About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice. Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away.
Why does my vape keep spitting?
Dec 01, 2020 · To break it down, your vape spits liquid at you merely because it has wicked more liquid than the amount that your coil could atomize. Or in other words, your cotton wick just doesn’t have the ability to soak up all the juice, thus leaving some of them pooling on the coil. We also refer to such a situation as “flooded coil.”
How do I Stop my vape coil from spitting and popping?
Dec 04, 2020 · About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice. Take a moment to imagine what happens if you sprinkle a few drops of water onto a hot pan; the liquid bubbles about, unable to withstand the agitation of direct heat and flies off in any direction to get away.
Why can’t i pop my vape juice?
Having too much vape juice in your tank can cause a flood in your coil and therefore vape spitting. Careful not to over-prime the coil Priming your new coil is important to avoid dry hits. However, if you want to avoid vape spit, then you need to make sure you don’t over saturate the chamber.
Why is my vape coil gurgling?
Nov 03, 2021 · When you are vaping, there is an exchange of airflow that moves through the device's chimney. If the area is too small or constricted, there is a good chance that the juice and condensation can build up. This build-up may lead to that spitting sound that you are working to stop. Again, many different devices have differing chimney sizes.
What prevents e-juice from leaking out?
There are tiny rubber rings in a vaping device’s tank that prevent the e-juice from leaking out. When they are worn out or damaged, the liquid is bound to spill over.
Can you add e-liquid to a vape coil?
While priming the device’s coil by adding e-liquid to it before a vaping session will significantly improve the vaping quality, it will mess up the entire experience if it’s not done right.
Can you drown a vape coil in e-liquid?
When your device is constructed with a rebuildable atomizer, you need to exercise caution while dripping the vape e-liquid. At no point must the coil be drowned in the e-liquid.
Can vaping cause popping?
Spitting, leaking, and popping are very common problems in a vaping device. No need to worry though since most of the time, every problem can be resolved with a simple fix that wouldn’t even take five minutes of your time.
Why does my vape tank leak?
Leaking happens when e-juice escapes from your tank, usually through the airflow system. Depending on the reason behind it, leaking can range from a few drops of e-liquid, to having your tank emptying all of its contents all over your vape mod. It’s a common problem with even the most popular sub ohm tanks.
What does it mean when your juice tank is cracked?
A thin crack in the glass or a piece of bent metal can mean the tank is no longer airtight, allowing the juice to leak out and into the air hole valve. If your glass is cracked it is usually an inexpensive and simple solution to buy a replacement.
Why do multi strand coils pop?
Multi-strand coils often pop and spit due to their design. Twisted coils in particular have a bad reputation for this, but Clapton coils may have the same issue. Their design makes it easier for e-liquid to pool on the coil, and so sometimes it’s hard to entirely avoid popping on these coil types.
How to keep a water tank from leaking?
Watch out when filling – Never overfill your tank. Always leave a small air pocket at the top when filling. This empty space will help prevent any liquid from leaking out. Also make sure not to fill it too quickly or you can risk flooding the tank. Check for cracks – Check your tank for cracks or other damage.
How to stop vaping from spitting?
Stop your vape spitting by cleaning regularly. 1. Prime your vape coils. For one thing; prime patiently! The right way to prime is to simply ‘paint’ the exposed cotton with a miniscule touch of vape juice, and then be sure to still wait 5 minutes or so before first firing up your unit. 2.
When did Aiden start vaping?
Aiden started vaping in 2012 and hasn’t looked back since. He has been working in the vape industry for 5 of those years, and now creates content on various channels covering a vast array of vaping topics.
What is a spit guard?
There are several drip tips and mouthpieces available that come fitted with a spit guard, effectively a honeycomb or mesh design with holes that are smaller than the agitated vape juice droplets, ensuring the mouthpiece will always be able to catch them before they reach your lips.
Why does my vape spit?
The cause of vape spitback is because e-juice is pooled up on the coil and is cooking, rather than being vaporised as it should be. This flooding can be caused by a number of factors such as over saturating your coil and using the wrong vaping technique for your device (ie trying to do direct to lung using mouth to lung kit).
Remove excess liquid
In your vape tank there will be a centre post. When excess e liquid runs down the centre it falls into the middle of the vape coil. To clean this up and take a piece of tissue and push it down the centre of the tank to clean out the excess ejuice.
Careful not to over-prime the coil
Priming your new coil is important to avoid dry hits. However, if you want to avoid vape spit, then you need to make sure you don’t over saturate the chamber. This can cause a flood of eliquid and spit back as a result.
Try a thicker e-liquid
If you are using a big cloud kit and a high PG eliquid then you will be more likely to flood the atomiser. This is because PG is much thinner than VG. VG is thicker and therefore slows down the wicking. Shop high VG eliquids >
Close the airflow a little
To prevent too much e juice reaching the coil you could reduce the airflow on your tank.
Adjust the power
When you vape with low wattage you may find that you are not vaping the e-liquid quickly enough for your wick. Up your watts by 5-10 if you have a variable wattage mod.
Fire her up
Before you take a drag on your vape, try pressing the fire button. You should hear those dreaded spitting and popping sounds fade into the distance. Once they have stopped, try giving it a vape.
1 min
This review aims to answer the questions like why is my vape popping or and share on some tips and tricks an inexperienced user would cherish.
E-Liquid Ingredients
Let’s speak of the propylene glycol. This wonderful substance allows for great clouds of flavor, but it’s also thin and should be approached with logic. Being lightweight, it vaporizers at low temperature and does it fast.
Coil Design
The coil is the best man of the vaping party, meaning that it should keep everything hot. Logically, the bigger the coil area is, the hotter e-liquid gets. We have twisted, braided and Clapton coils which all work well, but have plenty of nooks and crannies that collect the e-liquid.
Wide Airflow Setting
What should you do if you prefer some cooler vape? You try not to increase the wattage and keep the coils colder. But if you don’t do anything with the amount of e-liquid preset to the hotter vaping mode, it will collect in the atomizer and will fly up at some point.
Flooded Atomizer
This is the ultimate answer to the question “Why does my vape pop?” With the rebuildable atomizers, a vaper is a person that sends e-liquid to the coils. If the atomizer has too much of juice, it will push it back, and even if not, you’ll have the decreased vapor production.
