Using a vape pen with a live resin cartridge is by far the simplest method. Simply buy a live resin cart, attach it to your battery, and you’re ready to go. If you're used to smoking dried flowers, you can experience a heightened high with the terpene-rich Live Resin.
How to vape live resin?
For Live Resin, it is advised to a spoon-shaped tip instead of a flat-tipped dabber. Now heat the nail with a torch lighter, typically butane lighters. It is important to note that a very hot nail will burn the live resin and its flavour and essence. On the other hand, a cold nail will not vaporise it perfectly.
How to smoke live resin?
Using a vape pen with a live resin cartridge is by far the simplest method. Simply buy a live resin cart, attach it to your battery, and you’re ready to go. If you're used to smoking dried flowers, you can experience a heightened high with the terpene-rich Live Resin. Just sprinkle it on your packed bowl of the flower when using a bong.
How to make live resin?
The Live Resin making process usually has the following five steps: Use a very minimal amount of heat to the solution, which helps to enhance the vaporisation of the solvent. The end step is to chill the solvent tank to recondense the vapours.
What are live resin cartridges and how are they made?
But fear not, extract processes have crafted live resin and live resin cartridges. So, What Is Live Resin? Live resin is a form of cannabis concentrate manufactured by taking freshly harvested cannabis and flash freezing it.
How do you smoke live resin in a vape?
The best way to consume live resin is by dabbing or vaping it, but you can also sprinkle some in your joints or throw some on top of a bowl. It's typically a sticky, waxy substance that's yellow-ish in color, so you'll want a dab tool or something else to help you collect the concentrate.
Is Live resin good to vape?
If you're looking for a safe and effective way to consume medical cannabis, consider vaping live resin. Airopro makes some of the best vape pens on the market, and their products are available at The Stone. With Airopro, you can be sure you are getting a quality product that is safe and healthy for you.
What temp should I vape live resin?
315 - 400 degrees F°In general, 315 - 400 degrees F° is the recommended temperature for live resin dabs. So, stay to the lower end of this range for the fullest taste.
How do you melt live resin?
Arguably, the simplest way to use live resin is to smoke it. Just use a dab tool or a toothpick to place some on top of the ground bud in your bowl. When exposed to flame, the resin will melt down into the bowl, covering the herb inside, and making it several times more potent.
Are live resin carts better for you?
Live resin tends to be much higher in flavorful terpenes than vape oil, but quality vape oil tends to have higher concentrations of THC. There's more to potency than THC, though. The total cannabinoid content of Raw Garden Live Resin Carts, for example, hovers between 87% and 93%. This is a good thing.
Is Live rosin safe to smoke?
Furthermore, live rosin is the best option for your body because of its purity. Other extracts will always contain trace amounts of butane or other solvents. If you smoke or eat those other extracts, you're consuming potentially dangerous chemicals.
Do live resin carts hit harder?
The strength of this effect means that in a direct comparison of an average 90% pure THC distillate and a 45-50% pure live resin, the live resin is almost certain to create a noticeably more potent effect. This is because all of the different elements of cannabinoids and terpenes and so on work together.
Are live resin carts better than distillate?
A live resin extract vape cartridge isn't as potent as a distillate cartridge — the THC percentage of resin usually hovers somewhere around 45 or 50 percent, while distillate can weigh in at 85 or 90 percent THC — but, because of the entourage effect, choosing weed based on THC levels doesn't necessarily make sense.
How to use live resin in vape?
Using a vape pen with a live resin cartridge is by far the simplest method. Simply buy a live resin cart, attach it to your battery, and you’re ready to go. Sprinkling the Live Resin. If you're used to smoking dried flowers, you can experience a heightened high with the terpene-rich Live Resin.
How to consume live resin?
Dabbing. Live Resin is a concentrate which means the most popular method to consume it is to dab it. For the experienced cannabis user, dabbing is a pretty simple method where you place the dab/concentrate on a heated bowl and inhale the vapour. If you're not familiar with dabbing, let me explain it to you.
What happens when you dry weed?
As you dry and cure cannabis, it is bound to lose some terpenes during the process. Terpenes are responsible for the taste and aroma of the cannabis bud, from skunky, earthy, to sweet and citrusy. When the cannabis is left to dry, the most volatile terpenes are evaporated, which then changes the flavour of the bud.
What are the terpenes in cannabis?
The terpenes that are retained during the flash-freezing methods are responsible for the aroma and flavour of each cannabis strain. These essential oils or terpenes, then work to give the concentrate a distinctive taste, smell, and other characteristics, such that one has never seen before.
What is the difference between live resin and vacuum purge?
Live Resin process has a critical difference, compared to other types of extractions, which is the temperature of the vacuum purge . This is carried out to retain the essentials oils as much as possible and to prevent the evaporation.
What is the process of extracting a cannabis plant that has not been cured or dried?
The process and the end product that is extracted from the fresh cannabis plant that has not been cured or dried is known as Live Resin. The process is carried out to preserve the terpenes, which in other methods are lost during the process.
How to store concentrate?
For this reason, you should know the accurate way to store it. Place the concentrate container in a cool environment, either a refrigerator or a cold room away from sunlight. Make sure your container is airtight as the open-air can make it lose its potency, and can even change the colour, texture, and taste.
What is live resin?
Cannabis concentrates are often named or described by their textures or consistencies: some are hard and brittle, like shatter; some waxy; and some like sauce. Live resin is a more malleable concentrate, sitting somewhere between a wax and a sauce—not quite like taffy yet not too wet.
How to make live resin
Live resin distinguishes itself from other types of cannabis concentrates because it is created with fresh frozen cannabis—plants that are frozen immediately after being cut down at harvest. These plants are kept frozen throughout the extraction process and skip the drying, curing, and trimming phases of harvesting.
Benefits of live resin
Dabbers love live resins because they are more flavorful and “terpy” than other concentrates. In preserving trichomes and terpenes, they retain the flavor profile of the original plant. Preserving trichomes also keeps cannabinoids intact, and live resins are also known to be potent.
How to store live resin
Keep live resin cool and in an air-tight container, preferably in a fridge if you can. This will preserve the terpenes and keep it tasting and smelling great for a while.
How much does live resin cost?
Live resins have come quite a long way since their inception. As recently as a few years ago, they were a new, rare product only found in certain connoisseur markets at premium prices, sometimes exceeding $100 per gram.
How are live resins different from one another?
Live resins can differ slightly in consistency—although they sit between waxes and sauces, some can be more like saps, sugars, or jellies.
Where did live resin originate?
Live resin is relatively new to the cannabis concentrate scene. Its humble origins go back to 2011-2013 with a small group of growers and extractors in Colorado.
How to make live resin?
Step 1: Freeze Your Biomass. Material preparation for making live resin is probably the single biggest differentiator when comparing it to other concentrates made with hydrocarbon solvent. Rather than drying or curing your plant material before extraction, you are going to deep freeze the biomass.
What solvent is used to make resin?
Solvent Blend. To make live resin most processors are going to use a light hydrocarbon blend of butane and propane solvent. It is not uncommon for a blend ratio to be 70% butane and 30% propane. However, we often see processors using a 50/50 blend, as well as a 30% butane and 70% propane blend. The ratio you choose is going to depend on a number ...
What is active solvent recovery?
When a compressor is used for recovery it is known as “active solvent recovery”. It is possible for an extraction system to run “ passive ” as well. It is worth noting that an inline dewax column to capture lipids and waxes sometimes found in hydrocarbon extraction will not be necessary here.
How to freeze biomass?
To freeze your biomass: 1 Use only your top-quality whole plants, including the flowers and sugar leaves. Exclude the fan leaves, stems and roots. 2 Freeze the biomass in a deep freezer at -10F or lower. 3 Freeze your biomass for no longer than 24-36 hours. 4 Perform your extraction as soon as possible after removing the frozen biomass from the freezer.
Why do we vacuum the oven?
A vacuum is pulled on the oven to remove the atmosphere inside, and this enables us to boil off the solvent at a lower temperature effectively purging it out of our live resin without damaging or losing those terpenes.
How long can you freeze resin?
Exclude the fan leaves, stems and roots. Freeze the biomass in a deep freezer at -10F or lower. Freeze your biomass for no longer than 24-36 hours.
Can terpenes be frozen?
Terpenes contain the smells and aromas of the plant, a must to capture and preserve in order to make an artisanal concentrate. Drying, oxidation and heat will degrade the smells and flavors of the biomass. So when making live resin – frozen is best! To freeze your biomass:
What is live resin?
Live resin is a form of cannabis concentrate manufactured by taking freshly harvested cannabis and flash freezing it. Extractors flash freeze the fresh flower to subcritical temperatures before and throughout the process of extraction. When it comes to live resin vs. rosin, live resin requires specific, proprietary equipment.
What is the difference between live resin and rosin?
The key difference between live resin and other extracting processes comes from the resulting potency and overall profile integrity.
Does terpene help with nausea?
This exclusive strain perfectly balances both a body and cerebral high. It may help with treating chronic pain and nausea. The terpene profile will mainly depend on the original strain utilized during the extraction process. Therefore, the live plant’s terpene profile will dictate the end-product concentrate.
Is live resin the same as vape?
Live resin vape. On the other hand, not all live resin products are equal. So, purchase with caution. Again, the two main differences when it comes to live resin are viscosity and terpene profile. With regard to the former, live resin comes in a number of different forms.
How to store resin?
(Hint: the answer is to store your live resin in a fridge in an opaque, air-sealed container.)
What is the purpose of terpenes in cannabis?
As the terpenes are responsible for the aromas and flavors which each strain of cannabis possesses, this means that most other types of cannabis concentrate lose a great deal – or sometimes all in the case of highly purified concentrates – of the flavors of the original cannabis plant during production.
Why do terpenes smell?
Because terpenes give cannabis its flavor. In fact, these organic compounds are responsible for the flavors and smells of all kinds of plants as well as some insects. Some of the most famous terpenes include: Beta-pinene, better known as the aroma of fresh pine needles, but also found in many strains of cannabis.
What is the process of turning non-activated cannabinoids into activated THC?
Decarboxylation is the process which turns the non-activated “versions” of the cannabinoids in the cannabis plant into the activated THC, CBD and so on which can interact with your body’s endocannabinoid system to produce the many effects cannabinoids do. Heat is an important part of decarboxylation.
What are the elements in cannabis?
These elements include terpenes, phytonutrients as well as the other beneficial cannabinoids found in cannabis, such as: 1 CBD (cannabidiol) 2 CBC (cannabicromene) 3 CBDV (cannabidivarin) 4 CBG (cannabigerol) 5 CBN (cannabinol)
Can you use a dab rig to activate resin?
Dab rigs are perfectly suitable for activating live resin too. The only really vital thing to consider is that the fragile terpenes and phytonutrients in live resin can still be destroyed if you use to much heat to activate the cannabinoids….
Can you vape resin in a pen?
With your live resin in a pen or vaporizer, there’s no need to mess about heating your nail to the right temperature. All you need to do is set your vape pen and inhale. Do be sure to purchase a higher quality pen though. Any old THC vape pen is usable, of course.
What Makes Live Resin So Special?
Following harvest, a cannabis plant must be taken care of on extreme levels, otherwise, its flavor and natural terpene profile may be altered. The goodness and liveliness of the plant must be kept alive, so to speak.
The Difference Between Resin, Rosin, and Live Resin
Resin is defined as a sticky ooze that certain plants such as cannabis exude in different ways. Resin contains the active chemistry that identifies the plant itself and differentiates it from others. In particular, resin circulates those highly valued cannabinoids. Anything resinous will stick to your fingers when you handle it.
How Live Resin is Created
Live Resin can be dated back to 2012-2013 when a team of Colorado growers pioneered the extraction process. As briefly mentioned before, the process begins by flash freezing fresh cannabis, by placing it in a freezer with dry ice or by being slowly dipped in liquid nitrogen.
Consumption Methods
Live Resin is a concentrate. The most popular way to consume it is dabbing. Dabbing is where you place the concentrate on a heated bowl and inhale the vapor. Vaping is another form for consuming live resin. Lets dig into each one a little deeper.
All Things Considered
The process whereby live resin is produced produces highly potent cannabis brittle with minimal plant material and solvent traces. One might say that the resin is alive, hence the term ‘live resin’! However, it’s unfortunately not recommended to make it at home. Most people do not have the tools or skills to do it safely and properly.
How hot does a terpene vaporizer get?
Popular terpenes vaporize from 122 Fahrenheit (50 Celsius, ocimene) to 388 Fahrenheit (198 Celsius, linalool) and many points in between so being able to dial in the experience is important to some.
How to store badder and budder concentrate?
To ensure a long and stable shelf life, store your badder and budder concentrates in an airtight, opaque container in a dark, cool environment. Moisture, oxygen, light, and warm temperatures all speed up the degradation process and could alter the consumption experience. These same factors can also affect the aroma, color, ...
What is the best way to consume concentrates?
Dabbing is the most common way to consume these concentrates. Using a dabber or dab tool with a flat tip — as opposed to dabber with a scoop-style tip — allows consumers to pick up the budder and keep it tacked on the tool. When the flat-tip dab tool makes contact with a heated nail, the badder or budder vaporizes almost instantly.
How are wax and budder similar?
Wax and budder are similar in that they both involve a whipping process that incorporates air into the final product. Wax and budder concentrates are also malleable and easy to manipulate with a dab tool, which is why they're so popular. The difference lies in how long wax and budder are whipped.
What is a badder, batter, and budder?
Badder, batter, and budder are terms used to describe the texture of certain cannabis concentrates . Badder, batter, and budder are terms used to describe the texture of certain cannabis concentrates. Photo by: Gina Coleman/Weedmaps.
What is a budder extract?
Badder and budder are typically considered extracts because they are primarily made using liquid petroleum gases (LPG) such as butane and propane. As with other textures, the process involves a closed-loop system. The only difference is the post-extraction technique.
Can you make cannabis concentrates at a dispensary?
Bottom line: Solvents can be flammable and handling them can cause skin irritations and explosions. As such, only licensed professionals should manufacture cannabis concentrates. The rest of us can purchase them safely at legal, licensed dispensaries.
What is live resin?
In fact, that’s where the product gets its name: the “live” in live resin refers to resin extracted from live plants. Because live resin is processed without first decarboxylating the plant, the resulting concentrate more accurately captures the terpene profile of the living plant.
How much THC is in live resin?
Concentrates like live resin can weigh in at 80-90% THC. Compare that to plant matter that is smoked which can go as high as 25% THC, and you can quickly see why live resin is becoming so popular. Having said that, the point of live resins is not THC content.
What are the terpenes in cannabis?
These heavy terpenes are responsible for the more pungent scents that the cannabis plant gives off like skunk, musk, patchouli, tea tree, diesel fuel, and sandalwood. Because they are lighter, monoterpenes evaporate faster after the live plant is cut from its growing medium.
Why are terpenes hard to store?
Because terpenes are just chemicals, they can have an effect on the viscosity of the live resin pulled from the plant. But most often, the more liquid live resins will be altered after the fact. For example, the more “sappy” (as in sap-like, not excessively sentimental) live resins are hard to store and transport.
What is the purpose of butane in cannabis?
This serves to purify the extraction so that it can be ready for human consumption.
What is the solvent used in resin?
The most common solvent is butane, which is why most concentrates are referred to as butane hash oil or BHO. But butane isn’t the only solvent available and some live resins are produced with these alternative liquids. Other possible solvents include carbon dioxide (CO2), isopropyl alcohol, and chloroform.
How much terpene content does dried and cured plant material lose?
In fact, normally-processed plant material (i.e., dried and cured) can decrease in terpene content by as much as 60% before it reaches your bong or brownie mix. That’s a significant loss of these important compounds. To stop the loss of these important terpenes, the whole plant is quickly frozen.
