what do i do if my vape says no atomizer

How to fix check atomizer/No atomizer with a vape tank?

May 25, 2021 · This could be the reason why you are now getting a “No Atomizer” or “Check Atomizer” message in your vape. Thankfully the solution to this is simple. Remove the tank from the mod and check the threading where it connects to the mod. Do the same with the 510 connector. Clean the contacts and thread with a paper towel if there is gunk and debris.

What to do if your atomizer is not firing?

Jun 22, 2020 · If your pod vape isn’t firing, has a blinking LED and won’t fire, or says Check Atomizer or No Atomizer, you can follow a few of the same steps listed above for tanks: 1. Clean Your Contact Points The first step you should try if your pod vape isn’t firing or says check atomizer is cleaning out your contact points.

How to fix a vape that won’t start?

Check Your Vape’s Atomizer Connection Points. If your vape device isn’t recognizing your atomizer, it could be an issue as simple as an interrupted connection. Dust and debris can get in the way of the electrical current, leading to a complete mechanical failure.

How to clean a vaporizer properly?

Dec 28, 2021 · This may be a connection issue where the 510 connector on top of the battery/mod isn't making proper contact with the tank, coil, or pod, in which case it would say 'no atomizer.' If it says 'check atomizer,' it means the battery/mod can't read the coil, i.e. it can't fathom the resistance, or it detects a problem. Here are some suggestions for resolving this …

What does it mean when your Smok vape says no atomizer?

How do I fix my atomizer short?

Can you fix atomizer?

Where is the atomizer on a vape?

What's atomizer on vape?

How do I reset my Smok vape?

How do I change the atomizer on my vape?

Where is the 510 pin on a vape?

Is an atomizer a coil?

Do you need an atomizer to vape?

What causes a check atomizer short?

Loose pieces of metal on the build deck will cause your mod to display “Check Atomizer” or “Atomizer Short”. Even very small pieces or trimmings of wire can cause a short or a check atomizer error on an RDA/RTA/RDTA. First, inspect the build deck closely for loose pieces of wire or other foreign objects.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

How to avoid vaping issues?

Many vape issues can be avoided by simply performing regular cleanings and maintenance on your device. Taking proper care of your vape can help you minimize issues, and keep your vaporizer running in tip-top shape. Cleaning your vape isn’t difficult, and takes just a few moments of your day.

How long does it take to read a vaporizer?

Reading Time: 4 minutes . Your vaporizer is a lot like your car: you count on it on a daily basis, it’s a critical part of your everyday routine, and you hope to avoid issues at all costs. However, just like a vehicle, vaporizers do run into mechanical problems every now and then.

What is a vaporizer?

A vaporizer is an electronic device, containing a battery that creates a very real electrical current. Above all, your safety should be your top priority. It’s easy enough to get a new atomizer or vape if yours has turned into a dud, but recovering from an injury that resulted from an overconfident, uninformed repair attempt is a much larger order.

Try another vape tank or vape mod

So, you have the ‘check atomizer’ message, but we first need to find out if the problem lies within the tank or the mod. If you have them available, we need to try another tank and mod. This is the quickest method to determine where the problem lies.

Check your vape coil

Let us start simple. The number one cause of a ‘check atomizer’ message is your coil.

510 connections on your e-cig

There two points within your e-cig that have to meet properly and make a connection. This allows power to pass between your e-cig mod and tank.

Clean the 510 connection on your vape mod

If you have done the first test and another tank on your vape mod is showing the same message, this would indicate that the problem is your e-cig battery or mod. The chances are this is an easy fix.

Clean the 510 connection on your vape tank

So, we have cleaned the connection on your vape mod, now we need to look at the bottom of your vape tank.

Check the 510 connection on your tank

Even though you have cleaned the 510 connection on your tank, there is a chance that it might need a little bit more love.

Check the 510 connection on your vape mod

Just like the 510 connection on your tank, the one on your mod can also suffer if your tank has been screwed on too tight.

How to fix a mod that won't turn on?

Just to recap if you're still seeing the error message, here's a brief summary of tasks depending on your device: 1 Clean all contacts on battery/mod, tank or pod 2 Remove and reinstall the coil (after cleaning) 3 Try a new coil 4 Check the 510 pin and see if you can adjust it (mods/tanks) 5 Try another tank on your mod 6 Try another mod with your tank 7 Adjust base of coil carefully if you can (mainly sub-Ohm coils)

Can you use a sub ohm battery on a mod?

Standard batteries probably won't fire below 1.0 Ohm and putting a tank with a sub-Ohm coil on a standard battery is a no no. If the new tank works fine on your mod you know the issue is with your existing tank or the coil. If your mod is still reading 'check atomizer' or 'no atomizer' with the new tank, it’s likely to be a problem with the mod.

1. Bad coil connection

If you are using a sub-ohm tank, then it is possible that your coil was inserted incorrectly, or it was just not tight enough. So simply re-insert it. Sometimes it’s just as simple as that!

2. You are creating a short

If you are using a rebuildable tank, make sure your build is not touching the cap or any other metal piece of the deck. Also make sure your coil is in good shape and there are no breaks.

3. You have a faulty tank or coil

Sometimes there is nothing wrong with your mod and the issue well might be in your tank. So try to screw a different atomizer in. If your mod is now able to fire the new atomizer, then you know who to blame! For sub-ohm tanks with pre-made coils, sometimes, you just get a bad coil. Try using a different one from the pack.

4. There is no connection

Clean the 510 thread of your mod and the 510 pin of your mod. Maybe there is just something stuck in between. If this does not work, maybe the lack of connection is related to your coil.

What is the guide to vaping?

Guide To Vaping is the largest online magazine blog that is dedicated to providing a vast selection of helpful and informative articles about the latest vaping news, vapor products, and CBD.

What is a built in microchip?

There is a built-in microchip that has been programmed to detect when your coil or pod is attached to the device. If your pod and coil are attached to the device and there is a connection issue, this warning will display. When this happens you will not be able to use the device.

No Atomizer

Hi there... I'm new to Yocan UNI Pro mods and have no idea why I am consistently getting a No Atomizer warning ( there is one in there). My Uni Pro is only a week old, fully charged, and I'm using the magnet adapter that came with the device. Sometimes it works, most of the time it doesn't.

Re: No Atomizer

Hi @LaurenMaurer#N#Thanks for your thread.#N#Please try to reload the oil cartridge, or clean the connection points of magnetic adapter.#N#By the way, you also can refer to this page to fix this issue: https://www.yocantech.com/help-center#UNI#N#Any further questions, please let me know.