First, remove the top of your tank. Then, locate the fill hole and point the nozzle of the bottle towards it. It’s best to tilt the vape tank a little bit so there are no pockets of air forming.
Full Answer
Should vape pen airflow holes be open or closed?
When you're filling a vape pen cartridge, the airflow holes must be completely closed. When the vape pen is being used, the airflow holes should be open enough that you can inhale with ease, without having to pull air in forcefully. The fix: Inhaling too hard can encourage flooding, which can lead to leakage and airflow problems.
How do you fix a clogged vape cartridge?
Filling the cart then over-zealously twisting it closed can block off the airflow holes. “When airflow holes are located in the threading area, you can't screw the cartridge too tight,” said Peki. The fix: Screw your cartridge back onto the vape battery gently.
How to fix a leaking vape pen?
When the vape pen is being used, the airflow holes should be open enough that you can inhale with ease, without having to pull air in forcefully. The fix: Inhaling too hard can encourage flooding, which can lead to leakage and airflow problems. Inhale gently, and let the wicks on the coil do the heavy lifting.
Can you refill your vape pen?
One thing to keep in mind with refilling your vape pen is that you will pretty much do the same thing you did the first time around. However, when reopening the heating chamber and going to refill it, you want to be careful that any residual wax, oil, or dry herb/ash are not going to fall or leak out.
How do I get the air out of my vape?
Open the tank With top fill style tanks, simply the act of starting to remove the filler cap will break the seal, and you will see air bubble up through the tank, releasing the low pressure. With bottom fill tanks, you just invert the tank, start to unscrew the base a couple of turns to allow air in.
What does the air hole do on a vape?
These air holes control the amount of fresh air that can 'get in' to your vape device when you push the fire button. If your airflow is open (or 'wide'), then you'll get a large cloud of cool vapour. An open airflow allows lots of fresh air to dilute your e-juice cloud, so flavours tend to be harder to pick up.
Why does my vape leak when I refill it?
Putting too much e-liquid into your tank or pod can cause it to leak. Too much e-liquid can cause the coil to become flooded or for e-liquid to leak past seals when replacing the cap. Many tanks have recommended fill levels to prevent leakage and other problems caused by overfilling.
How do I Unflood my vape coil?
Turn it upside down and allow it to drain for a while. Remove the coil and tank from your device. Blow through the coil to clear any residual liquid out. Remove the tank, fire up the device and burn off the excess e-liquid.
Should I vape with airflow closed?
With a decreased airflow, you will experience more flavor, more of a harsh throat hit, and less vapor (with a hotter and tighter draw). Overall, if your goal in vaping is a strong flavor, then I'd recommend a tighter airflow. In contrast, if your goal is cloud chasing, then I'd recommend a looser airflow.
Should I close airflow when filling tank?
Your tank has a center tube, make sure keep the e-juice out of it and in the fill holes or you'll end up with a gurgling, popping, spitting mess. This is the airflow channel. You do not want to get any e-liquid in there. To get started, close the airflow holes on your tank completely.
Why is my vape gurgling and spitting?
The characteristic gurgling sounds or e-juice leaking from the airflow holes are both signs that e-liquid has flooded into your atomizer coil without being vaporized. As well as the irritation of gurgling and leaking, this can also lead to spitback, and generally makes your vaping experience pretty unpleasant.
Is it normal to taste vape juice on your lips?
Getting vape juice in your mouth might be unpleasant, but you should not worry too much. The juice may taste bad, but it is mostly made from ingredients that are not harmful, such as propylene glycol and vegetable glycerin, which can also be found in many food products.
Why is my vape popping and spitting?
About 90% of the time the reason your vape is spitting or crackling is because the interior of the coil has become flooded with vape juice.
Why do coils get flooded?
Flooding occurs when a coil is oversaturated with liquid, which can happen if you over-fill your tank, over-prime your coil or inhale too hard on your e-cigarette. Another common cause of flooding is improper vaping technique: using a direct-to-lung inhale on a mouth-to-lung device or vice versa can flood your coil.
Can you overfill vape?
First up you have to ensure that you don't overfill your tank. There should always be a bubble of air at the top, this helps create a vaccum in the tank and can help prevent e-liquid from leaking out of the airflow holes of your tank.
How long does it take for a coil to dry?
To dry your coils, leave them out in the open for about 24 hours. You may find it helpful to put the coils in front of a fan.
Cannabis oil has high viscosity and the concentrate may become stiff. When cannabis oil is cold or settled to one side of the cartridge, it may fail to flow correctly. To fix this, apply heat to the cart. Heating up the cart lowers the viscosity of the cannabis oil, which allows it to flow when you pull
A common solution for freeing up your settled cannabis oil involves using a hairdryer to heat the cart. Separate the cart from the battery and set the cart upright. On its low setting, hold a hairdryer about six inches away from the cart. Apply heat for about 30 seconds. When you see bubbles forming, let the cart sit for a few seconds.
Oil amounts appear low in cartridges
Sometimes when you purchase a vape cartridge, the oil level looks much lower than you thought it would be. If your oil level looks low, it could mean your oil has settled on one side. To resolve this problem, apply heat to the sides of the cart with a hair dryer method mentioned above and check to see if the oil level appears higher than it was.
How to fix thicker vape oil?
The fix: Allow time for the oil to warm up a little before you start pulling vapor.
Why is my vape pen clogged?
A clogged vape pen cartridge. Vape pen cartridges can become clogged when the tiny airflow holes get blocked with oily residue after use, according to Winston Peki, editor of product-review site Herbonaut . “A simple way to fix this is by removing the cartridge from the vape pen, getting a needle, and simply gently poking the needle through ...
Why is my vape pen drawing hard?
Drawing hard when you vape causes the wicks to absorb more concentrate than the coil can vaporize. Excess oil floods the tank and clogs the airflow holes. The fix: Take your vape pen apart carefully and clean the threading on the battery, the tank, the air holes, and the mouthpiece.
Why isn't my vape producing vapor?
“Oftentimes, the reason why your vape cartridge isn't producing vapor can be related to your voltage/wattage/temperature setting, ” explained Peki.
What is a dab pen?
For starters, dab pens are designed to vape thicker concentrates, such as wax or roisin, which tend to have a higher viscosity than the concentrate liquid used in vape pens. However, some vape pens are compatible with both cartridges and wax.
Why are vape pens so popular?
Cannabis vape pens are growing in popularity due to their convenience and perceived safety in comparison to smoking. Nonetheless, more sophisticated inhalation methods can also mean more complex technical problems. If you've ever found yourself pulling hard on your vape pen only to end up with no airflow, you're not alone.
Can you inhale with a vape pen?
When you're filling a vape pen cartridge, the airflow holes must be completely closed. When the vape pen is being used, the airflow holes should be open enough that you can inhale with ease, without having to pull air in forcefully. The fix: Inhaling too hard can encourage flooding, which can lead to leakage and airflow problems.
Why do you need to be stationary when filling a vape pen?
The most important part of filling a vape pen with liquid is going to be to make sure that you are keeping good track of the liquid itself and not letting it spill everywhere. So, you will probably need to remain stationary to avoid dropping oil all over yourself, your vape pen, and the area around you.
Why is a glass globe vape pen more sensitive to damage?
For example, a glass globe vape pen might be more sensitive to damage because of the, well glass globe that can shatter if bumped the wrong way.
How to use a dabber for vaping?
Use a dabber to load the wax coils but NEVER poke the coils directly and try to avoid contact at all costs. Just gently push the ball of wax towards the coil and the heat should do the rest while you are vaping. In addition, you will want to make sure you don’t overpack your wax pen.
What is a vape pen?
First things first, the term ‘vape pen’ is a bit generic. There are all kinds of vape pens. Some vape pens such as a dry herb vaporizer, wax pen, and oil pens (pre-filled and reusable, empty ones) and this will all affect how you fill your vape pen. Not to mention, not all vape pens have the same styles or features, ...
Why do you need to avoid overpacking a heating chamber?
Another thing to keep in mind is that you’re going to want to avoid overpacking the heating chamber because the hot air in the chamber needs space to flow and heat all of the herbs.
Can you overpack a vape pen?
In addition, you will want to make sure you don’t overpack your wax pen. This will cause it to strain and could contribute to the vape pen burning out, and in either case, over-packed coils will overflow when the wax bubbles-up from the heat produced by the coil.
Can you vape with two different oils?
Different oils have different operating temperatures and if you have two oils that work better at different temperature and power settings you might end up making your vape pen experience less than optimal. Not to mention the flavors might not taste good together and you may have wasted the vape oil.
Bottom fill vape tank vs top fill vape tank
Before we start a step-by-step guide, we should mention that there are two types of vape tanks, and their design has a pretty significant influence on the method we will use to refill the e-liquid. Of course, we’re talking about top fill vape tanks and bottom fill vape tanks.
Filling bottom fill vape tank
If your device fills from the bottom, you should check whether you need to completely empty the tank or if it’s possible to add e-liquid while some of it is still in the chamber. Of course, it’s always best to finish your current vape juice and give a tank a quick clean.
Filling top fill vape tank
This type of filling system is unquestionably the most popular one, and it’s no surprise as it’s quick and easy to work. It’s worth mentioning that top fill vape tanks may come in slightly different forms – they can have a screw-off top, twist off, or a sliding lid.
Cleaning the tank
It doesn’t matter if your vape tank is filled from top or bottom – it still needs to be cleaned from time to time. This habit will put a stop to a build-up of e-liquids in the chamber, so be sure to do it regularly. The moment when you’re about to refill your tank is the best one as the device is already empty.
What about a closed pod system?
We should also mention that there are tanks that weren’t even designed to be refilled! We’re talking about closed pod systems. These devices already come filled with vape juices, and when you finish it off, you should simply throw out the used pod and replace it with a new one.