How to use the Pulsar APX Wax Vaporizer:
- Pull off the glass mouthpiece to expose the heating element.
- Load the wax onto the coil before powering it on to preserve wax.
- Place glass mouthpiece back on the vape.
- Press the button five times to turn it on and then another time to start heating it.
- Wait 5 seconds.
- When the "P" turns green, it is ready for vaping
How to put wax in a vape pen?
The substances you can use with Vape pens include:
- E-juice
- CBD Oil
- Dry herbs
- Wax
Can you use any vape pen for wax?
The best way to vape wax is to use a vape pen specifically designed for dabs. There are cartridges that work with your standard vape pens, but most dab pens provide a bit more airflow and generally have atomizers with ceramic or quartz quicks that can handle the higher temperatures required for dabs. Unlike oil cartridges, you can press the button before inhaling to preheat your dabs.
Can we use vape mods for wax?
Yes, of course, you can smoke wax in a vape. You have to just turn your CBD products wax into e-liquid. Unfortunately, melting wax in the first attempt will never give you 100% liquid so you have to do trial an error method to get the liquid from wax for vaping.
How to vape wax?
You can do this in one of three ways:
- Place a coffee filter over the top of the container and just give it time.
- Place the container in a warm water bath to speed the process.
- If you’re really impatient (like we are), you can put the water bath on the stove at low to medium heat until you see liquid start to evaporate. ...
How do I turn my vape wax on?
Vaping Wax: Once you press the power button, the wax should start melting. It will vaporize right away so make sure to have the mouthpiece on. When you first start, make sure to prime the wick. When you dab your wax on, hit the button for 2 seconds and let it melt onto the coil.
How long do Pulsar APX wax coils last?
The Pulsar APX Wax features a standard 1100 mAH lithium ion battery which gives users a solid ninety minutes of non-stop usage. Users should bear in mind that the device is meant to be used sporadically since it is geared for heavy hits.
How do I use a APX bubbler?
Usage and Filling Instructions To fill the bubbler, slowly pour water into the top to about 1/3 the way up the center percolator. Install the bubbler the same way as the standard mouthpiece. Power on the device, and enjoy a smooth, cool vapor!
How long does APX vape last?
around 90 minutesPulsar APX 2 Portability and Vaping Capabilities The Pulsar APX 2 has pretty good battery life at around 90 minutes making it a portable option for most day trips. The battery is not replaceable though so you probably won't take it on longer trips where you'll be away from a charging base for more than the day.
How do you clean APX wax coils?
These steps can be performed while the mouthpiece is soaking.Make sure the vape unit is turned off and the heating coil element is cool.Use an alcohol filled cotton swab or lightly dip a dry cleaning swab in 91% isopropyl alcohol.Use the swab to wipe the inside of the coil chamber until clean.More items...•
When should I change my wax pen coil?
Generally you need to change coils every 1 to 4 weeks of usage. If you vape very frequently, you may find that your coil only lasts for between five and seven days.
Can you put water in a vape?
Vape devices, such as the Kind Pen e-cigs [or a similar device], were not designed to hold water. The O-rings on the vape tanks can potentially fail, causing water to leak inside the vape battery and render it useless…. so you definitely won't get the results you're after, and you'll be on the market for a new e-cig.
How do you use a glass globe wax atomizer?
Place the desired amount of wax directly onto the flat surface in the center of the atomizer using your dab tool. Make sure your material is in contact with the coil as much as possible. Be careful and do not overpack or the wax can spill out. Return the glass globe to cover the coil and again, be gentle.
How do you fill a mini dive bubbler?
Use a funnel and place the funnel on top of the Yocan Dive Mini Replacement Glass Attachment's mouthpiece. Slowly fill it with water, about halfway through the Yocan Dive Mini Replacement Glass Attachment. Remove the funnel.
How do I turn off my APX vape?
The Pulsar APX V2 has an easy-to-use one-button operating system. You'll find this button on the unit's side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.
What is APX vape?
The new and improved APX Vape V3 combines portability with a maximized herb chamber to create an unmatched vaping experience. With just a 30 second heat time, this dry herb vaporizer is efficient with a "Cash" feature that ensures the last of your product is spent or for taking quick hits with high heat.
Is Pulsar APX convection or conduction?
The APX V2 uses a sophisticated combination oven that utilizes both convection and conduction in a hybrid setup. It provides the best of both worlds. Showcased by the exceptional 30 second heat-up time with the maximum temperature of 428°F.
How to clean quartz coils?
The quartz coils should be cleaned using a q-tip dipped in isopropyl alcohol. The same goes for the glass mouthpiece, just wipe down the inside of it if any residue starts to build-up.
Is APX wax a good vape?
General Design: The APX Wax has a pretty standard vape mod design, only it’s a whole lot smaller. It’s a pretty simple device that only uses one button and only has one voltage setting, so it’s a good choice for beginners, or for anyone who likes quick and dirty session. It has four LED lights on the front that indicate the battery level, which is a nice, useful touch.
Does the APX wax get hot?
Since hits are short and sharp with this vaporizer, it doesn’t really have much time to get too hot while you hold it.
How to know when it's time to vape Pulsar APX V2?
After 30 seconds, you’ll feel a vibration letting you know it’s time to vape.
How to improve Pulsar APX V2?
To improve the longevity of your Pulsar APX V2, please clean your loading chamber after every session. Be sure to use the provided cleaning brush to get rid of all the debris in the chamber.
How long does it take to charge a Pulsar APX V2?
You should get about 5-6 vaping cycles on a fully charged Pulsar APX V2. It also takes roughly 90 minutes to charge a Pulsar APX V2 from 0 to 100 percent (excluding the initial charge).
What is Pulsar APX V2?
But don’t let all these bells & whistles bewilder you. The Pulsar APX V2 is highly intuitive and ideal for beginner vapers.
How to change the temperature on a vaporizer?
To change the temperature setting on this vaporizer, hold the main button for about two seconds. Keep cycling through temp options until the one you want lights up on the LED screen.
How long should you leave a pulsar in between vaping?
Although it’s not required, Pulsar recommends pausing for at least five seconds in-between each inhale. This will give the unit plenty of time to re-heat for a smoother vaping experience.
Where is the Pulsar APX V2 button?
The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen.
How to store wax in a vaporizer?
When it comes time to use the wax, you will need a dab tool to scoop it out of the container and into the vaporizer. Nearly every wax vaporizer includes a dab tool so you never really need to worry about getting one. However, you can always buy an extra one so that you never have to worry about losing the one included in the kit.
What are the two types of wax vaporizers?
There are two main types of Wax vaporizers- Vape Pens and E-Nails.
What type of atomizer do vape pens use?
As stated earlier, there are three possible types of atomizers that vape pens can use. Most have one, but some include two. No matter what type of atomizer your vape pen uses, it is loaded the same way; you dab your wax onto the atomizer and then replace the mouthpiece. It should be noted that vape pens with quartz and ceramic coils are easier to load than those with quartz rod coils. So if you want to have an easier time, try a vape pen like the KandyPens Crystal ( Review | Buy) that has a quartz coil.
How many settings does a vape pen have?
Vape pens usually have three or four settings to choose from. Many e-nails have precise temperature selection so you can choose the exact temperature that you need. Some e-nails, like the Dr Dabber Boost ( Review | Buy) have a temperature range rather than precise temperature control, but you will get precise control in most e-nails.
How big should a dab of wax be?
Your dab of wax should be about the size of a rice grain, which is enough for a complete session.
How to dab wax on a portable nail?
In the case of e-nails and portable rigs, you turn on the device, select a temperature, and then dab the wax once it has reached the selected temperature.
What is TVG vape?
TVG is a small team of cannabis and vaping enthusiasts that came together to create a vaping guide that 's accessible for everyone. Over the past seven years, we have collectively tested hundreds of vapes for performance, build and vapor quality, as well as ease of use and overall value.
Kit and Accessories
- Pulsar APX Wax
- Borosilicate glass mouthpiece
- Dab tool + silicone wax container
- USB charging cable
Design and Features
- General Design: The APX Wax has a pretty standard vape mod design, only it’s a whole lot smaller. It’s a pretty simple device that only uses one button and only has one voltage setting, so it’s a good choice for beginners, or for anyone who likes quick and dirty session. It has four LED lights on the front that indicate the battery level, which is a nice, useful touch. Portability: This is easily …
How to Use
- Remove the glass mouthpiece, dab your wax onto the coils, and then replace the mouthpiece.
- Press the power button five times to turn on the device.
- Hold down the power button to initiate heating.
- Inhale from the mouthpiece while holding down the power button.
Performance and Vapor Quality
- Vaporizer Performance: The heat time of the APX Wax is practically instantaneous, so you can take a hit whenever you want without any preamble. Since hits are short and sharp with this vaporizer, it doesn’t really have much time to get too hot while you hold it. Vapor Quality: I don’t know what the default voltage setting is on this vape, but it seems to be calibrated to deliver pret…