Prepare a new pod, and pull out the drip tip plug and the silicone cap. Insert the pre-filled pod into the mod and start to vape. KangerTech Surf Function/Indicator:
Should I upgrade to the kangertech subox mini vape pen?
If you are currently using the classic eGo-T Vape Pen or the Kangertech EVOD vape pen, this will be a noticeable upgrade that is easy to use but will provide a much better vaping experience. The Kangertech SUBOX Mini is a step up from the KangerTech Topbox NanoStarter Kit due to the noticeably larger tank and higher quality design.
How do I Fill my kangertech nebox with ejuice?
Once you have completely soaked your coil with ejuice, move onto filling your tank. Tilt the KangerTech NEBOX Box Mod to ensure you will not fill any juice down the center tube (this is where you inhale from).
What is the kangertech nebox box mod?
As opposed to other mechanical mods and regulated mods, the KangerTech NEBOX Box Mod is an all in one design which means the tank is actually in the body and housing of the unit. There is no RBA (Rebuildable Atomizer Coil/ Tank); however, there is a RBA deck which you can use to rebuild coils.
What are the features of Pangu vape tank?
High E-juice capacity: 6ml 3. A new vapor system, easy to change the E-juice 4. All-in-one through one-button operation 1. Built-in 2000mAh Li-Battery 2. Optional 4ml and 2ml E-liquid capacitu 3. Full power output 1. All-in-one kit 2. 2500mAh battery capacity 3. Top filling system 4. Both for MTL and DL vapers 1. PANGU Tank with 3.5ml capacity 2.
How do I get my Kangertech to work?
0:251:21Turning on a Kangertech Battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. SoMoreSo when you get your kit charge your battery. And then. I turn it on and now that's ready to go. So we'll just try it out. And all good so that's how you turn on a kangertech battery.
How do you fill a Kangertech vape pen?
0:060:51How To Fill A Kangertech EVOD - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank.MoreThe kangertech Evod is a button filling tank. To fill simply unscrew the bottom section of the tank. And fill down the side. Making sure not to get any liquid down the center hole.
How do you smoke an EVOD vape pen?
6:408:05EVOD starter kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt blinked at us we'll go ahead and check it yep it's lighten up so it's ready to go. So go aheadMoreIt blinked at us we'll go ahead and check it yep it's lighten up so it's ready to go. So go ahead and and press and hold the button and take a drag.
How do I open my Kangertech vape tank?
0:121:58How To Fill The Kanger TopTank Mini Top-Fill Tank - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the top tank mini in vertical position with the drip tip on the top unscrew.MorePlace the top tank mini in vertical position with the drip tip on the top unscrew.
How do you fill a vape pen?
0:161:35How to fill a vape pen with E juice - YouTubeYouTubeStart of suggested clipEnd of suggested clipScrew off the bottom nipple or straw piece base. You're gonna use your dabber your a juice tavernMoreScrew off the bottom nipple or straw piece base. You're gonna use your dabber your a juice tavern you're gonna fill up the atomizer to this side or on to the side of the atomizer itself.
How do you know when your Kangertech EVOD is charged?
2:164:37KangerTech Evod VV Battery Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust stay red the entire time they're charging. And then turn green to let you know they're doneMoreJust stay red the entire time they're charging. And then turn green to let you know they're done charging.
How do I turn on my Kangertech EVOD vape pen?
0:041:40Kangertech EVOD Battery. How to use instructions. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo basically this battery will come turned off so the buttom won't do anything but to activate theMoreSo basically this battery will come turned off so the buttom won't do anything but to activate the device just simply click the button five times fast in a row and it will flash.
How do you use a push button vape pen?
How to turn on/off a vape pen?Press the button rapidly 5 times.Notice the light on the button flashing.The battery is now activated, you can push and hold the button as you're inhale your vape.Rapidly click the button 5 times to turn the battery off.
What happened to Kangertech?
Kangertech decided to try and change the game again by taking the ideology of the topbox and merging it into one, single product. The Nebox was introduced in 2016 and did great at first.. Until all the leaking issues happened. The Nebox fell short of being successful because no matter you did, it would leak everywhere.
How do you take the coil out of a Kangertech?
0:582:55How To Change a KangerTech Atomizer Coil - @VapeTechManYouTubeStart of suggested clipEnd of suggested clipOkay simply unscrew the existing coil. Now we need to clean that inside just to get rid of anyMoreOkay simply unscrew the existing coil. Now we need to clean that inside just to get rid of any excess liquid that may have seeped into creases take the new coil it should be a 1.8. Or 2 ohm.
How do I use my Kangertech Kbox mini?
1:368:04KangerTech SUBOX Mini C Starter Kit | Overview & How To Use - YouTubeYouTubeStart of suggested clipEnd of suggested clipDisplay on here fire button up/down buttons micro USB port that is it there's no switching the menuMoreDisplay on here fire button up/down buttons micro USB port that is it there's no switching the menu system at all it's just simple it shows you your battery life the resistance of your coil.
How do you fill a Kangertech Nano?
0:000:56How To Fill The Kanger TopTank Nano - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then down those slots on the side and just in the directions house make sure to not go up on topMoreAnd then down those slots on the side and just in the directions house make sure to not go up on top up above that middle tube which is almost all the way to the. Top. Like that put the top back on.
How to Use Kanger Surf Pod
Surf Pod Kit by KangerTech is equipped with a disposable 1.2mL pre-filled pod and a coil of NiCr 1.6Ohm. The built-in 300mAh battery can ensure a long time vaping. No-button design makes the whole operation pretty simple and convenient. The small and exquisite appearance makes it quite portable.
Kanger Surf Operation
Prepare a new pod, and pull out the drip tip plug and the silicone cap.
Download the Kanger Surf Manual
Kanger New Pod, Surf Kit Hey, I am very happy to share a new product with you. Kanger is a veteran...
What is a Kangertech Subox Mini?
Well, let me put it lightly, the Kangertech SUBOX Mini starter kit (Kanger KBOX Mini) is a must own box mod for ALL vapers! Easy to use, yet extremely powerful, the Kangertech SUBOX Mini box mod packs a serious punch with a smooth warm vapor. This box mod has the ability to switch between the replacement OCC (organic cotton coils) and the Kanger RBA deck for the advanced users. This kangertech subox mini review and overview is more of a tutorial on the kangertech subox mini, more than an in depth review on vapor production and internal components of the device. Many people love this device for the kangertech subox mini OCC coils and the subox mini battery which uses a 18650 IMR Battery. Check out the Model-C Version
How much ejuice to soak a cotton tank?
What you want to do is take one drop at a time on the edge of the center tube to soak the cotton. You will only need about 2-3 drops of ejuice to completely soak the center cotton.
How to use OCC coil?
You want to start by soaking the OCC coil in both exposed air holes to allow ejuice to completely soak into the cotton. Take an ejuice dropper to drop a single drip of ejuice in both holes, one at a time, letting each single drop completely soaking in before another drop is made. Once you have multiple drips on both sides of the OCC coil, you want to make sure the ejuice is completely soaked into the cotton before the next step.
Does the Kbox mini come with a plastic sleeve?
After you have un-boxed the Kangertech SUBOX/ KBOX Mini , it will come already assembled with a plastic sleeve around it for protection against scratches. Remove the plastic sleeve from the housing and unscrew the Subtank Mini from the KBOX housing unit. You can remove the Subtank by twisting counter clockwise.
KangerTech NEBOX – Box Mod Setting Up, Filling Tank and Overview
This is an overview of the KangerTech NEBOX and Instruction Guide for setting up, using and getting started. Setting up the KangerTech NEBOX Box Mod is fairly simple and we will show you how easy this mod is to use.
Step 1 – Unscrew the Tank Housing with the Provided Key (Quarters and Nickles work as well)
First you want to unscrew the main tank component which holds your coils. Weather you are using the RBA deck to re-build your coils or using the coils that KangeTech provides, this section will hold and house your coils. This component can be unscrewed with your fingers; however, using the provided key or a quarter will be a little easier.
Step 3 – Tilt the body of the NEBOX Box Mod and slowly fill the large 10ml volume tank
Once you have completely soaked your coil with ejuice, move onto filling your tank. Tilt the KangerTech NEBOX Box Mod to ensure you will not fill any juice down the center tube (this is where you inhale from).
Step 4 – Screw on the SSOCC Coil and Housing unit back onto the body of the NEBOX Bod Mod
After you have reached the level you are comfortable vaping with, screw back on the coil component and tighten it down with the provided key or a quarter. CAUTION: do not over tighten.
Step 5 – Unscrew the IMR Battery housing with the provided key (Quarters and Nickles work as well)
After you finish screwing on your tank and coil section, start by wiping down the NEBOX Mod if you have spilled any ejuice. This will prevent from any ejuice leaking into you IMR battery section. Unscrew the IMR battery section with the provided key.
Step 8 – Screw on the IMR Battery component with provided key
Here is where things can get a little tricky. For some reason, it is somewhat of a pain to screw on the IMR battery cap while there is a battery in the unit. If you find that this is happening to you, be patient, THIS IS NORMAL. You have to get the threads just right in order for the IMR battery cap to go one effortless.
Step 9 – Adjusting temperature controls with the NEBOX Box Mod
There are many controls on the KangerTech NEBOX Box Mod. We will list them out for you so you can understand what you are doing and what all the settings mean.
