How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
How to use a vape pen?
Click the button five times to start the vape pen. When the indicator light is on, put the mouthpiece to your lips and draw in a breath of the atomized e-juice of your choice or flavor.
What is the best temperature setting for vaping?
I found the middle temperatures of 350°F and 390°F to hit the sweet spot of strong vapor and nice clouds. The higher temperature settings give you bigger clouds and harsher vapor, especially with the dual quartz coils. The resin mouthpiece helps a lot with higher temps since it helps to cool down the vapor before it reaches your mouth.
How to vape like a pro?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing. That's it you're done!! You are now Vaping like a PRO!
Their Design
Their Performance
How do you use a prism vaporizer?
0:234:20Kandypens Prism and Prism Plus - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can charge it with your Apple adapter a very nice feature I found. But let's turn it on. And.MoreSo you can charge it with your Apple adapter a very nice feature I found. But let's turn it on. And. I like to use it on the blue. We're gonna get it to where it's the blue temperature setting.
How do you use a Kandy pen prism?
0:232:15KandyPens Prism Vape Pen - How To Use - azWHOLEistic - YouTubeYouTubeStart of suggested clipEnd of suggested clipIs a ceramic coil. So it's just a ceramic chamber. You drop your material in there. You put theMoreIs a ceramic coil. So it's just a ceramic chamber. You drop your material in there. You put the mouthpiece back on very simple to use. We turn it on one two three four five. And it's going to blink.
How do I change my vape pen settings?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
What color is the highest vape setting?
The v1 has three heat settings denoted by different colors– green is low, blue is medium and red is high. To adjust the heat level, press the button three times, and the color will change along with the setting. For the best flavor and oil longevity, we recommend using your v1 on low heat.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
How do I get the best flavor out of my vape?
The 10 Best Ways to Enhance Vape Juice FlavoursChange Your Wattage and Temperature. Just like any reaction between heat and flavour, temperature affects how things taste. ... Avoid Vaper's Tongue. ... Proper E-Juice Storage. ... Limit Airflow. ... Get A Good Atomiser. ... Below-coil Airflow. ... Get a Narrow-bore Drip Tip. ... Keep Everything Clean.More items...•
What heat setting should I use on my DAB pen?
For dabs (wax), set your pen between 4.0V-4.3V. Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment, set the voltage at 4.0V.
What temp should my vape mod be at?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What does the green light mean on a vape?
charging. The blinking green light indicates the battery is charging. When fully charged, the green light turns solid. The length of time the blinking green continues depends on how discharged the battery is.
What is the KandyPens PRISM+ vape pen?
The Kandy pens PRISM+ vape pen is a new introduction supposed to improve the initial PRISM vape pen. This pen is assured to give vape users a different experience because it presents some cutting-edge features that you would love to see.
What size battery does the PRISM+ have?
The PRISM+ comes with the standard KandyPens battery, which is barely taller than the previous PRISM model. And has a width of 20mm. The pen feels heavier but not difficult to carry around.
How much battery does a vape pen have?
The device is solid, and the capacity is solid and more significant than the PRISM version. The vape pen comes with a 900mAh battery but a bit sturdy. You only get the USB charging port and not the iPhone charging technique.
What is a PRISM+ vape pen?
The Kandy pens PRISM+ vape pen is a new introduction supposed to improve the initial PRISM vape pen. This pen is assured to give vape users a different experience because it presents some cutting-edge features that you would love to see.
How tall is a vape pen?
When it comes to portability, the vape pen is slightly above four inches tall. It stands out in portability and is a bit bigger compared to the original pen. But despite its increased size, you can comfortably put it in your pocket and do not even remember it is there.
How many times do you change the temperature on a vape pen?
If you want to change temperatures, it is straightforward to go by the process. Like the vape pens you are already used to, all you need to do is click three times and change them five times to turn it on or off.
Does Kandypens Elite work with PRISM?
The KandyPens comes with two standard atomizers are the quartz double-coil and coil-less ceramic plate atomizer. This PRISM+ does not work with KandyPens elite, galaxy, gravity or donut atomizers because the PRISM is 510 threaded and not an eGo type battery.
What are the advantages of ceramic coilless atomizers?
Taste and smoothness are the biggest advantages of ceramic “coil-less” atomizers like this one, it heats your concentrate more gently then an atomizer with a wire coil does. This also results in a higher efficiency so you end up using less material with the ceramic.
What is the port for a vape pen?
The other port is micro-USB which is the industry standard for vaporizers and is also used by many other electronics, including cellphones. Battery life is above-average for a vape pen of this size, and when you use the ceramic coil it really stretches out your concentrate.
How many mAh does a sub ohm battery have?
The sub-ohm battery has a 320mAh capacity which is pretty good for such a small piece. Pairing that with the low-power-consuming ceramic atomizer gives you quite a bit of usage before it’ll run out of charge.
Does the Prism atomizer have a second coil?
The Prism comes with a second atomizer as well, and this one is a dual-quartz coil in a quartz dish with a titanium wire heating element. The vapor will not have the same flavor and intensity but you’ll be able to get bigger clouds with shorter pulls since the wire heats up a lot faster than the ceramic.
Can you use dual quartz coils?
When you use the dual quartz coil you can get lots of vapor from it even on the lowest temperature, so just remember that you use that one differently. You also don’t need to draw from it as long as you do with the ceramic to get a big hit, just a few second pull will usually suffice.
Can you use thin oil in a pen?
Both atomizers are also sealed up and leak-proof with a silicone plug that’s placed inside the coil at the bottom, and it’s food-grade and non-toxic. This means you can use thin oils in this pen and it won’t leak out the bottom onto the battery connection.
How tall is the Prism?
Both the Prism and the Prism+ are just about four inches tall and very light, making them both highly portable, yes, even the wider Prism+. You just have to be careful about their exposed resin mouthpieces when they’re being transported since they can get dirty if you’re not careful.
What temperature do ceramic coils come in?
They both give you four temperature selections to choose from, ranging from 320°F up to 430°F.
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
Where do you fill a pod?
First off you will need to locate the filling cavity on your pod. Most pods are either filled from the top or from the side, but this will be clearly indicated on the packaging or in the manual.
How long should I let my pod sit before using it?
This is an important step to get the optimum flavour and experience. Let your tank or pod sit for 5 minutes before you first use it.….yes I know you feel like you have waited long enough…but trust me it will pay off.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
What is it called when you test your vape pen?
Most vapers test run their pens without any juice or vaping material for the first time. This is known as priming.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
How many clicks to change heat setting?
Three clicks to change the heat setting.
How long does it take for eliquid to soak in a coil?
Please wait 5 minutes for the e-liquid to soak into the coil completely.
Do vape pens have the same parts?
Before asking questions, it’s necessary to know the components of a vape pen. In fact, most vape pens have the same parts, though some will differ slightly.
How does vaping work?
Vaping allows you to inhale nicotine by heating the e-liquid to produce vapor. This satisfies nicotine cravings, but also mimics the sensation of smoking, by providing a “throat hit” that many smokers have become accustomed to. Depending on your previous smoking habits, choosing the right nicotine strength in your e-liquid is essential to enjoy a satisfying vaping experience. What E-liquid to choose?
How much nicotine is in a MTL?
MTL vaping can use nicotine strengths anywhere from 3mg/ml to 50mg/ml (20mg/ml max in Europe). We recommend starting at 12mg/ml and adjusting as required.
What is an e-cigarette?
An e-cigarette is a device that heats e-liquid, turning it into vapour, which delivers nicotine and flavours. E-cigarettes were designed to help smokers transition from cigarettes. Millions of people around the world say that vaping has helped them transition from smoking.
What are the components of a vaping device?
Though vaping devices come in all shapes and sizes, they can typically be broken down into two key components: the battery and the atomiser. Let’s start by looking at the battery portion of a typical vaping device.
Why is it important to treat your Innokin?
Treating your Innokin device with care is important in order to achieve a consistent vaping experience. Let’s start with setting up your new device for the first time.
What is the atomizer part of a vape?
The atomiser portion of your device turns e-liquid into vapour and holds a reserve of e-liquid, ready to be vaped. The atomiser can be broken down into two key components: the tank/pod and the coil.
How long to prime a coil?
5. Fill atomiser with e-liquid and allow the coil to saturate (prime) for 10 minutes.
How much power does a Smok X private have?
With the SMOK X-Priv Mod in particular, you’ll be able to reach up to 225 watts while firing as low as 0.1-ohm while in its wattage mode. You also have three different output modes to choose from that can alter your experience, which includes Hard, Normal, and Soft settings. Like past SMOK mods, the X-Priv also offers a full temperature control suite, which has support for Ni200 Nickel, Titanium, and Stainless Steel materials. In addition, you enjoy using its adjustable initial resistance, adjustable TCR, and its preheat capability. Lastly, using the temp control mode will sending you soaring upwards of 600 degrees Fahrenheit and will allow you to fire as low as 0.05-ohm without any worry!
What is a SMOK X-Priv box?
The SMOK X-Priv Box Mod is a new addition to the Priv Series, building upon its success and delivering another line-up of innovative and highly appealing products. The X-Priv branches from the long list of Priv branded devices and now shoots for a more appealing appearance, a compact design, while dishing out the same great power we’ve all come to enjoy with past SMOK mods.
How to verify a smok?
First, use your phone or PC and visit the official SMOK website. Once you’ve navigated to the website, navigate to the SMOK support page. Next, you will want to find the packaging that your SMOK X-Priv Mod came in and scratch off the coating on the security label. The security label is often on the right side of the box, next to the barcode. Once you scratch it, you will see a code that you must input into the field on the webpage to verify the mod. Wait a few seconds and the results will be displayed .
How to install batteries in a SMOK X-Priv?
Installing Batteries Correctly: First, remove the back carbon fiber panel from your SMOK X-Priv. Once the panel is removed you’ll see two slots for batteries in the battery compartment. Indicated in the battery compartment is the direction you should insert the batteries. Both batteries should have the negative side up and the positive side down.
How to lock X-Priv?
How To Lock & Unlock The X-Priv Quickly: To lock the X-Priv so that it can’t be accidentally fired or adjusted from the adjustment buttons, press the firing bar and both adjustment buttons at the same time. The device will then lock. Repeat the same process to unlock the device. *HIDDEN ACTION* Pressing the firing bar down 20 times will also lock and unlock the device.
What mode do you use to use a coil?
Also, make sure you are in the correct mode to use the device. If the coil you’re using was designed for wattage mode, you’ll want to make sure you are in wattage (variable wattage) mode. You will then need to adjust the wattage to your preference or the manufacturer’s wattage rating for the coil you’re using.
Can you buy a Smok mod?
Like with any SMOK mod, often times you can buy the mod as a standalone unit or in a starter kit, which will include a tank to complete the experience. With the X-Priv, you can buy the mod itself and receive the SMOK X-Priv Mod, a USB cable, and a very lacking user manual. However, when you buy the SMOK X-Priv Starter Kit, you’ll receive the X-Priv Mod, the TFV12 Prince Tank, a Q4 coil head, a T10 coil head, USB cable, replacements parts and glass, and that same lacking user manual.
Kandypens Prism+ Background
The Contents of Their Kit
- L-R: Dab tool keychain, USB cable, spare resin mouthpiece, dual quartz coils. 1. KandyPens Prism or Prism+ 2. One Dual Quartz Coil atomizer 3. One Ceramic atomizer 4. Spare resin mouthpiece 5. Dab tool keychain & protective pouch 6. Micro USB charging cable 7. Lightning cable port – Prism only
Their Design
- The Prism (left) is slimmer than the Prism+ (right), and has a smaller battery, but is similar in every other way. Both the Prism and the Prism+ are just about four inches tall and very light, making them both highly portable, yes, even the wider Prism+. You just have to be careful about their exposed resin mouthpieces when they’re being transported since they can get dirty if you’r…
Their Performance
- The dual quartz coils (left) heat up faster and produce more intense vapor than the ceramic coil (right), which delivers cooler, smoother vapor. The Prism comes with two coils, each of which offers great, but very different, performance. The dual quartz coils heat up fast and produce big clouds and strong flavor, but might be a little too intense f...