How to use the Pax 3 - Initial Setup
- Turn it on. After it’s fully charged, you’re ready to turn the vape on! Simply press the button in the middle of the...
- Changing the Temperature. The Pax 3 has four initial temperature settings with setting one being the lowest and four...
- The Burnoff. Before going ahead and using your Pax 3 for the first time, we would suggest having...
How do you use the Pax 3 vaporizer?
Included in the box are:
- PAX 3
- One magnetic charging cradle with USB cord that plugs into your computer
- Two interchangeable mouthpieces: one flat, already fitted with the device, and one raised
- Two interchangeable oven lids: one standard already fitted on the device, and one half pack oven lid, for a smaller oven load
What is temperature setting on Pax 3?
- Low: The device will warm to 520°F. This setting is represented by a single lit “petal” on the device’s LED indicator.
- Medium low: The device will warm to 610°F. This setting is represented by two lit petals on the device’s LED indicator.
- Medium high: The device will warm to 700°F. ...
- High: The device will warm to 790°F. ...
Does the Pax 3 have a party mode?
The Pax 3 (Review | Buy) is great for parties, game nights, watch parties, and any other occasions when you have a bunch of people hanging out together.It can fit up to 0.3g in the oven so it’s pretty large. However, it’s likely that you’ll be using it by yourself most of the time, in which case you likely won’t be using as much herb as you would in a group setting. and for those ...
How do I Clean my Pax 3 vaporizer?
- A glass of fresh water
- Cotton swabs
- Isopropyl alcohol and/or alcohol wipes
- A wire brush, included with PAX 3
- Pipe cleaners, included with PAX 3
- Paper towels, in case of any excess dirt
How do you hit the PAX 3?
Depending on the amount of flower packed inside of the chamber, place the standard or half-pack lid over the oven. Quickly press down on the center of the mouthpiece to activate the device. It will vibrate when to show that it's powered on.
What temperature should I vape PAX 3?
Keep these factors in mind while finding your PAX 3 sweet spot: Flavor: Do you want to taste the finer notes of the cannabis material being vaporized? Consider keeping the temperature in the 360°F range.
How long does it take PAX 3 to heat up?
PAX 3 heats in as little as 15 seconds. PAX 3's use of lip and motion sensing automatically cool and boost oven temperatures offering significant performance over other conduction vaporizers that only hold the heater at one consistent temperature.
How do you know when PAX 3 is done?
If the herb is stiff, brittle, and it crumbles easily-, it's done. You can take a quick look at your herb chamber while vaping, or examine the texture of your herb after your session, and make improvements during your next sessions. With the Pax 3 (Review | Buy) You can open the oven lid and look at your herb.
How many hits do you get from PAX 3?
The Pax 3 has a small oven lid that users can adjust to decrease the oven size to get more hits from a smaller amount of material. Without this lid in place, users can get anywhere from ten to twenty hits from a fully loaded chamber on the Pax 3.
How do I make my PAX 3 hotter?
To place PAX 3 into temp set mode, press and hold the power button for approximately two seconds. Once in temp set mode, you can cycle through the four aforementioned preset temperature options. Quick-press the power button to cycle through the four presets.
How much wax do I put in my PAX?
Keep it lightly loaded. Finally, the concentrate insert in the PAX 3 isn't very large, and unlike herbal mixes, which should be firmly packed, air is your friend with stickier substances. A tiny amount of concentrate, about the size of a small pea, will ensure proper airflow and plenty of room to produce great vapor.
What does the blue light mean on the PAX 3?
StandbyLED Indicator Guide Standby - A blue LED indicates standby when Pax is motionless for 30 seconds. Battery Levels - Shake Pax to check your battery level: red blinks = less than 10%, yellow blinks = less than 80%, green blinks = 80% - 100%
What temperature should I set my PAX?
Low (520° F / 270° C) Medium Low (610° F / 320° C) Medium-High (700° F / 370° C)...Simply give your PAX vape a shake, and the light petals will illuminate to show you how much battery you have left:One petal = 0 – 25% battery life left.Two petals = 25 – 50%Three petals = 50 – 75%Four petals = 75 – 100%
Do PAX get you high?
The size of a single fat blunt, the Era can get you high for a month, requiring just a couple of charges along the way. It's the iPod of vaping, but 1,000 hits in your pocket is not always a good thing. Pax had built a completely polished, mindless device to get high. Now, it needed to create a limiter.
How tight should I pack my PAX 3?
A tight pack will help the heat spread throughout the bowl of your PAX 3. You can use the lid, or the PAX multi-tool, to firmly tamp down the oven's contents. Smaller loads still need to be tightly packed for best performance, so use the the half-pack oven lid if you're using less material.
How do you get big clouds on PAX 3?
By starting at the lowest setting, you'll get all the flavor that you may miss out at with the higher temperatures. Then, as you increase the heat, you'll finish off with larger clouds, essentially hitting the entire heat spectrum during your session.
What temperature should I set my PAX at?
PAX 2 and PAX 3 Light GuideTemperature Setting 1 360ºF (182ºC)Temperature Setting 2 380°F (193°C)Temperature Setting 3 400°F (204°C)Temperature Setting 4 420ºF (216ºC)2 more rows•Mar 9, 2022
What is the best temperature setting for PAX era?
The Sweet Spot Willamette Valley Alchemy, who produces some of the best pods available in Oregon, recommends setting your device at a temperature between 480-500 degrees. At this temperature, you can expect a super flavorful hit with a medium amount of vapor.
How hot should my PAX be?
There is no right or wrong temperature at which to use your PAX Era. Any setting in the available temperature setting will get the job done. However, different temperatures produce new experiences, so it's wise to try a variety of settings to find your favorite.
How to charge a PAX 3?
Make sure to fully charge your PAX 3 vaporizer before your first use. Plug the cradle into a USB power source, then set the PAX 3 on top of it with the lights up . If it’s facing the right direction, the magnets will cause it to slide into place over the charging contacts. The number of petals currently illuminated will show you ...
How long does it take for a PAX 3 to go into idle mode?
Turn the PAX 3 on with nothing in the oven, and turn it up to the highest temperature setting. Since the PAX goes into an idle state after inactivity, just sit with it for a few minutes, occasionally picking it up and moving it around. After three to five minutes, any odd smells should have dissipated.
How long does it take for a PAX 3 to cool off?
If you set the PAX 3 down for around 30 seconds, the oven will start to cool off. This makes more efficient use of the battery, and keeps your herbs from cooking when you aren’t actively hitting it. When the petals turn blue, the vape is in standby mode. Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. After three minutes of inactivity, the PAX 3 will shut off on its own.
What is the best grinder for a PAX 3?
The PAX 3 works best with very finely ground herb. A two-piece grinder works best, but you can also turn over your favorite four-tier so that the herb stays between the teeth longer.
What happens when you touch a PAX 3?
When the petals turn blue, the vape is in standby mode. Picking it up, or touching the mouthpiece with your lip or finger, will cause it to heat back up quickly. After three minutes of inactivity, the PAX 3 will shut off on its own.
How to change temperature on a vape?
To change the temperature, hold down the mouthpiece button for a few seconds , until the petals on the front flash. The petals will then illuminate to show your current temperature setting. Press the mouthpiece button to cycle through temperatures, then hold the button or shake the vape to set it.
How long does it take to charge a PAX 3?
It will take around three hours to charge the first time, but subsequent charges will be slightly faster. When the PAX 3 is on, shake it a few times to show the current battery level.
How does a Pax 3 work?
The Pax 3 usually works best when the oven is packed tightly and when the herb is finely ground , as we discussed above. To achieve this it's best to use a grinder that has very strong teeth - that way you can finely grind the herb to the perfect consistency before packing it into your device.
How to keep a Pax 3 working?
One of the most, if not the most essential part of keeping your Pax 3 functioning well is always cleaning out your oven. If you do not clean out your oven post-session, you will find that your Pax 3 isn't going to perform as well as you know it should because it’s clogged and sticky. All that junk is basically barricading the oven’s heat so it doesn’t get through your oven chamber correctly. You're not going to get as much heat or as much airflow as you are supposed to, and quite frankly, you're not going to be satisfied with the performance of your Pax 3.
How to get rid of vape smell in oven?
Simply turn the vape on and choose the highest temperature setting (setting 4) without any material packed into the oven. Let the oven heat entirely and then let it burn for about 5 minutes or until any unwanted smells dissipate. This will get rid of any residue in the oven before you start vaping.
What is a Pax 3?
The Pax 3 is an intuitive portable vape that can do all kinds of amazing things to make your vaping session extraordinary, but it can’t expect us to be just as intuitive . And, with such a streamlined design, it can be a bit of a guessing game to figure out the tricks and techniques that can make this vape the best you’ve ever used.
How to change the temperature on a Pax 3?
The Pax 3 has four initial temperature settings with setting one being the lowest and four being the highest. To change the temperature between these, hold down the mouthpiece button for a couple of seconds until the petals start to flash. These will then show your current temperature setting, at which point you can press the mouthpiece button again to cycle through the different settings. Once you’ve chosen one, hold the mouthpiece button or gently shake the vape to set it: 1 Temperature setting 1 - 360ºF (182ºC) 2 Temperature setting 2 - 380°F (193°C) 3 Temperature setting 3 - 400°F (204°C) 4 Temperature setting 4 - 420ºF (216ºC)
How long does it take for a vape to charge?
It should take around 3 hours for the initial charge.
Can you use a Pax 3 with Bluetooth?
As you know, the Pax 3 Vaporizer comes complete with the option to use it with an app that you can control through Bluetooth. This app actually has a mode which allows users to go about vaping as they normally would in public, but without any unwanted attention.
Why do you need a PAX 3?
Of course, the real reason to buy a PAX 3 is for the herbal vaporizing potency, but the concentrate insert is a nice touch that adds a lot of value to an already impressive offering.
When did the PAX 3 concentrate insert go away?
How to get the most out of your Pax 3 concentrate insert ... **The PAX 3 vaporizer has some features only accessible via a smartphone app. On November 15th, 2019, Apple removed all vaporizer apps from its store.
Why does my Pax sit in the wrong orientation?
For one, heat causes the concentrates to soften , and leaving the Pax sitting in the wrong orientation could cause them to clog the air holes on the concentrate insert, or seep out into the oven. There’s also the issue of proper air intake.
Which is better, PAX 2 or PAX 3?
While we wouldn’t recommend taking it much higher, that extra few degrees can really hone in the vapor production, with the slight cost of a drop in flavor. The PAX 3 has much better insulation than the PAX 2, so you don’t need to worry about burning your hands in the process.
Can you put a pax in a hammock?
If you’ve ever tried to take your PAX into a hammock, you may have noticed it doesn’t work quite as efficiently. That’s because the PAX is designed to work best when turned upright, and that’s more important with concentrates for a couple of reasons. For one, heat causes the concentrates to soften, and leaving the Pax sitting in the wrong orientation could cause them to clog the air holes on the concentrate insert, or seep out into the oven.
Does a pipe cleaner help with vapor?
A few minutes with a pipe cleaner can noticeably improve vapor production and taste. That goes double for concentrates, which can gum up the works, so to speak. The included brush can help clear out the vapor path when the device has cooled down, although a pipe cleaner will do the trick if you already keep it clean.
Can you put concentrate in a PAX 3?
Keep it lightly loaded. Finally, the concentrate insert in the PAX 3 isn’t very large , and unlike herbal mixes, which should be firmly packed, air is your friend with stickier substances. A tiny drop of concentrate, about the size of a small pea, will ensure proper airflow and plenty of room to produce great vapor.
How to pack a Pax 3?
Packing your Pax 3. Now it's time to pack our Pax 3 and get started! Remove the magnetic oven cover at the bottom of the Pax. Before placing any herb in the oven, first, ensure you have ground your herbs as finely as possible. The Pax performs best when your herbs are packed firmly and the oven is at least half full.
How long does it take for a Pax 3 to charge?
You'll know when your pax has reached a full charge when all four LEDs are white - it should take roughly two hours.
How to adjust temperature on a Pax 2?
The Pax 2 has four temperature setting. To adjust the temperature you have to put your Pax into temperature mode. To do this, when the Pax 2 in turn on, hold the power button until the LEDs turn yellow. Now you can cycle through the four settings by pressing the power button once.
Can you use Pax without it?
Although you can use the Pax without it, the Pax app allows a more bespoke vaping experience. It is available for both Android and iPhone and is downloaded from their app stores.
Can you burn off a Pax oven?
Once the battery is fully charged, it is worth performing a quick 'burn-off' of the Pax's oven - this will disinfect the oven and remove any residue left over from manufacturing.
Can you use a Pax 3 with a flat mouthpiece?
The Pax 3 can be used with either the flat mouthpiece that is fitted into the device or this can be swapped out for the raised mouthpiece. The flat mouthpiece is my favourite because it is really discreet however, some prefer the natural feel of the raised mouthpiece.