Push forward the battery cover and put two high-rate 18650 cells into the battery body. Press the fire button 5 times in quick succession to turn the device on and off. Note: (1). Please adjust the wattage to a proper range to match the atomizer you used before using.
Full Answer
How to use wismec CB-80 vape kit – user manual?
Sep 21, 2017 · How to turn key lock on and off!Reuleaux RX 2/3 RX200 RX300 wismecBig thank you to soundcloud artist: Pump Your Sound & W. A. Production! Music Info Below!ht...
What are the similarities between wismec and Jaybo’s box mod designs?
Feb 20, 2019 · Powering ON and OFF the device: Press the fire button 5 times quickly. Using the Stealth Function: With the device on, press and hold both the fire and down buttons together. To turn off Stealth mode just repeat the process. Adjustment Lock Function: With the device on, press the up and down buttons together.
How do I use wismec If I have a newer Mod?
Sep 14, 2021 · WISMEC LUXOTIC MF BOX July 25th, 2018. CB-80 June 5th, 2018. WISMEC LUXOTIC NC April 18th, 2018. Reuleaux RX GEN3 Dual March 27th, 2018. WISMEC LUXOTIC BF BOX January 18th, 2018. Reuleaux RX2 21700 January 18th, 2018. SINUOUS RAVAGE230 December 19th, 2017. CB-60 November 7th, 2017. Reuleaux RX2 20700
How do I set the timeout duration on my vape?
Welcome to Wismec Support We’re Here To Help! Download Manuals and Software, FAQ, check authenticity of Wismec products. FAQ Frequently Asked Questions about Wismec products. Learn more Technical Specification Check the technical characteristics of Wismec product in details. Learn more Serial Number Please enter your security number Contact If you have any sales …
How To Use The Reuleaux RX200 Box-Mod: Basic Setup
Powering ON and OFF the device: Press the fire button 5 times quickly.
How To Use The Reuleaux RX200 Box-Mod: Vaping Modes
Switching between TC/VW modes: With the device on, press the fire button 3 times quickly and then use the up or down to select the desired mode and press fire button to confirm the selection.
How To Use The Reuleaux RX200 Box-Mod: Safety Features Explained
No Atomizer Alert: If no atomizer is detected the OLED screen displays “No Atomizer”. This usually means that you’re atomizer isn’t connected properly; make sure the tank is secured properly – this usually fixes any issues. If that doesn’t work… make sure you actually have a coil installed.
How To Use The Reuleaux RX200 Box-Mod: Best Practices
Some atomizers have a longer 510 than others. One should be careful to not over tighten the atomizer onto the mod as this could damage the 510 connection.
How To Use The Reuleaux RX200 Box-Mod: Updating The Firmware
To update the firmware on your Wismec Reuleaux first visit Wismec’s website and download the firmware updater for your device — Mac and Windows are supported.
Wismec Reuleaux Rx gen3 Review
The RX Gen3 integrates some of the features of those devices that made them so great, like a power output of nearly 300W in a device that is small, and portable. Another similarity to those antecedents is the box mod design, which was done by JayBo and features a central 1.3 inch OLED screen and three-button control.
Special Traits
So the “3” in the Gen3’s product title not only refers to its place in the Reuleaux lineage, but it also relates to the three 18650 batteries needed to power the device. Three batteries! In a device that measures only 114mm in height with the tank attached, and a little less than 50mm in thickness.
My Experience Using the Gen3
Wismec and JayBo have wisely decided to go with a similar user interface (practically the same) on the RX Gen3 as most of the other Reuleaux models. The vaping output modes on the Wismec Reuleaux RX Gen3 are also little changed from past iterations.
Vaping All That Flavor
The two coils that come with the Wismec Reuleaux RX Gen3 kit lean more towards flavor purists than cloud chasers. The coils don’t come anywhere near to handling the output that the RX Gen3 can muster but that’s not necessarily a bad thing, especially for those of us who like to savor our clouds, rather than our clouds savoring us.
The Reuleaux RX Gen3 and Other Good Box Mods
Now it would be easy to compare the Reuleaux to its brand-mates, the RX200 or RX300, but I thought about how it would fare against a device from another brand, Vaporesso, and their most potent device to date, the Vaporesso Revenger 220W mod.
A Pocket Cloud-Chucker
I, for one, was pleased to see another Wismec/JayBo collabo’ land on my desk. Especially after the lackluster performance of the Sinuous FJ200. It was good to see a familiar face, although the face was a little too familiar.
How to repair a Wismec?
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.#N#2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.#N#3. Keep away from water.
How to connect a new atomizer to a new atomizer?
Press the right regulatory button to confirm that a new atomizer has been attached. Press the left regulatory button to confirm that the same atomizer has been reconnected.
How to switch between VW TC and TCR?
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode. Press the fire button to confirm.
What is TCR mode?
In TCR (Temperature Coefficient of Resistance) mode, users can set the parameters according to the TCR of coil.#N#The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right regulatory button simultaneously, then you enter into the TCR set menu:
What happens if a new atomizer is not cooled down?
In TC mode, be careful to attach new atomizers that have cooled to room temperature. If a new atomizer has not cooled down before attaching, the temperature may read and protect incorrectly until the new atomizer cools.
What is the function of a micro USB port?
Micro USB port function: The USB port can be used for charging and upgrading firmware. It is better to take out the cell and charge it through external charger. 5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees.
