what do watts and volts matter vape reddit

by Mrs. Alta Hermann Published 3 years ago Updated 2 years ago

What is the difference between voltage and Watt?

Voltage is the amount of electrical current running through the -omizer. Wattage is the by product of running X amount of Voltage through Y amount of Resistance. So by the chart if you like vaping at say 6 watts then you can. Run 4.2 volts through a 2.8 ohm -omizer and get 6.3 watts. Run 3.0 volts through a 1.5 ohm -omizer and get 6.0 watts

What is a good resistance for vaping?

Volts come from the battery. Ohms is resistance, which depends on the coil in the e-cig. Amps is how much current is going through the setup. The battery has a max which you should not exceed. It's a combination of Volts and Ohms. Watts is the power. More power, more vapor. It's a combination of Volts, and Amps. V=Volts R=Resistance=Ohms I=Amps W=Watts

What is a variable wattage device?

Main builds are between 0.3 and 0.7, between 40 and 60 watts 99% of the time. 0.25 ohms at 80W on one mod, ~1.13 ohms at 20W on the other (because all I have left is 12mg juice sob sob) This is a good question. I have a kander subox mini and use the .5 coil and vape at 20-25.

How does the resistance of a vape coil affect flavour and throat hit?

I vape at 120 watts constantly because I can regulate voltage on my box mod rather than wattage. Thats not to say that turning the voltage down obviously turns the wattage down. Anyway, my mod goes up to 6 volts which is what I vape at. I also can only build to 0.30 ohms or above, otherwise I'd fry the chip.

What voltage and wattage should I vape at?

The most common range for a variable voltage vape pen is between 3.3 volts and 4.8 volts.Jan 20, 2021

Is it better to vape higher or lower wattage?

Basically, a higher wattage is needed to produce the right amount of vapor. -Pod systems are less about lots of vapor, and more about a satisfying nicotine hit – that's why they're made for mouth-to-lung vaping, which introduces a smaller amount of vapor into the mouth before it's inhaled.Oct 1, 2021

Does voltage matter for vaping?

USING YOUR VAPE

Voltage is one of the factors that effects the amount of vapour you get. The greater the voltage, the higher the temperature, meaning more vapour. Original, Logic CURV, Logic PRO and Logic Compact all have fixed power settings - 3.7 Ohm.

Does higher voltage mean more vape?

Higher Wattage, More Nicotine per Puff

A regulated mod set a higher wattage will tune-up the temperature hence more nicotine-containing liquid vaporized. The bigger the puff produced only means there will be more nicotine per puff.Oct 8, 2020

What does 2% mean on a vape?

The amount of nicotine in a vape depends on what nicotine strength you choose. E-liquid strength ranges from zero nicotine, up to 20mg/ml, or 2%. This means there are 20 milligrams of nicotine present in each millilitre of e-liquid.Sep 16, 2021

What wattage should I vape at 0.17 ohm?

40-80 watts

Each coil is an RGC Conical Mesh coil and has a resistance of 0.17ohms. The best recommended wattage of 40-80 watts. These coils are available as single coils or in packs of 5 x spare coils.

What wattage should I vape at 0.13 ohm?

These coils are suitable for use between 50 -100 watts, but offer optimum performance at 70 - 80 watts. The N1 coils are rated at 0.13ohms for sumptuous and sensationally-flavourful sub ohm vaping and are designed for use with the VooPoo Uforce and Uforce 2 tank models.

What watts should I vape at .15 ohms?

For the 0.15 ohm GT4 coils, used on Vaporesso's NRG tank, for example, the recommended wattage is 45 and 65W. 45 to 65W is still a fairly broad range, so it will be up to you to find what works best within these limits.Oct 25, 2018

What wattage should I vape at 0.15 ohm?

60-90 watts

In contrast, the 0.15ohm dual mesh coils have a best recommended wattage of 60-90 watts. Both atomisers offer huge clouds and flavour production. Since these coils are sub ohm / direct to lung (DTL) in vaping style, they are recommended for use with higher VG e liquids.

What is mouth-to-lung vaping?

What is mouth-to-lung (MTL) Mouth-to-lung is a style of vaping that is most similar to smoking. When you draw, you first pull the vapour into your mouth before then inhaling it into the lungs. This draw is more gentle than drawing on a cigarette, as the harder you draw the less vapour you get.Jun 26, 2019

What wattage should I vape at 0.3 ohm?

between 50 and 100 watts

The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.

What wattage should I vape at 0.8 ohm?

20 W - 35 W

A typical wattage range for 0.8-ohm devices is 20 W - 35 W (or sometimes 40 watts - 50 watts). However, always check the product information on your vape device for best results.Nov 27, 2020

What is variable wattage?

A variable wattage device is different. Rather than telling the device how much power you want to flow through your atomiser, you tell it how much power (wattage) you want it to output.

How to get the perfect vape experience?

After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.

How to get a vapour hit?

At its simplest level, it’s simply a matter of adjusting the voltage or wattage of the battery until you get the vapour, flavour and throat hit you desire. You can also experiment with using different resistance coils and combining them with different voltages/wattages.

What coils are used for vaping?

Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping. Originally, sub-ohm vaping was reserved for experienced vapers who want to push the boundaries with rebuildable coils.

Why do vapes burn out faster?

You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.

What affects vapour and throat hit?

The resistance of your coil is not the only thing that affects vapour, flavour and throat hit. It also depends on the amount of power flowing through your coil. There are two common types of vape batteries which allow different amounts of power to flow through your coil. These are variable voltage and variable wattage.

What is the difference between variable voltage and variable wattage?

The difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With a variable voltage device, you manually control the amount of power (voltage) going through your device.

Vape-FAQ.com