Apply only gentle pressure, twist the tank to loosen it slightly, and then twist it off by hand. Needle nose pliers work well because they have a point at the tips and are less likely to damage the glass on the tank. You can also use pliers to take out a stuck coil.
How to remove a vape tank coil?
Many modern vape tanks have coils that screw into both the top and bottom hardware. Sometimes, the coil will remain attached to the top half of the tank rather than the bottom. If this happens, you can remove the coil in the same way; just twist it counterclockwise. Grip the main body of the coil rather than the threading at the bottom.
How to keep your vape tank from getting stuck?
Make sure there’s always e-juice in your tank before you start vaping. Even when you take special care of your tank, you can never be sure that it won’t get stuck. For when this frustrating event occurs, it can be tempting to hammer your tank, or throw it against the wall just to get it open.
Can You rebuild your own coils when vaping?
When vaping, the usual stuff we do when we tinker with our mod and tank is cleaning, refilling, and changing the batteries. If you rebuild your own coils, you can add that to the list as well. But every once in a while, we do need to remove the whole tank or atomizer off for some general cleaning.
Why are my vape parts getting stuck?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device.
How do you unscrew a stuck vape coil?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do you get a stuck e cig tank off?
Vape Tank Stuck on ModPower off the device.Remove batteries where possible. Some devices may not be designed to have batteries removed. ... Figure out if your mod is broken. If the mod is broken, that may explain how your tank became stuck. ... If the mod is intact, try a better grip. ... Prepare to replace some parts.
How do you remove a Smok coil?
0:385:44How to change coils on SMOK Alien TFV8 TFV12 Series Vape Tanks + ...YouTubeStart of suggested clipEnd of suggested clipWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise.MoreWith the glass now gone we can unscrew the coil from the chimney turning counterclockwise.
How do you open a vape bottle?
To open a childproof e-liquid bottle, grip the bottle with one hand, then push the cap downwards and twist anticlockwise. It might take a bit more force than you'd think! You might need to repeat the downward push/twist motion a couple of times to finally get the cap loose.
How to stop a vape from getting stuck?
How to Stop Your Vape Tank From Getting Stuck. Make sure you are only tightening your tank enough to prevent leakage, as overtightening can lead to stuck parts. Having to retighten a tank is better than having to replace a setup. If parts of your device end up permanently broken and you need to purchase a new tank, ...
What happens when you get stuck in vape setup?
Stuck parts can happen to multiple different pieces of your vape setup. The mods and accessories that bring you a powerful vaping experience can be applied incorrectly or damaged during use. This can happen in multiple different parts of custom vape set-ups, as users have many parts to screw, unscrew, and replace over the lifetime of the device. ...
Why is my vape tank jammed?
Vape Tank Jam. In the case of jammed vape tanks, the primary cause is over-tightening. An over-tightened vape tank will be difficult to turn with your bare hands, so the best course of action is to find a material that can grip the tank better than you can.
What happens if you unscrew the tank?
If you are having trouble unscrewing the tank to replace e-liquid, you are dealing with a tank jam. However, if you are having trouble detaching the tank from your device, you need to unstick the tank.
What to do if your tank is stuck?
If your tank is truly stuck, prepare for some more fragile pieces to break in the process of fixing your tank. If you are still unable to fix the stuck tank, you may need to decide between getting an entirely new device or breaking a portion to get them apart.
Can you remove a tank stuck to a mod?
In some cases, your tank may simply be stuck to your device. This is a bit riskier since a botched fix would require more than simply a replacement tank. When attempting to remove a tank stuck to a mod, take care to avoid injuring the device or yourself via the battery.
How to get rid of a stuck vape?
Try wrapping your shirt tail (or the end of a clean t-shirt) around the stuck part of your vape, and possibly around the part you need to twist. Use the soft cotton fabric to ease the pain of ripping flesh when you try to wist so that you can safely grip the vape even tighter.
What does it mean when a vape is stuck to the battery?
If your vape tank is stuck -to- the battery or mod box, then now is the time to be really careful. Remember that the stuck position means your vape could theoretically still draw power and that your battery could take damage from your un-sticking maneuvers.
What to do if your tank is stuck to the lower half of the pen?
So the very first thing you should do if your tank is stuck to the lower half of the pen or mod is to drop the batteries out, if possible. This will take all the real danger out of the situation so the only remaining risk is accidentally damaging your rig or breaking the glass tank.
Can you open a freezer tank if it's frozen?
In other words, if the gasket is the problem, the freezer will loosen the connection and you'll have no trouble at all opening your tank once it's frozen. just be sure not to accidentally freeze your hands to the tank when you try to un-stick it for the first time out of the freezer.
Do you need a jar opener for vaping?
Don't have a jar opener? That's okay. Even more, homes have at least one pair of (possibly forgotten) rubber gloves. Check under the kitchen and bathroom sinks, in the utility drawers, around the laundry area, and in the mop bucket if you're not sure. These are thicker than jar opener pads, but give your hands the absolute bonus when it comes to pain-free friction applied to twist that vape tank.
Why is my vape tank stuck?
A stuck vape tank is caused by an increased friction between the rubber rings and the part where the tank unscrews. There a few tips to prevent this from happening. Regularly checking the O-rings. Old O-rings can become cracked, which means they can leak out e-juice. When the e-juice dries, it gets thick and sticky which will make your tank get ...
How to unscrew a tank?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
What happens when you top up e-liquid?
Be careful when you top up your e-liquid: All vapers have made a sticky mess when topping up their e-liquid. If the e-juice gets between your O-rings, the glass and the tank, it makes them sticky and difficult to move. So, be careful when topping up!
How long to put a scuba diving tank in freezer?
Freezer: Only try this one when the tank has been removed from the rest of the device. Put the tank in the freezer for 10-20 minutes, the cold temperature will make the parts contract and easier to loosen.
Can you vape a dry tank?
Do not vape a dry tank: When you vape a dry tank, the heat from the glass, the coil and the tank results in high amounts of pressure, which will vacuum the parts together. Make sure there’s always e-juice in your tank before you start vaping.
How to prevent a stuck tank?
To prevent stuck tanks, make sure you don’t screw it on too tight, and you clean your mod and tank at least every week. Clean the part in between the mod and tank to be sure no e-juice gets stuck and dried. After all, an ounce of prevention is worth 10mls of cure. OZ Vapour Team.
How to unstuck a tank?
If you can’t get a piece of cloth to grip your tank properly, and you can’t source a pair of rubber gloves, rubber bands can work. Get a piece of rubber band, wrap it around your tank tightly and securely, then twist it open bare handed. The added grip is usually enough to unstuck your tank.
What to wear to unscrew a tank?
2. Rubber Gloves. If you have a pair of rubber gloves, simply wear them to get a better grip on your tank. This works like a charm and I know a lot of vapers who’ve purchased a pair of rubber gloves simply to unscrew stuck tanks. Garden gloves work, but it fits hands a bit loose, lessening the stability of your grip.
How to disassemble a vape tank?
In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you’ve unscrewed the tank, you’ll have two halves: the bottom hardware with the atomizer coil attached and ...
Why is my vape tank not moving?
One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.
How to remove glass from a vape?
To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.
Why is my vape tank stubborn?
In some cases, a vape tank can simply be stubborn because the machining of the threads isn’t so good. That could be a sign that you’ve gotten a counterfeit tank, but it’s more likely just a case of subpar workmanship. Some vape manufacturers are better than others.
How to remove stuck glass from a tank?
Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.
ThatIrishGamerHD New Member
So I got my new coil and was vaping again but I must have over tightened the tank when screwing it on.Now it's time for a refill and I can't get this stupid tank apart.I have tried rubber gloves and I put it in the freezer for 10 minutes too but it won't budge.
TheRussianVaper Senior Member
You might have to force it, sounds like the ring got bunched up and stuck, so you might have to tare it and replace the ring. PS: I always lube the rings with a little bit of e- juice, makes it a lot easier later on and they last longer.
daviedog Vaping Master ECF Veteran
The rubber gloves as stated above do work,,but soak atty in PGA first. If there is any juice on your atty it will transfer to the gloves & you are SOL..
Andromendous Super Member ECF Veteran
You can fold up the rubber gloves and wrap it around the tank, then use the channel lock pliers. Ive done this a few times. As long as something thick is wrapped around it, it wont scratch it
Katcandoo Super Member Verified Member ECF Veteran
Happens to me all the time. I keep a pair of pliers and one of those flat rubber grippy jar opener things on hand. If you don't have a flat rubber grippy jar opener thing, a rubber band wound tightly on the base will work. Hold onto the base with whatever rubber thing you have, and use the pliers to (gently!) unscrew the top. Good luck!!!
