When using original APX Model with Dry Herbs: Grind your herbs finely, or prepare your wax by collecting a small amount with the included dabbing tool. With the device turned off, snap off the mouthpiece to access the screen and ceramic chamber. Fill the oven with dry herbs, or insert the wax chamber and fill it with concentrates.
Full Answer
How to use a pulsar APX V2 dry herb vaporizer?
Be sure to use the provided cleaning brush to get rid of all the debris in the chamber. The Pulsar APX V2 has an easy-to-use one-button operating system. You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds.
What is the new APX vape V3?
The new and improved APX Vape V3 combines portability with a maximized herb chamber to create an unmatched vaping experience. With just a 30 second heat time, this dry herb vaporizer is efficient with a "Cash" feature that ensures the last of your product is spent or for taking quick hits with high heat.
Is the APX smoker a vaporizer?
* The APX Smoker uses a combustion style heating element and is not a vaporizer. Need replacement atomizers? Get them here. Disclaimer Legal herbal use only, NOT for tobacco.
How do you turn on a dry herb vaporizer?
You’ll find this button on the unit’s side directly above the LED screen. To turn this dry herb vaporizer on and off, hit the main button five times within two seconds. Once the vaporizer is on, you will see the LED screen light up with the current battery life and one of the five temperature options.
How do you use APX dry herb vape?
0:402:02Pulsar APX V2 Vaporizer Tutorial & Unboxing - Tools420 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe pulsar a px vaporizer is pretty easy to use turn the unit on press the on button five times andMoreThe pulsar a px vaporizer is pretty easy to use turn the unit on press the on button five times and repeat the same to turn the unit off to load the unit take the top mouthpiece off note.
How does the APX vape work?
0:574:39APX Vape & APX Smoker Review - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the a px vape is really simple I went ahead and turn mine on right now and set 392 degreesMoreSo the a px vape is really simple I went ahead and turn mine on right now and set 392 degrees Fahrenheit. One two three four five clicks will turn it on and off.
How long does APX vape last?
Pulsar APX 2 Portability and Vaping Capabilities The Pulsar APX 2 has pretty good battery life at around 90 minutes making it a portable option for most day trips. The battery is not replaceable though so you probably won't take it on longer trips where you'll be away from a charging base for more than the day.
How do I use a APX v3?
How to useRemove the mouthpiece to expose the herb chamber, fill it with herb, and then replace the mouthpiece.Press the power button five times to turn on the device.Hold down the power button for three seconds to cycle through the temperature settings and release it once it lands on the setting you want.More items...
How do you turn on a apex vape pen?
How to turn on/off a vape pen?Press the button rapidly 5 times.Notice the light on the button flashing.The battery is now activated, you can push and hold the button as you're inhale your vape.Rapidly click the button 5 times to turn the battery off.
Are dry herb vaporizers safe?
The question is: are dry herb vaporizers bad for your health? The short answer is no and the long answer is absolutely not, there are zero health risks. Dry herb vaping uses conduction heating methods to eliminate the production of carbon monoxide, a dangerous by-product of traditional smoking.
How do I know when my vape is done?
It is a sign that you are running out of vape liquid if your unit produces lesser and tasteless vapor. It's a far cry from the creamy puffs that you used to inhale when your vape was new. In other words, your puff isn't so satisfying anymore.
How do I know when my herb is done vaping?
If the vaped bud is brown, brittle, and very crumbly, then it is done, and it's not efficient to keep vaping it. If you still see areas that are green, and nothing too dark brown or black, you can definitely vape it further and get some more mileage out of it.
How long should a vape session last?
Generally, 15 to 30 seconds are enough before you take another hit, but you can wait longer, especially if you are experiencing dry hits more often. It can be hard to get used to, especially if you're previously a smoker which doesn't require you to wait for anything.
How do you use vape wax?
How do you hit a wax pen? Hitting a wax pen is similar to the same as hitting a dab pen. You'll need to access the pen's heating chamber and place the amount of concentrate you'd like to vaporize onto vaporize, onto the coil or wick. Reattach the chamber, or mouthpiece, and set your temperature or voltage.
How do I clean my APX Volt?
Pour enough isopropyl alcohol into a soaking container to cover the glass or metal mouthpiece.Place the mouthpiece in the container with isopropyl alcohol for one hour.Remove and wipe with a cleaning wipe.Rinse in cold water and dry with a hand towel or paper towel.
How do you use a pulsar shift?
1:373:55Grindhouse Shift Vaporizer Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe grindhouse shift vaporizer has precise temperature control which you can adjust to theMoreThe grindhouse shift vaporizer has precise temperature control which you can adjust to the individual degree by pressing the up and down buttons on the front of the unit.
How to know when it's time to vape Pulsar APX V2?
After 30 seconds, you’ll feel a vibration letting you know it’s time to vape.
How much herb can a Pulsar APX hold?
Yes, that’s all there is to it! The Pulsar APX V2’s ceramic chamber measures 10 x 16mm and can hold about 0.35 grams of dried herb. For the best results, Pulsar recommends loosely packing your herbs.
How to change the temperature on a vaporizer?
To change the temperature setting on this vaporizer, hold the main button for about two seconds. Keep cycling through temp options until the one you want lights up on the LED screen.
How hot is Pulsar APX V2?
Here are the five temperatures you could choose from on your Pulsar APX V2: 356° F. 374° F . 392° F. 410° F. 428° F. Although it’s not required, Pulsar recommends pausing for at least five seconds in-between each inhale. This will give the unit plenty of time to re-heat for a smoother vaping experience.
How many firing buttons does the APX have?
The APX has only one firing button, and it also lets the user cycle through all the temperature settings, which are all inscribed into the spine of the mod. Hold the trigger for three seconds to select each successive temperature level.
How to use Pulsar Apx V2?
The first thing is to grind the herb, making sure it is ground finely and uniformly for best results. Once ground it is ready to pack. Remove the mouthpiece and place the herb to the fill line.
What is Pulsar APX?
The Pulsar APX is a portable, hand-held dry herb vaporizer that travels well since it stands at just over four inches. It has a sturdy, hard-body casing ensuring its durability. The parts that make up the Pulsar APX disassemble smoothly enough to allow for easing loading into the convection ceramic chamber, which is a preferred dry herb setup, at least, compared to cartridge-based systems.
How to inhale a herb?
Remove the mouthpiece and place the herb to the fill line. Do not pack it too tightly, or it will not burn evenly. Replace the mouthpiece, click the fire button five times, then hold the button for three seconds to cycle through the menu to choose the preferred temperature. Then hold the fire button and inhale. Done!
Is Crafty Vaporizer better than APX?
The Crafty is a more expensive device than APX. The outer case of the product is made of a rigid plastic material, and most of the product is vented, which means it resembles a heat sink.
Is Firefly 2 a vaporizer?
It is a fast device and is available in 8 different colors, such as macadamia, blue, black and white etc. Though it is not at all intuitive to use for a new vaper.
Is Pulsar APX a ceramic vape?
So, the Pulsar APX is a straightforward, uncomplicated device that loads easily, and gets ready to go in under a minute.
Why do you need to vape all the herbs in the oven?
You need to vape all the herb in the oven during that session because attempting to use one oven over multiple sessions will not work. That is because, even after you power down the vaporizer, the oven will retain some heat and continue heating the herb and possibly burn it.
How to burn off a vape?
To perform a burnoff session: (1) Make sure that the oven of your vaporizer is empty. (2) Turn on your vaporizer. (3) Set it to the highest temperature.
What is TVG vape?
TVG is a small team of cannabis and vaping enthusiasts that came together to create a vaping guide that 's accessible for everyone. Over the past seven years, we have collectively tested hundreds of vapes for performance, build and vapor quality, as well as ease of use and overall value.
What kind of batteries do weed vapes use?
Weed vapes typically use 18650 batteries ( view on Amazon ), but a few, like the DaVinci Miqro ( Review | Buy ), use 18350 batteries instead.
How long should you inhale before vaping?
You should start with long, slow inhales of about seven to ten seconds at a time before exhaling.
Can you reheat herbs in the oven?
Reheating the herb inside the chamber makes that even worse, which means that you could end up with ashy tasting herb. So if you want to avoid that—and you do, then make sure to vape all of the herb in your oven during your session. STEP 2.
Can you use a dry herb vaporizer blindly?
The majority of dry herb vaporizers are very easy to use but that doesn’t mean that you can just start using them blindly. You need to check the instruction manual first and foremost so that you are familiar with how your weed vape operates.
How to clean 510 threading on a vape?
Use the swab to wipe the inside of the coil chamber until clean. Unthread and remove the coil from the vape body. Use the cleaning swab to wipe the 510 threading of the vape body. Re-assemble vaporizer and dry-fire before use.
How to clean a vape coil?
Make sure the vape unit is turned off and the heating coil element is cool. Use an alcohol-filled cotton swab or lightly dip a dry cotton swab in 91% isopropyl alcohol. Use the swab to wipe the inside of the coil chamber until clean. Unthread and remove the coil from the vape body.
How to clean a mouthpiece?
Place the mouthpiece in the container with isopropyl alcohol for one hour. Remove and wipe with a cleaning wipe. Rinse in cold water and dry with a hand towel or paper towel. Cleaning the coil chamber - These steps can be performed while the mouthpiece is soaking.
How to clean a vaporizer chamber?
The best way to clean the chamber is with an alcohol-filled cotton swab. These steps can be performed while the mouthpieces are soaking. Ensure vaporizer is turned off and fully cooled prior to cleaning. Snap the stem of the cotton swab to release the isopropyl alcohol into the cleaning tips. Alternatively dip a dry cotton swab into ...
How long to soak silicone mouthpiece?
Separate the silicone liner from the plastic mouthpiece and place them in the soaking container for one hour.
How long to dry fire a vaporizer?
Swirl the cotton swab tip around all surfaces of the heating chamber and surrounding areas to remove resin and other residues. Let the vaporizer sit for 3 minutes and then dry-fire by turning it on to the highest heat setting. The heat will evaporate any remaining alcohol residue.
How to clean a coilless heating element?
Rinse in cold water and dry with a hand towel or paper towel. Cleaning the coil chamber - Since the heating element uses a coil-less heating pad, there is no worry of having to avoid touching exposed heating coils. These steps can be performed while the mouthpiece is soaking.
First Impressions
Using The Pulsar APX
- The Pulsar APX is simple to load. The plastic mouthpiece comes off with a quick tug and underneath one will find the chamber. It has a wide mouth, so loading it does not lead to too much spillage. It is always best to get the material as fine as possible, but luckily, the Pulsar has a screen at the bottom of the chamber that stops any of the finely...
Difference Between Pulsar APX and APX V2
- Pulsar APX V2 is an upgraded version of Pulsar APX. It is a great choice for newcomers to dry herb vaping looking for an easy and effective way to start vaping. Experienced vapers will enjoy the no-frills and low tech approach when looking for a simple vape. The Pulsar APX V2 features almost everything people love about the Pulsar APX into a much compact package with an impr…
Similar Products on The Market
- Crafty Vaporizer
Crafty Vaporizeris a nice little on the go mod for dry herbs, but battery life and not much temperature control make it not ideal. The Crafty is a more expensive device than APX. The outer case of the product is made of a rigid plastic material, and most of the product is vented, which … - Firefly 2 Vaporizer
Firefly 2 Vaporizeris much more expensive dry herb vaporizer than Pulsar APX. It is a fast device and is available in 8 different colors, such as macadamia, blue, black and white etc. Though it is not at all intuitive to use for a new vaper.
Is The Pulsar APX V2 A Good Vaporizer?
- Pulsar APX is a tough little device that is easy to use and has a powerful Li-ion battery to keep it going. The design on it is spectacular. It is the right amount of catchiness without being too attention-grabbing. The temperature control works well enough to allow for a specific taste to emerge along with great-looking clouds. The thing is super easy to load and cleaning it is easy e…