what vg pg ratio is best for small vape pens

by Macie Lang Published 3 years ago Updated 2 years ago

We are often asked which VG/PG ratio is the best for our e-liquids! The short answer: We recommend 70VG/30PG for all tanks and 50VG/50PG for pod systems! The long answer: What is PG? PG stands for Propylene Glycol

Propylene glycol

Propylene glycol is an organic compound with the chemical formula CH₃CH(OH)CH₂OH. It is a viscous, colorless liquid which is nearly odorless but possesses a faintly sweet taste. Containing two alcohol groups, it is classed as a diol. It is miscible with a broad range of solvents, includin…

en.wikipedia.org

. It is colorless, odorless and has an extremely low viscosity close to water (very thin).

For discreet vaping without losing flavour or vapour production, it is best to stick to a 50:50 PG:VG ratio. You are basically getting the best of both worlds, without too much of either.

Full Answer

Is VG oil bad for You?

Dec 28, 2020 · 90VG/10PG. This ratio is a step below the MAX VG, which provides you with huge, thick vape clouds, with a less throat hit and a bit more flavor. This is an ideal ratio for those looking for clouds; however, they do not want to forgo the e-liquid rich flavor. Note that at this rate, your throat hit might be subtle.

What is the difference between PG and VG in ejuice?

Nov 27, 2018 · Each has different characteristics, but there is no clear choice for the best PG/VG ratio for flavor. It largely depends on what the user wants from their vaping experience and their personal preferences. Propylene Glycol versus Vegetable Glycerin. When it comes to PG vs VG e-liquid, there are benefits to both.

What are the most commonly modified vaping aspects?

Jul 16, 2021 · Factors to Guide You in Choosing the Best PG/VG Ratio. The best VG/PG ratio depends on the kind of vaping experience you’re looking for. Below are a few factors to consider. Flavour and Throat Hit - For optimum e-liquid flavour while vaping, it is better to go with an even PG: VG e-liquid ratio, i.e. 50:50. You can also go for an e-liquid with a higher concentration of …

Do you prefer higher PG or higher VG content?

Jun 25, 2018 · If you suspect you're allergic to PG, switch to a VG-based vape juice. Vegetable Glycerin. VG-dominant juices are often preferred by those new to vaping. VG-based juice is thicker in consistency. The juice will last longer since you're not burning through it. VG juices work better with certain e-cig mods. For example, sub-ohm mods work better ...

What is the best VG PG ratio for pod systems?

50%VG

If a pod system is used, a 50%VG or lower blend is recommended since these systems have small wicking channels which can have trouble with 70%VG liquids.Jun 8, 2020

Is 70/30 PG VG good?

70% VG/30% PG: (70/30) This is the best level for those who are interested in lots of vapor but still want to notice at least a little throat hit as well. 30/70 produces a smooth feeling that doesn't overpower them when inhaling, and big clouds when exhaling.

What's the difference between 70/30 and 80/20 vape juice?

Like we said, the more vegetable glycerin in an e-liquid, the thicker the clouds will be. This is because VG is thicker, and so the clouds are denser as a result. This means that an 80/20 ratio of VG/PG is going to give you bigger clouds than a 70/30 VG/PG ratio.Oct 4, 2019

Is higher Vg better?

Higher VG liquids work better with lower resistance coils (less than 1ohm), whilst 50/50 e-liquids work well with higher resistance coils (more than 1ohm). High VG e-liquids produce more vapour and have a smoother throat-hit, but the liquid is thick and can clog up coils quickly.Jun 8, 2021

What percentage VG should I get?

For those who are less concerned with the flavour of their e-liquid and enjoy producing massive clouds when vaping, 90% VG/ 10% PG is the perfect ratio. This mixture is ideal for use on high wattage vape devices.Jul 16, 2021

What wattage should I vape 70 30?

E-liquid devices over 1 ohm

E-liquids that produce a more noticeable hit with less of a focus on taste intensity and vapour clouds have a high PG ratio (e.g., a 70/30 PG/VG ratio). The device's product information will recommend a wattage setting. For example, you could find that a 1.6-ohm coil may need 12 watts.Nov 27, 2020

What is the best mix of PG and VG?

50/50

50/50 – this is the most common ratio used, ideal for basic vaping devices like the LiQuid Pro with atomiser resistance levels between 1.0 ohms and 2.0 ohms.May 24, 2016

Is VG thicker than PG?

Both PG and VG are going to become a common part of your vaping vocabulary if you're just starting out. PG stands for propylene glycol, a thin, odorless and flavourless liquid. VG on the other hand is the acronym for vegetable glycerin. VG is slightly thicker in consistency and has a mildly sweet flavour to it.

What wattage should I vape with high VG?

When it comes to your VG/PG ratio, you'll want to ideally look at a 70:30 balance here. You could use a 50:50 juice but because you're likely vaping at a higher wattage (anything over 20 watts), using more PG will give a much harsher throat hit.

Does higher Vg burn coils faster?

The PG:VG ratio of your e-liquid can contribute to your atomizer heads life, especially with low resistance atomizers. Sub-ohm coils heat up much quicker than those with a higher resistance. If your e-liquid has a thinner consistency then the atomizer head can vaporize it too quickly, causing premature burning.

What does 70 PG 30 VG mean?

An e-liquid with a VG:PG of 70:30 will contain 70% vegetable glycerine and 30% propylene glycol.

Whats the difference between PG and VG?

VG has a slightly sweet taste and is considerably thicker than PG. Vegetable Glycerin provides a much smoother throat hit than Propylene Glycol, making it more suitable for sub-ohm vaping. While nicotine and flavorings are commonly suspended in PG, some vendors are offering a VG alternative, to enable 100% VG mixes.Aug 24, 2021

What is VG vape?

VG is a thick and sticky, odorless, and slimy ingredient. As mentioned earlier, consistency is vital, and the vape juice will burn if it gets too watery. VGs high smoke point hinders this from occurring; also, its thicknesses allow the clouds to thicken.

What does a max VG mean?

MAX VG. This means maximum, meaning that the e-liquid holds more VG and almost no PG. As we said, thicker clouds are a result of the higher amount of VG. MAX VG is great for vapers who wish to chase huge, thick clouds over and above. Having a MAX VG, the e-liquid may as well last longer, as it is denser compared to high PG e-liquid.

What does "maximum" mean in e-liquid?

This means maximum, meaning that the e-liquid holds more VG and almost no PG. As we said, thicker clouds are a result of the higher amount of VG.

Is PG a thinner vape?

On the other hand, PG is more liquid and thinner; thus, balancing the VG and inhibiting vape juice from becoming exceedingly thick. PG thinness thins vaporizer clouds. However, it is also said to give a deeper throat hit and concentrate the flavor due to the way it evaporates.

Can you change the ratio of e-liquid?

It turns out that even minor adjustments to the proportion of e-liquid might alter the vaping experience quite dramatically. This is why understanding what the ratios do to vaping experience is so significant. Changing that ratio may result in stronger flavor, bigger clouds, and a powerful throat hit.

Is there a difference between VG and PG in vape juice?

Basically, there is no exact PG vs VG proportion for e-liquids since some vapers like more VG and others like more PG. That is the reason why vape juice is available in a wide variety of proportions. The user can choose the one suiting their requirements and vape appropriately.

Propylene Glycol versus Vegetable Glycerin

When it comes to PG vs VG e-liquid, there are benefits to both. In fact, many quality vape juices mix different ratios of the two in order to create a specific experience for their users. Unfortunately, some people are allergic to one or the other.

What to Choose?

When it comes to determining the best PG/VG vape juice ratio for your personal experience, there are a few important decisions for a vaper to make.

How to Know if Your E-Liquid Has Too Much VG

The atomizer coil in your vaping device has a cotton wick, and the coil assembly has holes that allow e-liquid to travel from the tank’s reservoir to the cotton. The smaller a vape tank is, the smaller the wick holes will be – and a very thick e-liquid may have trouble getting through those holes.

How to Know if Your E-Liquid Has Too Much PG

If you have a vape pen or box mod with a refillable tank, your tank’s atomizer coil assembly likely has fairly large wick holes to accommodate thicker e-liquids because most people these days buy e-liquids with at least 50 percent VG.

E-Liquid Ingredients

E-liquid, alternatively referred to as vape juice, is made up of four key (base) ingredients:

Understanding VG and PG

E-liquids are a mix of two base diluents, VG and PG, that produce vape clouds that imitate smoking. The two base components act as carriers, carrying nicotine and flavourings heated by coils in e-cigarettes, producing an aerosol with predominantly these ingredients.

A Comparison of PG and VG in Vaping

While PG and VG have apparent differences in regards to vaping, there are significant differences between the two primary ingredients of e-liquids, as outlined below.

It Takes Time to Know Your Ideal VG: PG Ratio

Fiddling with the VG: PG ratio may be tedious, but it can pay off handsomely. From the different ratios, the one you choose as your ideal will ultimately determine your vaping experience and make all of that trial-and-error worthwhile.

1. What is PG?

PG, or Propylene Glycol, is an odorless, colourless liquid that is slightly thicker than water. Before the development of vaping, it was used mainly as a food additive and is in the same chemical group as alcohol. The reason it’s used in e-liquid is to provide users with a “throat hit” similar to that of tobacco and carry the flavours effectively.

2. What is VG?

VG, or Vegetable Glycerine is a sugar alcohol made from plant oils. It has quite an interesting history, having been accidentally discovered over 200 years ago when lead monoxide was heated with olive oil.

3. Are PG and VG safe for humans?

Don’t be misled by their complicated names. PG and VG are completely safe for human consumption. These ingredients are “recognised as generally safe” by the FDA.

4. PG vs VG, which one should I use?

Most e-liquids contain both PG and VG, so a more apt question would be: what PG/VG ratio suits my needs? Keep reading to find out the vaping pros and cons of each ingredient.

5. Benefits of PG

For most vapers, especially those of the MTL (mouth-to-lung) variety, propylene glycol is their bread and butter. It has no taste of its own and carries the flavours of vape juice efficiently.

6. Cons of PG

Despite their long-standing popularity, high PG ratio vape juice is not for everyone. Some may find the “throat hit” PG provides to be too harsh and, for some people, it can even be the cause of a sore or burning throat.

7. Benefits of VG

In recent years, Vegetable Glycerine has really come into its own in the vaping world. High VG or 50/50 ratios have become a lot more popular—with good reason! If you’re a bonafide vapour junky, high VG e-liquid is a necessity.

What is PG?

PG stands for Propylene Glycol. It is colorless, odorless and has an extremely low viscosity close to water (very thin). It can usually be found in many household items and food!

What is VG?

VG Stands for Vegetable Glycerin. It is colorless, has a slight sweet taste and has a high viscosity (thick consistency). It can also be found in many household items and food!

Our Recommendation

We firmly believe the best ejuice ratio for everyday use in all tanks/RDAs is 70%VG/30%PG. This provides the best balance between flavour, throat hit and ease of wicking!