If you have VV and/or VW features, you can adjust for personal taste and for the ohms resistance of the header you’re using. To put it simply, less watts or volts will result in a cooler vape, while more volts and watts will result in a hotter vape. More=hotter, less=colder.
Full Answer
What is the power curve of a typical vape?
For example, you can have your device set at 40W, but with a custom power curve, it might start out at say 50W, then drop down to 45W after a second, to 40W after two, and then for any puff longer than four seconds, drop to 35W.
How do I know if my vape wire is good?
You know there’s a coil inside your tank or atomizer that has a resistance, which—if you use any regulated mod—is shown on the screen generally with a “Ω” sign. When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change.
How does temperature affect vape wire resistance?
When you vape with Kanthal (the most popular vape wire), that resistance value doesn’t change. That’s a particular property of Kanthal: its resistance is static regardless of its temperature. For TC vaping, you’ll use wires that have a known resistance-increase as their temperature rises.
What is it like to vape with a TC coil?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly.
What does VW mode mean on vape?
variable wattageAs you move into more advanced vape devices, you get more options. Back in the beginning of vaping, variable wattage (VW) was the standard vaping mode. It's a fairly simple principle. A lower wattage will give a cooler, less dense vapour and higher wattage will give a warmer more voluminous cloud.
What is VW mode?
VW Mode (Variable Wattage) Variable wattage mode is also referred to as watt mode or power mode, and allows you to choose the output power of your mod in watts. This is the standard mode for most kits, and it lets you tweak your wattage level gradually to find your perfect vape.
What is VV mode in vaping?
Variable Voltage Mode, or VV mode, is a setting on your vape device that lets you define the precise voltage (Volts) running through your device. VV devices don't require a very advanced vape chip, so they tend to be slightly cheaper than VW devices.
Is higher voltage better for vape?
Best Vape Pen Voltage Setting In general, the ideal voltage setting for more THC carts is 2.5V - 3.3V. More specifically, a voltage right around 3.0 V should yield a balance of taste and potency from your draw. The reason for this is that at this medium level of temperature, you get the best flavor from your THC carts.
What are the best vape settings?
Low-temperature vaping is the top recommendation for vape pens. It has a better flavor and it's safer, having less impact on your lungs. Low-temp vaping is usually set at 374℉. This setting produces a thinner vapor than higher temperatures.
Is temperature control vaping better?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What is VV voltage?
Variable Voltage Explained (VV): Voltage is simply the power that is applied from your battery to your atomizer/tank/clearomizer. It applies the same amount of power regardless of whether your coil is new, or 1 month old, and regardless of whether your coil is 1.2ohm or 2.1ohm.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What is SP mode Vaporesso?
Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2).
Which coil is best for vape?
Coils with at least 1.0 ohm resistance are designed for 'mouth-to-lung' vaping. They produce a subtle, cool vapour with intense flavour. Often, these coils are best suited to beginners as they are designed for a vaping style that's most similar to how smoke is inhaled from a cigarette.
What coil should I use for my vape?
The standard or regular level of ohm when it comes to vaping and your clearomizer is between 2.4 and 2.8. This is by far the most common ohm range chosen by those looking for replacement coils, with the most commonly chosen being 2.5. This standard level tends to offer the most consistent level for your vape.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What is VW mode?
VW Mode (Variable Wattage) Variable wattage mode is also referred to as watt mode or power mode, and allows you to choose the output power of your mod in watts.
What is TC mode on a vape?
Whether you prefer a cooler vape or a slightly warmer one, TC mode helps you keep the same quality of puff every time you inhale. Certain wire types can only be used in temp control mode, such as nickel and titanium, though some stainless steel coils can be used too.
What is the difference between a VV and a VW?
Size: Since these mods need space for their circuitry and wiring to perform comparably or out perform mechanical devices VV/VW mods are often larger than fixed voltage regulated mods or mechanical mods and the smaller VV/VW mods often will have a shorter battery life, lower output maximum output power, and smaller usable resistance range.
What is a VW mod?
A VV/VW mod has the ability to customize the output which can be helpful in a variety of ways, it allows the flexibility to quickly change and use a wide variety of atomizers with different resistance, coil types and wire sizes. The ability to adjust the output power also allows users to control the amount of heat generated by their coils which can change the flavor of or burn certain e-juices and help adjust if the user wants to take shorter or longer pulls to create the same amount of vapor. With these devices a few button clicks is all it takes to readjust and you are ready to go
What is TC vaping?
Temperature control (TC) vaping is really “temperature limiting,” in that you effectively set a maximum temperature you want your coil to reach and your device ensures it stays within this limit. This means that mods can avoid “dry hits,” and even if you fire your device with almost nothing in the tank it won’t “overcook” your juice or burn the coil’s cotton. In normal use it gives you more consistent performance because it levels out the usual spikes and drops in temperature.
What is bypass mode in vape?
Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of a variable wattage mod. You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you’re using. This means that your effective wattage will be higher when the battery or batteries are fully charged and lower as you continue vaping throughout the day.
What is super player mode on Vaporesso?
Super Player mode (available with the Swag II) is another Vaporesso speciality, which essentially allows you to use coils with a wider range of resistances than the device usually supports, down to 0.03Ω (and up to 5Ω) for the Omni Board 4.0 (and up to the more recent V 4.2). This is a really great feature if you build your own coils, because while you’re unlikely to find a pre-made coil with such a low resistance, you may build one of your own that you struggle to use with the hard-coded restrictions on regulated devices.
Can you use Kanthal for TC vaping?
Kanthal, for example, barely changes resistance as it gets hotter (and so you can’t use it for TC vaping), but other materials like nickel have a more noticeable response and are much more suitable for TC vaping. The TCR values tell you the strength of this response.
Is vaping mode complicated?
Advanced vape modes (usually) aren’t so complicated. The good news is that for all the fancy names companies give to these modes, most of the time they’re quite straightforward in terms of what they do and how they work.
Why is my vape consistent?
Vape consistency: By having control over the temperature your coils can rise to, the vape will be consistent from puff to puff, and even within one puff. In regular wattage mode, the hits are more inconsistent because the heat of the coil changes based on the length of the hit.
What is the best wire for vaping?
TC vaping generally uses one of these four types of vape wires: 1 Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode. 2 Nickel 200: commonly known as ni200, it was the first temperature control coil but it’s less common now due to some vapers having sensitivities to nickel. 3 Titanium Grade 1: otherwise known as Ti. It works well in TC but the user has to make sure it does not get overheated. 4 Nickel ferrous: also known as NiFe, comes in various grades such as 48, 30, 52, 70 and can be used in either mode, but is not widely available.
What is temperature control vaping?
Temperature control vaping can be an amazing experience. It provides the security of consistency that wattage vaping often lacks. No one likes dry or burnt hits, or vapes that get too hot with long hits. TC vaping solves that.
What type of wire do you use for vaping?
Next, you must vape with the right wire type. TC vaping generally uses one of these four types of vape wires: Stainless steel: this wire is very popular and readily available. It comes in various grades such as 304, 316, 316L, 317, and 430 but the most common is SS316L. SS can be used in wattage or temperature control mode.
Can you adjust wattage on a vape mod?
Prior to TC, most top vape mods could only adjust watts (another innovation from Evolv a few years prior.) Now in 2020, like wattage control, temperature control is a feature found in most vape mods.
Can you take long hits with a TC vape?
Hopefully, you’ll get a good vape and, because it’s TC, you should be able to take really long hits without fear of overheating the coil and wick. It should be just like normal—except when you run out of juice you’ll notice the vapor dropping off significantly. Adjust the temperature up or down if necessary.
Do vape mods have TC?
First and foremost, a vape mod that supports TC. Most mods on the market come with a TC mode, although it is often left out from otherwise fully capable pod mods. If unsure, check the specs before buying a mod—or use the search function on this website. If a vape mod does TC, we will test it!
