how to use ego aio vape

by Dr. Flavie Kiehn Published 3 years ago Updated 2 years ago

To vape, turn the device on by pressing the fire button 5 times in quick succession, then hold the button while inhaling on the mouthpiece. The button light on the kit will flash 5 times to indicate that it is on. The AIO is turned off in the same way. 4. Replacing the coil Your Joyetech eGo AIO Kit comes with 2 coils.

Full Answer

How to use Joyetech ego AIO vape?

Instructions 1. Charging the battery. Before using your Joyetech AIO for the first time, make sure the battery is fully charged. 2. Filling the tank. To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid... 3. Using the device. To vape, turn the device on by ...

How do I use my AIO vape?

How to use the Joyetech eGo AIO e-cigarette. How to turn on and off. To turn on the eGO AIO, you need to press the power button five times in a row quickly. If the operation is successful, the device will flash in turn ... To turn off the e-cigarette, you …

How to charge ego AIO?

You will need to prime your atomizer with e liquid for it to get saturated before you start vaping, for this atomizer you need to drip 5-6 drops of e liquid directly down the small hole at the top of the atomizer itself. Since these have such small holes to drip the e liquid into you may need to wait a second after each drop for it to soak in.

What is the best AIO e-juice machine?

Press the cap to unscrew the atomizer cap, then inject the liquid directly into the cambered slot. NOTE: 1.In order to avoid overflow when reassemble please don't overfill. which you can refer to the follow picture 2. Please drip a few drops of e-juice to the atomizer head before its first use to avoid dry burn. Adjustment of Air Inflow

What does it mean when my eGo AIO blinks?

If you go to use the vape pen and the LED light is blinking while you are holding down the button, that is signaling one of two things - either your battery is dead OR it is not recognizing your atomizer. If you know that your device is definitely charged, check your coil.

Why does my eGo AIO taste burnt?

That burnt taste can occur if there's not enough e-liquid on the wick inside your atomizer coil. The wick is the part of your device that soaks up the e-liquid, which is then turned into vapour when the coil heats up.

How long should I let my new coil soak?

– 10 minutes

It is a simple process and can save you burning your coil and wick when you first install your new atomizer. Simply add a few drops of e-liquid onto the wicking material of your atomizer head before you install it into your tank. Then after filling your tank leave it to soak for 5 – 10 minutes.

Why does my vape crackle?

When inhaling on your device, vape juice is drawn into the coil. It is then the coils job to heat up the e-liquid and turn it into vapour. Like with most liquid when it is heated rapidly it will make a crackling noise as it turns into vapour.Jul 20, 2021

How to use Joyetech AIO?

Before using your Joyetech AIO for the first time, make sure the battery is fully charged. Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2.

How to connect AIO to computer?

Connect your AIO Kit to a computer using the USB charging cable included in the pack; you'll know when it's charged as the button light will go out. 2. Filling the tank. To fill your tank, press down on the cap and twist to unscrew the top cap.

Can an e-cigarette leak?

All e-cigarette kits can be prone to leaking, but given the right care and maintenance this can be avoided. Here are some tips that may help you avoid a leaking clearomizer: Check to make sure the coil is sitting centrally. If not positioned correctly, this can cause leaking.

How to fill a e-liquid tank?

To fill your tank, press down on the cap and twist to unscrew the top cap. Drip your e-liquid directly into the tank, making sure not to fill above the max fill line (2ml). If you fill your tank above this line, you'll find that the tank overflows when you try to replace the top cap and coil.

What's Included with the Joyetech AIO

When you first open up your box you're going to see the instruction manual, your AIO vape pen and a long white box. Inside this box you will find your charging cable, two 0.6 ohm atomizers, and an extra mouth piece.

How to Use the AIO Vape Pen

So you've got your atomizer primed and installed and your tank is filled up with e liquid all that's left to do is start vaping on it! Your device should have come turned off, in order to turn it on (and back off) you need to do five quick clicks on the button.

How to Clean Your Joyetech eGo AIO

Cleaning the AIO is a breeze given the fact that it is a leak resistant vape pen. If you used a small starter kit such as a Kangertech EVOD before getting this Joyetech eGo AIO, you might remember how you had to clean a few different pieces.

Joyetech eGo AIO Mod

The Joyetech eGo AIO (all-in-one) battery and tank combo is perfect for those who want great performance with an easy to use system. The eGo AIO features a childproof pressure twist cap on the tank, as well as a five click on/off feature.

Joyetech AIO Specifications

Diameter: 19mm#N#Length: 118.05mm#N#Battery Capacity: 1500mAh#N#Tank Capacity: 2.0ml

Joyetech eGo AIO Kit Includes

2 x 0.6Ω eGo AIO Replacement Coils#N#1 x eGo AIO Mouthpiece#N#1 x USB Charger Cable#N#1 x 2ml Childproof / Leak Proof Tank

Vape-FAQ.com