Your Joyetech eGo AIO Kit comes with 2 coils. To replace your coil, press down on the cap and twist to unscrew it. The top cap is connected to the coil; simply unscrew the old one and attach a new coil.
Full Answer
What is Joyetech ego AIO vapor pen?
Prime the coil by putting some drops in the edges (or flood centre) of the open end. Let coil sit upright for 5 minutes (or longer) to let it soak before screwing it into the cap. Fill your tank to the max mark line and screw in the cap. Watch for escaping bubbles while coil is wicking (for a …
How do I use my Joyetech ego AIO kit?
Replacing the coil. Your Joyetech eGo AIO Kit comes with 2 coils. To replace your coil, press down on the cap and twist to unscrew it. The top cap is connected to the coil; simply unscrew the old one and attach a new coil. We recommend changing …
Why does my Joyetech ego AIO kit have a burnt taste?
· 1. Uninstall the mouthpiece and glass tube. 2. The atomizer head is located right on the base. Always drip a few drops of e-liquid into the head before use to get it soaked. 3. Screw the tube back onto the base tightly. 4. Fill the e-liquid into the tube directly. 5. Put the mouthpiece back on. Note: Please do NOT wash the atomizer head with water.
Is Joyetech ego AIO UL certified?
Once you have all your pieces laid out in front of you, take one atomizer out of the package and your Joyetech AIO vape pen then set everything else aside. You will need to prime your atomizer with e liquid for it to get saturated before you start vaping, for this atomizer you need to drip 5-6 drops of e liquid directly down the small hole at the top of the atomizer itself.
How to change coils on Joyetech Ego?
To replace your coil, press down on the cap and twist to unscrew it. The top cap is connected to the coil; simply unscrew the old one and attach a new coil. We recommend changing your coil every 1-3 weeks, depending on usage. If your kit starts producing lower quality or less vapour than before, or the flavour begins to deteriorate, you'll know it's time to change your coil. Replacement coils are sold here; the coils supplied with the kit are 1.5ohm, though you can also buy sub-ohm coils for the AIO, which are designed for use with higher-VG liquids.
How to use Joyetech AIO?
Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2.
What to do if Joyetech AIO battery is dead?
It won't charge/the battery is dead. If your Joyetech AIO battery is not charging, firstly try plugging it into a different USB port or wall socket. If this doesn't work, try a different charger, but make sure you are using a Joyetech AIO USB cable. If you have a spare kit, try charging the spare to rule out a faulty charger.
How to fill a e-liquid tank?
To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid directly into the tank, making sure not to fill above the max fill line (2ml). If you fill your tank above this line, you'll find that the tank overflows when you try to replace the top cap and coil.
How long does it take for a vape to sit?
This happens when you attempt to vape when the tank is empty, or when you don't realise the e-liquid level has run low, or if the coil hasn't been primed (after refilling, drip a couple of drops of e-liquid into the coil, then allow the tank to sit for 10-15 minutes once the coil is in place).
How to adjust airflow on a cigarette?
Twist the ring on the top cap to adjust the airflow. Depending on your preference, you can opt for a more open draw (airflow more open) or a more restricted, cigarette-style draw (airflow more closed). The airflow is at its most open when the two dots on the cap line up; any movement left or right will give you a tighter draw.
How to turn on a vape?
To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way.
What is Joyetech Ego?
Joyetech eGo AIO ECO is an all-in-one starter kits for starters, advanced and experienced vapers, featuring 650mAh internal battery, all-new BFHN 0.5ohm head, ultra efficient low wattage technology with 1.85V constant voltage output, two drip tips, dual circuit protection, side charging port, and illuminated 7 color LEDs.
What is Joyetech ProCore Air?
Joyetech ProCore Air is an innovative vape tank with push-open top filling system and ProC series which...
How to use a vaporizer on a vaporizer?
1. Uninstall the mouthpiece and glass tube. 2. The atomizer head is located right on the base. Always drip a few drops of e-liquid into the head before use to get it soaked. 3. Screw the tube back onto the base tightly. 4. Fill the e-liquid into the tube directly.
How to change atomizer head?
Change the atomizer head: When you’re in need to change the atomizer head, empty the e-liquid first to avoid leaking into the base. (Clean it in time when there’s e-liquid on it) Put the device upside down, remove the mouthpiece and glass tube. Replace the head with a new one and install it onto the base tightly.
How to vape with a fire button?
Vaping: Hold the fire button and inhale. Release to exhale.
What are the risks of using a nicotine patch?
1. Keep out of reach of children.#N#2. This device is not recommended for use by people under 18 or non-smokers.#N#3. This device is not suitable for use by pregnant or breast-feeding women.#N#4. This device is not suitable for use by people who’re allergic or sensitive to nicotine or those who can’t use nicotine products for health reasons.#N#5. This device is not suitable for use by people who has cardiovascular disease or respiratory disease.#N#6. This device is not suitable for use by people who disease like cardiac dysfunction, high blood pressure or diabetes.
Where do you fill the E liquid in an AIO?
If your AIO is split two different colors, for example red and white, you should see where the two colors meet at the glass window; if you have a solid colored AIO there should be a line half way up the glass window, off to the side, that reads “MAX.” Whether you have a split color meeting or you have a line, that's where you fill the e liquid up to. If you go past that line, the e liquid will over spill once the top cap with atomizer is attached.
How much liquid do you need to atomize a vape?
You will need to prime your atomizer with e liquid for it to get saturated before you start vaping, for this atomizer you need to drip 5-6 drops of e liquid directly down the small hole at the top of the atomizer itself.
Why is my vape pen blinking?
If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.
What does the LED light on an AIO mean?
The little LED light inside your AIO is a lot more useful than you may think, there's actually a series of light sequences that signifies different warnings. If you notice, when you press the button the LED light comes on and when you release the button the light goes away then comes back on a second later.
How to keep atomizer from spinning?
Once you get the atomizer screwed onto the threads, the atomizer will just keep spinning the child-lock once it gets tightened to a certain degree, so at that point you need to push down on the child-lock ring on the top while simultaneously screwing the atomizer on tight.
Can you fill up Joyetech AIO?
Now that you've got the atomizer primed and installed it's time to fill it up. The Joyetech AIO uses the same access point to fill up as it does to change out the atomizer, so before you reattach the cap you have to add some e liquid to the tank.
Can you use a vape pen without an atomizer?
Some people are a fan of one or the other and some people can't notice a difference so just go ahead and try them both out to see how you like them. Your vape pen should come turned off without an atomizer installed, you will need to turn it on, install a primed atomizer and fill it up with e-liquid to begin vaping.
What is Joyetech Ego AIO?
The Joyetech eGo AIO (all-in-one) battery and tank combo is perfect for those who want great performance with an easy to use system. The eGo AIO features a childproof pressure twist cap on the tank, as well as a five click on/off feature. The battery has dual circuit protection, providing protection from over-charging, over-current and over-discharging. It’s sleek and compact design make it perfect for vaping on the go, and comes in many different stylish colorways.
How to fill a ejuice tank?
-To fill your tank, press down and twist on the top cap to unlock your tank. Fill with ejuice to the desired level , making sure not to overfill past the max level line. Also be sure to properly prime your new coils prior to first use to avoid dry hits.
Product Details
The Joyetech eGo AIO Mouthpiece Replacement is the original drip tip especially designed for Joyetech eGo AIO Kit. Featuring spiral structure design and environmental heat-resistant plastic, the eGo AIO Mouthpiece protects against spit-back, also makes vapor thicker and long time taste.
Also Purchased
The FreeMax Maxus Max 168W Kit is a compact yet powerful pod mod system of FreeMax Maxus series. Powered by dual 18650 batteries (Sold Separately) for long-lasting vaping, the Maxus...
eGo AIO vs Pen 22: Size and Style
Although SMOK and Joyetech have both earned a reputation for their simplistic, sleek approach to vaporizer designs, the two brands definitely have very different signature styles. Many vapers find each brand’s vapes so distinctive that they’re able to recognize the maker right off the bat.
Examining Battery Power
Another notable difference between the two vape pens is their battery power. Although they vary by just 150mAh, for some vapers, that might be a big deal. The SMOK is marginally more powerful at 1650mAh, while the Joyetech maxes out at 1500mAh.
Ease of Use, Flavor, and Overall Performance
You can be confident that one thing these two starter kits share is excellent vapor and flavor production. Both Joyetech and SMOK have built a reputation as flavor experts, crafting devices that stay true to the taste of your favorite e-juice. Vapor production is similarly satisfying as well.
The Final Verdict
When it comes down to it, both the Joyetech eGo AIO and the SMOK Pen 22 are excellent vape pens, outperforming many other brands and earning top ratings across the board. The differences they do have could be a deciding factor for some vapers, particularly those that are looking for something with specific features.
