How do I use my arizer solo vaporizer?
Here are some instructions you can follow while using your Arizer Solo Vaporizer! To turn on the unit press both the up and down buttons for a few seconds. The unit will beep and then begin to heat up. The sound function can be turned on and off by powering on the unit and holding down the up button for approx three seconds.
Can I use essential oils with my arizer solo?
A: Yes, to conserve battery life the Arizer Solo comes with auto shut-off function, so your vape will turn off after running for 12 minutes. Q: I’m really into aromatherapy, can I use essential oils with my Solo? A: Sure, not a problem.
What is the difference between the arizer solo and the air?
A: The Solo has a battery life of about 1.5 hours on a full charge while the Air has about 1 hour on a fully charged battery. * For your information the Arizer Air short glass stem is not included in the Arizer Solo kit. It is available for purchase @VapeFuse. Q: Where can I find the Serial Number of the Arizer Solo?
How do I adjust the sound on the arizer solo?
A: To manage your Audio/Beep sounds, simply power on the vaporizer, then press and hold the Up Arrow for approximately 3 seconds. Q: How much herbs can I put into the Arizer Solo?
Can you use oil in Arizer Solo 2?
Q: I'm really into aromatherapy, can I use essential oils with my Solo? A: Sure, not a problem. Put few drops of your favorite essential oil to the aroma dish, heat the Solo up to your desired temperature and just sit back and enjoy.
How do you use arizer solo vape?
2:173:50Arizer Solo 2 : Unboxing & How to use - YouTubeYouTubeStart of suggested clipEnd of suggested clipHit to turn the solo on you just hold down the menu. Button and the up down button at the same timeMoreHit to turn the solo on you just hold down the menu. Button and the up down button at the same time for a couple of seconds.
Can I vape hash in arizer solo?
The Arizer Solo is suitable for use with dry sift or crumbled up hashish when mixed in with ground cannabis. If you've ever wanted to supercharge your vape's chamber before, grab an Arizer Solo and get hash vaping today!
How do you vape with Arizer?
1:043:46Arizer Air Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn the unit upside down. And place it on top of the glass diffuser stem. Once the stem has beenMoreTurn the unit upside down. And place it on top of the glass diffuser stem. Once the stem has been fully inserted into the unit. You can turn it all right side up again and you're ready to vaporize.
How long does a solo vape last?
All you do is draw on your disposable vape when you're ready, and it should last around 300 puffs, depending on your vape style.
How do you fill the arizer solo 2?
3:0012:24Arizer Solo 2 Review & Tutorial -Tools420 - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside it doesn't fall into the chamber it just nice and packed it goes in the other way you canMoreInside it doesn't fall into the chamber it just nice and packed it goes in the other way you can just grab your butt. Break it down into pieces. And you just shove that in here.
What temperature do you vape hash at?
390-428ºFOf course, if you're looking for lighter effects, by all means keep your vaping temperature lower. But for most users looking for the maximum quantity of cannabinoids from their hash, a range of 390-428ºF (210–220ºC) is the sweet spot.
Can you vape dry sift?
Crumbly dry-sifted hash can be easily separated into smaller portions, will vape with ease, and is much easier to clean up afterwards. A lighter density means that dry-sifted hash will heat and vaporise evenly.
Can I put Kief in my wax pen?
Technically yes, you can dab kief, as it's a cannabis product containing THC. You can dab it in any of its various forms – kief oil, hash oil, or even solid hash. You could sprinkle kief that you've collected into either a dab rig or a dab pen, or roll it up into a little hash ball.
What temperature should Solo 2 be set at?
– We recommend that you start vaporizing at the temperature of 180-185 degrees Celsius. This way, you will be able to enjoy an outstanding flavor of the vaporized herbs. – After a few draws, increase the temperature to 190-195 – we believe it's the best temperature for the majority of the session.
How do you use a vape table top?
5:447:01Easy Vape Vaporizer Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd all you need to do is to use the mouthpiece. And draw on the mouthpiece. And you can see someMoreAnd all you need to do is to use the mouthpiece. And draw on the mouthpiece. And you can see some vapor. Already coming from the unit now you can leave it like this not much vapor will escape.
How do you pack an arizer air stem?
Scoop to load To load the Air 2, use the stem's end to scoop up ground herb, and pack it down lightly with your finger. You can also try packing your herbs by sucking them up like a straw right out of your grinder.
How to adjust the power level of Arizer Solo?
To adjust the power level, you will want to press the up arrow to go up on temperature, or the down arrow to go down on temp. You have 7 different temperature settings. The temperature settings for Arizer Solo are as shown below: I normally keep mine at 4, where it’s not too hot of a vape, and it doesn’t burn up the bud completely.
How long does it take for a vape to heat up?
It will heat up very quickly, and takes less than 5 minutes to heat up. When it reaches your desired temperature level setting, you are ready to vape! When taking hits or pulls off of the mouthpiece, you will want to take long, but light pulls. It’ll be around 8-10 second pulls.
How long should you hold your breath before you vape?
Not only this but also there the advantages and disadvantages mentioned related too different products. Once inhaled, hold your breath for about 5 seconds, and then exhale slowly. You will not only achieve a successful vape, but should also see a larger and more thicker clouds, or vapor production.
What to use to tap out product without breaking glass tube?
You might consider getting a Pulsar Tap Tray or something similar such as a silicone ashtray to tap out product without risk of breaking the glass tube. Be sure to cap the heating element with the cap attached to the element to stop dust and other materials from getting into the element.
How long to heat up a glass tube?
Straight out of the box, we recommend heating it up for at least 7 mins to burn off any residue left from manufacturing. Then take your tube and align it straight and insert it into the seal. You will only need to do this once. These glass tubes are hand made and some vary in size slightly.
Does vaping produce a thicker cloud?
A higher temperature produces a thicker vapour, lower produces a lighter vapour. At any point if you get a thick cloud, or if your product burns be sure to turn down the temperature to ensure you are vaping and not smoking. You will find that drier product has a lower vaping temperature, and moist product a higher temperature.
How to turn on Solo II?
Hold down the middle and top buttons to turn on the Solo II. You can use the up and down arrows to set the temperature, which will initiate the heater, and the heating icon will turn on. The small numbers on the bottom are the target temperature, and the upper numbers are the current temperature.
How to change settings on Solo II?
The Solo II has a number of more specific settings to customize your sessions. Press the center Menu button to enter the settings menu, then use the up and down arrows to change the settings.
How to empty a vape stem?
The oven-end of the stem can get pretty warm, so the best way to empty your stem is to remove it, and blow on the mouthpiece-end. You should also turn the vape upside down and blow into the oven lightly to dislodge any bits that might have fallen in.
What grind do you use for Solo II?
Coarse grind. When grinding for the Solo II, we recommend a medium to coarse grind, or none at all. The Solo II is more than happy to handle even full chunks of herb without any grinding, but if it’s too fine, some of the bits can pull through the screen and into your mouth.
How long does it take to charge a Solo II?
This could take over four hours the first time, but won’t take as long on subsequent charges.
Does Solo II have air flow?
The Solo II’s air flow has been opened up compared to the original. Packing makes the most difference here -- pack less if you want your draws to be more free flowing. If you still find your hits too restrictive you can lift the stem up just a hair so it’s not touching the bottom of the bowl to bring in even more air.
Can you suck herbs into the stem straight out of a grinder?
Some like to suck the herbs into the stem straight out of the grinder because it’s really easy, but I think Arizer has pretty much nailed the process with their instructions and I prefer their method of plunging it into the herbs and letting it grab them.
What is Arizer Solo?
A: The Arizer Solo is designed to be used with coarsely ground dry herbs. The small holes on the glass mouthpieces allow sufficient amount of hot air to pass through your herbal materials and as per the maker of the products, they eliminate the need for using any additional mesh or filter screen.
How long does the Arizer Solo battery last?
A: The Solo has a battery life of about 1.5 hours on a full charge while the Air has about 1 hour on a fully charged battery. * For your information the Arizer Air short glass stem is not included in the Arizer Solo kit. It is available for purchase @VapeFuse.
What does it mean when your Solo Vaporizer is charging?
A: Nothing to worry about, it just means that your Solo Vaporizer is charging. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How to raise the temperature on a Solo?
A: All you have to do to raise your Solo’s vaporizing temperature is to press the Up arrow on the device. If you want to lower the temperature, then just press the Down arrow.
How long does it take for a syringe to cool down?
Just make sure not to take the glass stem out from the chamber straight away after use. Let the device and parts to cool down a bit, 2 to 5 minutes or so, and then it should be safe for you to touch it.
Where to find the serial number on Arizer?
A: Absolutely, we store genuine Arizer products only. You can see the unique serial number at the bottom of your device . Please note, glass parts can slightly vary, they are all handmade with care.
Does VapeFuse carry Arizer?
A: Yes, don’t worry, we only carry original Arizer vaporizers ( Extreme Q , V-Tower , Solo and Air) in our stores. VapeFuse is an authorised reseller of the Arizer products.
Charging your Solo II
The Solo II arrives partially charged, but we would recommend charging it to full before using it for the first time
Perform a quick burnoff of the oven
Once the battery is fully charged, it is worth performing a 'burn-off' of the oven. This will clear the oven of any leftover residue from manufacturing.
Packing your Solo II
Unlike many other dry herb vaporizers, the Solo II works best when your herbs are coarsely ground.
Setting the temperature
Power up the Solo II by holding the (M) and (^) buttons for up to 6 seconds. The timer will count down on the OLED screen showing the power-on delay and a greeting message is displayed when the unit is powered on.
lnhaling from your Solo II
To get the most out of your herbs and optimal cloud production, we'd recommend taking slow, steady draws for 10 seconds or more each.
Cleaning your Solo II
The Solo II itself is very low maintenance so you can spend your time using it rather than cleaning it!
