" " When To Change The Heating Element In My Vape Pen

Vape-FAQ.com

when to change the heating element in my vape pen

by Virginie Ondricka Published 3 years ago Updated 2 years ago
image

If your dab pen is still producing vapor, but it tastes nasty, it's likely time to change the heating coils. Over time, the wax residue will build-up on the heating coils, slowly altering the taste of the vapor the wax produces.

Part of a video titled When to change your vape coil - YouTube
1:18
4:26
First pop a few drops onto each liquid port on the side. And one down the middle if this doesn'tMoreFirst pop a few drops onto each liquid port on the side. And one down the middle if this doesn't help then it's time to swap it out the next sign is if your vape coil tastes burnt.

Full Answer

How to replace a vape pen heating chamber?

Unscrew the vape pen heating chamber. The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it.

What temperature should I Set my vape pen to?

Because our versatile vape pens can be used with different materials, it’s important to make sure you’re setting it up for success. Whether you’re using wax concentrates with an atomizer or pre-filled oil cartridges determines what temperatures you should stay within for everyday use. For pre-filled oil cartridges, set your pen to 3.3V.

What to do if your vape pen is not heating up?

Replace the heating element if the pen still doesn’t work. Your first option is taking the pen to a professional vape shop. Sometimes an experienced professional can find a way to repair it. If not, either get a replacement pen or purchase a new heating coil.

How to replace a vape pen coil?

The coil screws into the heating chamber in 2 places. The first screw is at the bottom end of the coil, holding it in place above the battery. The other screw is at the top end, fastening the coil to the wall of the heating chamber. If the screws aren’t in place, your coil likely isn’t either. Take it to a vape pen shop to find replacement screws.

image

How do I know when to change the coil in my vape?

Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.

How long should a vape coil last?

between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.

How do you know when your coil is burnt?

This causes the wick to dry burn, causing an acrid burning taste that spoils the flavourings of your e-juice. HOW DO I KNOW WHEN MY COIL IS BURNT? Due to the acrid, unpleasant taste of a burnt coil, you will be under no doubt that your coil is burnt.

How often should I replace my vape pen?

every 4-12 weeksMost replaceable atomizers or cartridges are designed to be replaced every 4-12 weeks. Frequency of use, temperature used, and quality of the atomizer can all affect how often you will need to replace your atomizer or refillable cartridge.

Why is my coil burnt after 2 days?

That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.

How many puffs Should a coil last?

On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.

Why does my vape crackle?

When inhaling on your device, vape juice is drawn into the coil. It is then the coils job to heat up the e-liquid and turn it into vapour. Like with most liquid when it is heated rapidly it will make a crackling noise as it turns into vapour.

Can I rinse my vape coil with water?

Here is how you should clean your replaceable coils: Let your coil soak in ethanol, vinegar, or cheap vodka for at least a couple of hours. Place it under the tap and rinse. Rinse once more with some distilled water.

Why does my vape still taste burnt after changing the coil?

If you've just changed to a new coil and still getting a burnt taste it could be due to chain vaping, when you take puff after puff with barely any break in between. It is probably the most common cause of coil burning, especially for new vapers.

How often should you vape a day?

There is no one answer to the question of how often you should vape, as it depends on a variety of factors. Some people may find that they enjoy vaping every day, while others may only want to vape occasionally. The most important thing is to figure out what works best for you and stick to it.

How often should you clean your vape coils?

Signs It's Time to Clean the Vape Tank For heavy vapers, it's best to clean your vape tank once a week with a quick rinse. For moderate vapers, clean at least once every two weeks. This is about the same frequency that experts recommend replacing the coil, about every two weeks.

How often should I hit my vape?

Your wicks need to get saturated before you hit another vape. Generally, 15 to 30 seconds are enough before you take another hit, but you can wait longer, especially if you are experiencing dry hits more often.

For pre-filled oil cartridges, set your pen to 3.3V

Prefilled 510 thread cartridges require lower temperatures because the material is thinner and easier to heat. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it’s not giving you enough of a hit. Some oils have a thicker consistency, so just turn the dial incrementally until you get the desired hit.

For dabs (wax), set your pen between 4.0V-4.3V

Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors.

Pro tips for extending battery life

It’s actually a myth that turning your battery on and off between sessions will drain the battery. The opposite is true! Making sure your battery is fully resting during the hours between hits will improve your overall battery life between charges.

Why do vaporizers use metal?

Many of the most expensive vaporizers, such as the PAX, use metal elements because they give you the personalized experience of accurate temperature control.

Why use metal heating element?

Metal, however, is an excellent conductor of electricity and quickly adjusts to changes in heating. Many of the most expensive vaporizers, such as the PAX, use metal elements because they give you the personalized experience of accurate temperature control. There are some claims that metal elements, when heated, can carry dangerous chemicals into the lungs. However, this allegation is unproven and shouldn't cause you to shy away from metal units.

Can you smoke cannabis with ceramic heating elements?

Unlike the metal variety, ceramic heating elements won't alter the taste or quality of your cannabis. This is of utmost importance, especially because you might have chosen to smoke using a vaporizer—rather than a bong or joint—for its significant health benefits. You'll notice this if you're using a device like the Vaporite Portable Oil Vaporizer, which offers an optimal smoking experience for those who love to taste the distinct notes of their favorite strain. Along with a clean smoking experience, ceramic elements can also be heated too higher temperatures than metal or glass, with a melting point of over 3000°F. These characteristics have made ceramics very popular among vaporizer manufacturers.

What temperature does a vaporizer melt?

At the highest temperatures (up to 445°F), a vaporizer will quickly melt trichomes and release a large amount of THC and other molecules. This will deliver a more impactful and intense high and produce a visible vapor.

How does a vaporizer affect your high?

How changing vaporizer temp affects your high. There are a couple of ways changing your vaporizer temperature affects your high. At lower temperatures (290 to 330°F), your vaporizer will just begin to gently melt trichomes and release a vapor that may not be visible to the naked eye.

What is a trichome in a vaporizer?

Trichomes are the resin glands of the cannabis plant. These glands sit on the surface of the plant material and are most concentrated in the female cannabis flower.

What temperature do terpenoids burn off?

In general, here are the boiling points of some of the most common cannabis compounds: THC: 314.6°F (THC-A 220°F) CBD: 320°F (CBD-A 240°F) CBN: 365°F. CBC: 365°F. THCV: 428°F.

What is low temp vaporization?

Low-temp vaporization is known to cause a more mild, relaxed feeling. At this temperature range, the experience will be less sedative and you’ll likely experience more pine and peppery flavors. Both THC and CBD will be expressed at this range, but it’s unlikely that you’ll experience a powerful high.

What temperature is dangerous for cannabis?

Anything above 445°F will risk combustion, which means that you’ll get some smoke from burning plant material. The unique boiling points of different cannabinoids and terpenoids also impact the high. At lower temperatures, some terpenoids and cannabinoids may not be expressed.

Does THC-A boil at a lower temperature?

You might notice that the boiling points for THC-A (raw cannabis) and THC are different. THC-A begins to boil at a lower temperature, but full decarboxylation can occur at a higher temperature. This is one reason why high-temperature vaporizers produce a more potent response.

Vape Hardware Breakdown: What Is The Heating Element?

Because they are becoming so commonplace in the cannabis community, we often forget that vaporizers are complex marvels of technology. Even those well-versed in other aspects of cannabis tech might not necessarily understand the inner workings of vape hardware.

Anatomy Of A Vape Pen

There are four key components to any typical pen vape. They are as follows:

What Is An Atomizer?

Some people may refer to a heating element as an atomizer, especially in the context of nicotine e-juice vapes, though the terms are essentially interchangeable.

Types Of Vape Heating Elements

Vape hardware manufacturers can construct the heating element for their devices from various different types of materials. The most common of these materials are as follows:

Does The Type Of Heating Element Really Matter?

A device’s heating element makes a huge difference in overall quality for extractors and brands who want to produce the best possible product.

How To Change a Heating Coil in A Dab Pen?

Dab pens are easy, hassle-free solutions for those that love dabs but hate having to navigate a traditional dab rig set up. However, using a dab pen is not without its chores, and one of the most important parts of dab pen maintenance is regularly changing the heating coils.

Changing a Heating Coil in a Dab Pen

Most dab pens have three important components you'll need to be familiar with in order to change the heating coils: the mouthpiece, the heating chamber lid, and the heating chamber/heating coils themselves. All of these pieces will be located toward the top of the pen since the bottom is dedicated to housing the battery or storing extra wax.

How Do I Know When to Change Coils?

It may be a pleasant surprise to see that changing heating coils in a dab pen is usually a very easy process. However, it is much more challenging to know when to change coils when compared to how to change them. Fortunately, there are tell-tale signs that you can look for that will be clear indicators that it is time to change the heating chamber:

Where to Buy New Vape Coils?

Most retailers that carry dab pens also have replacement coils. If you have a vape shop or head shop, check and see if they have heating coils for your specific model. Your inventory options will likely be limited. For a full selection of available coils, online retailers are your best option, which includes here at Vape Vet Store.

How to remove a vape pen?

The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.

Why does my vape pen stop working?

Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.

How to fix a broken vape pen?

Before throwing away your broken vape pen, try clearing out any debris inside of it to see if that fixes the problem. Start by unscrewing your vape pen's heating chamber and brushing out any loose material. Once you remove the surface debris, dab isopropyl alcohol onto the coil to remove wax and oil.

How to clean a pen with isopropyl alcohol?

Pick up a bottle of isopropyl alcohol from a general store or drugstore. Moisten a cotton swab, but don’t soak it. You don’t want the isopropyl alcohol to drip into rest of the pen. Using the cotton swab, wipe down the coil and chamber if they appear blackened or covered in debris. Be gentle when handling the coil.

What to do if your pen won't work?

Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.

How to reassemble a pen?

Set each part aside and in order so you know how to reassemble the pen. The bottom section of the pen is the battery. The part above it connects to the heating element, or coil. Notice how the wires run from the battery to the heating element. Again, make sure the pen feels cool before touching it.

Can you use water to clean a pen?

That wire is the most delicate part of the pen and is most often the cause of a nonfunctional pen. Never use water to clean out the heating chamber. It has a lot of wires, so water will short-circuit it. Water can be used to rinse out the mouthpiece.

Why is my vape pen not producing vapor?

The most likely reason for this is that the firing pin doesn’t have proper contact with the battery, which can happen when the cartridge is screwed in too tight.

How many times do you have to press the button to turn on a vape pen?

You usually have to click the button five times to turn on the battery. When taking a hit, ensure you hold the button down, otherwise you won’t be able to draw.

Why does my vape pen taste burnt?

If your vape pen produces an unpleasant burnt taste the reason could be either your vape pen’s temperature control is set too high, or the heating coil has residue on it . If your battery’s temperature is adjustable (a feature found in rechargeable vape pens), you can adjust it to a lower setting using its multi-click functions. Start by rapidly pressing button 5 times to turn it on, then press the button rapidly 3 times to alternate between low, medium and high temperatures. If it’s a problem with dirty heating coil, clean it with a cotton bud.

Why does my vape pen leak?

Leaving your vape pen in the car during hot weather can also cause the cartridge to leak. That’s because the cartridge seals expand and creating a passage for vape juice to leak out. Drawing too frequently on your vape pen, known as chain vaping, can also weaken the cartridge seals, causing vape juice to leak out.

How to remove air bubbles from a cartridge?

One way to remove air bubbles is heating the cartridge with a hair dryer set at a low temperature.

How to clean a clogged mouthpiece?

Dislodging whatever’s clogging the mouthpiece using a small using a safety pin, needle or toothpick. It also helps to regularly clean your cartridge.

Is vaping safe?

Vaping is an easy and safe way to consume your cannabis, that’s why more and more people are turning to this method as opposed to smoking it. However, there’s always that fly in the ointment that keeps you from having a great time when vaping.

image

Why Do Heating Methods Matter?

Metal Heating Elements

  • If you prioritize accurate temperature control, look no further than a metal heating element. With ceramic and glass, it can be difficult to control the elements' temperatures accurately because of the way they conduct heat. Metal, however, is an excellent conductor of electricity and quickly adjusts to changes in heating. Many of the most expensiv...
See more on grasscity.com

Ceramic Heating Elements

  • Unlike the metal variety, ceramic heating elementswon't alter the taste or quality of your cannabis. This is of utmost importance, especially because you might have chosen to smoke using a vaporizer—rather than a bong or joint—for its significant health benefits. You'll notice this if you're using a device like the Vaporite Portable Oil Vaporizer, which offers an optimal smoking experie…
See more on grasscity.com

Glass Heating Elements

  • Glass is the black sheep of the heating element family. Glass elements are more expensive to create than metal and ceramic ones and they don't provide any extra benefits. They're also more fragile than metal, which makes them undesirable for portable vaporizers. Because of this, very few units utilize this type of heating element. Glass is, however, gaining momentum in the conce…
See more on grasscity.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9