- Plug E-Nano into a 120v AC receptacle. Turn dial up to 7-8. Allow 3-4 minutes for unit to pre-heat. ...
- Load a small amount of herb (between .025-.050 grams) into the glass stem. The E-Nano is extremely efficient. Putting too much herb into the stem will restrict airflow. ...
- Place glass stem onto heater port and inhale (draw) slowly to allow the heated air to pass through the herb. A good draw speed is like sipping a thick milkshake. ...
- Check color of the herb in the stem. The load is fully extracted when the herb is a consistent brown color. ...
- When your session is finished, remove glass stem from the heater port. Note: Never leave a glass stem on a hot heater port.
- The E-Nano is designed to be plugged in 24/7. Set the dial to 4-5 and you can use the optional aroma therapy cup to diffuse your favorite essential oils. ...
Full Answer
How efficient are E-nano vapes?
Plug E-Nano into a 120v AC receptacle. Turn dial up to 7-8. Allow 3-4 minutes for unit to pre-heat. Higher numbers on... Load a small amount of herb (between .025-.050 grams) into the glass stem. The E-Nano is extremely efficient. Putting... Place …
Is the epicvape E-Nano the best desktop log vape?
Setting up your E-Nano log vaporizer takes just a few seconds. Take the power adapter and plug it into any wall outlet, and plug the other end into the unit. We’re going to fire this session up with flavorful, but potent vapor, so set the temperature dial anywhere between six and seven. Let’s get the glass stem ready in the meantime.
How long does an e-nano log vaporizer take to heat up?
Setting up your E-Nano log vaporizer takes just a few seconds. Take the power adapter and plug it into any wall outlet, and plug the other end into the unit. We’re going to fire this session up with flavorful, but potent vapor, so set the temperature dial anywhere between six and seven. Let’s get the glass stem ready in the meantime.
How do you use the E-nano concentrate pad?
Establishing your E-Nano log vaporizer takes simply a couple of secs. Take the power adapter and also connect it right into any kind of wall surface electrical outlet, and also connect the various other end right into the system. We’re mosting likely to discharge this session up with savory, however powerful vapor, so establish the ...
How do you use the e-Nano vaporizer?
E-NANO USER GUIDEPlug E-Nano into a 120v AC receptacle. ... Load a small amount of herb (between . ... Place glass stem onto heater port and inhale (draw) slowly to allow the heated air to pass through the herb. ... Check color of the herb in the stem. ... When your session is finished, remove glass stem from the heater port.More items...•
What is e-Nano?
The E-Nano is a simplistic log vaporizer that takes up very little space, and offers everything you need in a convenient package. Crafted from sustainable hardwood, the E-Nano provides lasting power and strength with it's ceramic heating element.
How do you clean a nano vape?
Soak and brush Remove the silicone grips and put the stems in a large zip-lock bag of rubbing alcohol. Give it a few gentle shakes, and let them sit for a few hours. Rinse, dry, and that's it! If you tend to leave your vape on for most of the day, leftover bits on the heater or in the well may create a sticky mess.
What is the most efficient dry herb vaporizer?
Flowermate V5S. Finally, the Flowermate V5S is the most-efficient vaporizer under $100. It has conduction heating, but the ceramic chamber makes it heat up more evenly, which makes it more efficient. Flowermate V5S is easy to use with a single button operation and stays charged for use for up to two hours a charge.
What is a sticky brick?
Sticky Brick vaporizers are dry herb butane vaporizers made from natural hardwood. Sticky Brick vapes feature full convection heating and they are some of the best tasting vaporizers on the market. Product Brand: Sticky Brick.
What is a log vape?
Log vapes are usually wooden, easy to use, hand made desktop vapes. They are known for using small amounts of bud and being a good starting point for a desktop vape. Logs can be used dry or with an adapter for water pipes. One brand even works with dynavap tips.
How do I look after my vape pen?
Looking After Your E-Cig & Vape BatteriesClean the Battery Contacts Regularly. ... Keep Batteries Out of Sunlight & Extreme Temperatures. ... Mark Your Batteries So You Know When To Replace. ... Don't Overcharge Your Batteries. ... Store Your E-Cig Batteries Carefully. ... Turn Off When not In Use (Not Applicable to Cigalike Kits)
Does vape juice expire?
Expiration date is a main indicator that vape juice is still usable, so avoid expired vaping liquids. This can negatively affect your health, and the taste and flavor will be far from perfect.
How do you dispose of vape juice?
Simply pour your e-liquid into the kitty litter and allow it to clump up. Once the litter has absorbed the liquid, toss the used kitty litter in a sealable bag and throw it out with the trash as per usual. Then you can toss your empty glass or plastic bottle into the recycling bin.
Are dry herb vaporizers worth it?
Overall, most people that own a dry herb vaporizer think they are definitely worth it! Vaping is less toxic for your health than smoking your herb, it makes your herb taste better, and in the long run, it helps to make your herb last longer than burning it up all at once.
Are dry herb vaporizers safe?
There is also no second-hand smoke to worry about, so others around you won't be affected. Overall, it is thought that the dry herb vaporizers do not pose any health risks. There is no question that they are much better for your health than traditional smoking of any kind.
Do dry herb vaporizers smell?
One of the most asked question over the past five years has been “Do dry herb vape pens smell?” The short answer is yes, vaping weed does smell. All kinds of vaporizers are going to smell so don't expect to go completely James Bond incognito with them.
EpicVape E-Nano Review: Decadent vapor
The E-Nano log vaporizer doesn’t look like much of a competitor at first glance, but it provides one of the most well-rounded hits you can find from a vaporizer. Each hit brushes your lips with a subtle warmth and terpene-rich character that will surprise with rich flavor and thick clouds.
Beautiful, solid construction
Vaporizers that can spice up any decor don’t come around too often. Vapes that are endearing and perform well are even harder to find, but the E-Nano qualifies. The handmade, hardwood finish combines natural beauty and durability with simplistic functionality.
Heats up in a few minutes
The E-Nano log vaporizer goes from cold to ready-to-vape in about two to three minutes, but the longer it heats up, the better. Five to 10 minutes of heating should do the trick, or you can turn the dial all the way up for a few minutes, and dial it back down to your desired temp.
Variable bowl size
Each E-Nano has a glass stem with a sliding metal screen that allows you to adjust the load size to whatever you want. The included multitool has two different settings to easily adjust for small and large doses. Adjust the temperature and your draw speed accordingly and find the combination that works best for you.
Great with concentrates
The E-Nano does an exceptional job with concentrates. It doesn’t come with a concentrate insert, but a mesh insert like the POTV ONE Concentrate Pad fits the glass stems perfectly. Replace the basket screen in the stem with the concentrate pad, place a rice-grain size amount of material onto the pad, and have at it.
Adjustable temperature dial
The E-Nano boasts a broad temperature spectrum, all the way up to 560° F (293° C), to cover all of your needs. Each setting has a purpose. For example, settings 3 to 4 can be used for diffusing concentrates with the E-Nano Aromatherapy Cup, 5 to 7 for typical dry herb vaping, and 8 and above for concentrates.
King of microdosing
Log vaporizers (small desktop vapes made from a block of wood) are known among enthusiasts for being ultra efficient, and the E-Nano is a shining example. Its full ac power and narrow bowl can fully extract loads as small as 0.015 grams with a satisfying hit that’ll leave you questioning the need for bigger bowls.
How does an E-Nano work?
From it’s inception the E-Nano was designed for the purest air path and true flavor. Ambient air enters the top of the vaporizer and through the holes in the food grade stainless steel heater sheath. The air then travels past the 100% ceramic lifetime guaranteed heating element where it is heated from zero to 550 degrees depending on where the analog rotary dial is set on the cord. The heated air passes through your favorite herb volatilizing and releasing the active agents in your herb. Unlike most vaporizers the air you breath never comes in contact with or passes through any electrical circuitry.
What is an E nano?
The E-Nano is the next revolution in vaporizers. No more complicated, messy-smelly whips or bags, or noisy pumps, and things that look like a science experiment that you want to hide under your desk.
How many watts does an E-Nano draw?
This ensures that you will never out draw the E-Nano no matter how fast or long you hit it. At full power the E-nano only draws 15 watts. Most users keep the E-Nano set at about 9-10 watts. As a comparison, most ‘box’ type desktop vaporizers draw between 40-60 watts. The Volcano draws over 100 watts.
What size glass adapter for E-Nano?
Glass on glass (GonG) adapters are optionally available to fit standard 14mm and 18/19mm standard glass joints.
