Change VPC Parameters: 1) Press the Fire button 3 times in quick succession to enter the setting mode. 2) Press the Fire button to toggle the cursor and select the TCR. 3) Press the “+” or “- button to adjust the TCR parameters, long press the button to enter the quick adjustment mode. 12. Change VPC Parameters:
Full Answer
How do I set up my vape mod?
Once inside Settings, you can move through the menus using the UP and DOWN keys on the mod. The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
Do any of the Geek vape mods have VPC?
And all three mods has VPC. I wouldn't doubt that some other Geek Vape mods has it too. And I think why you don't hear much about VPC is because only a very small percentage ever use it. I know I don't have much use for it at all. As I normally use TC whenever possible. I've seen the non kit available on eightvape.
How do you set the VPC on a fire mod?
Set VPC-1 to your initial wattage, let’s say 40W. Enter this level and go to the next VPC setting. This basically means that when you press your fire button, the mod will fire at 40W for 1 second. Now set VPC-2 to 30W and press enter to go to the next level, VPC-3.
What are the different vaping modes and settings?
The first setting you will encounter is the MODE SETTING. In MODE SETTING, you can set up different vaping modes for different types of coil – W, Ti, Ni, SS, M – as well as adjust pre-heat, if you’d like to have this feature up and running.
What is the VPC setting on my vape?
Variable Power Curve (VPC) is an advanced function or mode option on some mods. This mode enables the user to customize different power levels (wattage) in set increments, providing a power curve over a puff duration (time). VPC was first introduced about 3 years ago and was only found on a handful of high-end mods.
How do I change the settings on my vape mod?
How Do I Change Modes? Most mods will allow you to change between modes by pressing the fire button three times rapidly, and then either scrolling through using three more clicks of the fire button, or using the + and – buttons.
What setting should I set my vape to?
As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.
How do you use curve mode on vape?
0:273:43Power Curve Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clip3 times to put it in menu mode there's the menu mode you can tell because that turned orange clickMore3 times to put it in menu mode there's the menu mode you can tell because that turned orange click it again and it jumps down in the menu. Screen. Click one of these buttons over here and it's jump.
What temp and wattage should I vape at?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What temp should my vape mod be at?
390 F to 420 F390 F to 420 F is considered the best temperature range to vape e-juice at. This is because you will be provided with a substantial, but refreshing hit that is smooth to the lungs.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What wattage should I vape at 0.6 ohm?
12-25 wattsIn contrast, the 0.6ohm coils have a recommended wattage of 12-25 watts. They are therefore classed as restricted direct to lung (RDL) coils, offering less clouds but conserving your battery and e juice.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What is TC TCR mode?
The Temperature Coefficient of Resistance (TCR) A temperature coefficient expresses the gradual change in the physical properties of the wire as the temperature changes (a property required for TC vaping as discussed earlier).
What is TC mode vape?
Temperature control (TC) is one of the most common features that you'll see when you shop for advanced vaping devices online. In fact, you might even say that it's just about the most common box mod feature that almost no one ever talks about.
What is pulse mode in a Mod?
Pulse mode Essentially, the mode switches the relatively consistent output of most devices by a regular pulsing of output, which occurs every 0.2 seconds as long as you hold down the fire button.
How to Use Smok Mods: How to Turn It on
Almost all of SMOK’s recent run of mods utilise a fire bar over a single fire button.This is a great method for firing your mod, as it requires ver...
How to Use Smok Mods: Exploring The Display
SMOK packs a lot of information into its mods’ displays.You have wattage and TC readings, dual-battery readouts, Ohms reading, voltage, and even a...
How to Use Smok Mods: How to Access Settings
If you’re using a touchscreen SMOK mod, there will be a settings icon on the homescreen which you can simply tap to access the mod’s settings.If yo...
How to Use Smok Mods: Moving Around Inside The Menus
When you enter the settings menu (THREE CLICKS on the fire bar), you can quickly skip through the settings menus by clicking the fire bar.SMOK mods...
How to Use Smok Mods: Installing A New Coil
When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is an NEW or OLD coil and give you two po...
How to Use Smok Mods: Quick Settings to Remember
1. Quickly Switch Between SOFT, NORMAL, HARD, MAX: on a non-touchscreen SMOK mod, simply press the fire bar and the up button at the same time. Fro...
How to Use Smok Mods: How to Upgrade Smok Mod’S Firmware
First and foremost, make sure you have SMOK’s NuMicro ISP Programming Tool installed on your PC.Once this is installed, you need to follow the step...
Have You Seen Our Best Sub Ohm Tanks of 2018 List?
No? Where you been!?We recently published our guide to the best sub ohm tanks for 2018.We tested A LOT of tanks. Too many to remember.But these are...
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
What is bypass mode?
Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
Janusz Super Member ECF Veteran
Most people use regular power mode or TC mode and I am just curious how many people tried to use VPC mode on Aegis. I tried it today and I like it very much. Am I alone? There is very little info about this mode and I am not sure if any other vaping device offer this mode.
bombastinator ECF Guru Verified Member ECF Veteran
For those curious VPC is the manual curve mode. Sort of like a hand made replay. I’ve got an ageis, but messing with the curve function simply seemed too complicated to me. Some people really like the curve function though. It’s just a bit of a pain getting the curve where you want it.
Janusz Super Member ECF Veteran
For those curious VPC is the manual curve mode. Sort of like a hand made replay. I’ve got an ageis, but messing with the curve function simply seemed too complicated to me. Some people really like the curve function though. It’s just a bit of a pain getting the curve where you want it.
Tonee N Vaping Master Verified Member ECF Veteran
I use VPC all the time with the Smok Prince coils (Q4 and 6). Love it.
stols001 Moved On ECF Veteran
I don't have that mod, but I have other mods with power curves. I have used them on occasion, usually to give myself something of a "primer heat up" puff or two, and etc. They can be handy, and I definitely notice a difference, even on some non- DNA mods I use like the steampunk.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
Do coils cool when vaping?
Smaller coils, with a high resistance and straightforward, un-fancy wires, may have a tendency to actually cool while you’re vaping them, as a result of the constant influx of cooler juice and air…especial ly if you’re an aggressive drawer (okay, that sounded weird, vision of aggressive desk drawer, aggressive sock drawer, damn, you know what I mean!).
Do you need to fit a wick before a mod?
Before you’ve fitted a wick or juiced your RDA, fit it to the mod so you can observe the coils when you fire them. This is something that you should do after a build, regardless of whether you are setting a power curve.
Do power curves work on vapes?
So you see, power curves or wattage curves are not just a gimmicky feature. They genuinely can improve the quality of your vape, your ability to extend your hits and maximize flavour and cloud formation. Not only that, using the RAMP increase or preheat curve type will extend the life of your coils.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
Can you control the temperature of a box mod?
But Temperature Control vaping is a very useful feature of a box mod, as it allows you to control the maximum temperature that the atomizer will fire at. You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.
Do vape mods have a user interface?
Most modern vape mods run on a vape chip and software, just like a smartphone. Vape mods also have a user interface, buttons, and a display . In fact, they’re probably closer to a mobile phone than a cigarette in this respect. Please though, DO NOT be put off by ALL the settings and bells and whistles inside your box mod.
