the PAX 3 concentrate insert go away?
How to get the most out of your Pax 3 concentrate insert ... **The PAX 3 vaporizer has some features only accessible via a smartphone app. On November 15th, 2019, Apple removed all vaporizer apps from its store.
Can you put a pax in a hammock?
If you’ve ever tried to take your PAX into a hammock, you may have noticed it doesn’t work quite as efficiently. That’s because the PAX is designed to work best when turned upright, and that’s more important with concentrates for a couple of reasons. For one, heat causes the concentrates to soften, and leaving the Pax sitting in the wrong orientation could cause them to clog the air holes on the concentrate insert, or seep out into the oven.
Does a pipe cleaner help with vapor?
A few minutes with a pipe cleaner can noticeably improve vapor production and taste. That goes double for concentrates, which can gum up the works, so to speak. The included brush can help clear out the vapor path when the device has cooled down, although a pipe cleaner will do the trick if you already keep it clean.
Can you put concentrate in a PAX 3?
Keep it lightly loaded. Finally, the concentrate insert in the PAX 3 isn’t very large , and unlike herbal mixes, which should be firmly packed, air is your friend with stickier substances. A tiny drop of concentrate, about the size of a small pea, will ensure proper airflow and plenty of room to produce great vapor.
How to charge a PAX 3?
To charge the PAX 3, connect the USB cord into the charging dock and plug it into the USB port on your computer or charging device. Carefully mount the PAX 3 onto the cradle. The four petals on the front of the device show the battery level of the device.
What is a PAX 3?
What is the PAX 3? The PAX 3 is a handheld vaporizer that offers a convenient and tech-savvy way to consume cannabis flower and concentrate .
What is the unique feature of the PAX 1?
PAX 1 was unique in its portability and ability to operate discreetly. JJ O'Brien, PAX's Vice President of Strategy told Weedmaps News that it was the first vaporizer “that didn't look like a huge piece of cannabis paraphernalia.”.
What is a ploom vaporizer?
Back in 2012, when the adult-use cannabis market was in its infancy, a San Francisco-based startup called Pax Labs (actually, Ploom at the time) released a portable loose-leaf vaporizer that would end up shaping the future of weed consumption. At the time most vaporizers were bulky, stationary devices like the iconic Volcano.
How much does a Pax 3 cost?
The PAX 3 by Pax Labs starts at $199.99, and a Complete Kit for $249.99 includes a concentrate inset, half-pack oven lid, a multi-tool, and three replacement oven screens. (Photo by Gina Coleman/Weedmaps)
How long to wait to draw with a Pax?
Pax Labs recommends setting the device to a medium or high temperature and wait 10 to 15 seconds before drawing. Before removing the insert to repack the chamber, check to make sure the oven is powered off. The metal chamber will likely remain hot after use, so don't touch it.
Does the PAX oven have a lid?
PAX has also included a half-pack oven lid with the device, allowing users to pack smaller bowls for individual use. Compared with the standard oven size, which has the capacity for about 20 hits, this additional oven lid reduces the chamber size by half.