Full Answer
How do you know if your vape coil needs changing?
That’s why you also need to pay attention to any of these signs that your vape coil needs changing. 1. Burning Taste If you’re experiencing a burnt taste when you’re vaping, then there’s a possibility that you’re vaping a dead coil.
How to stop vape coils from burning?
The best ways to stop your coil from burning are: 1 Prime your coils 2 Stop chain vaping 3 Reduce power settings 4 Keep your vape tank topped up 5 Use an e-liquid with more PG 6 Try an e-liquid with less sweetener 7 Use temperature control 8 Use smart mode 9 Use auto-priming technology
Why do vape coils evaporate when you fill them up?
Whenever you fill one of your vape tanks with e-liquid, the wicking material in the coil’s head absorbs the juice. This wick surrounds the element, which usually heats up when current passes through it, causing the e-liquid to evaporate.
Why does my vape smell burnt?
Without liquid to vaporize, the coils start burning the wick, and the user essentially inhales burnt cotton. Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast.
How do you know if you burnt your vape coil?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
What happens when vape coil burns?
If you're experiencing more burnt hits than not, it's a sign that you need to replace your coil. Prolonged vaping using the same coil will eventually wear out the wick, which evaporates your e-liquid to create vapour, causing that nasty burnt taste.
How long does it take for a coil to burn out in a vape?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Why is my vape burning up coils?
It's called a dry hit, and it happens when the coil inside your vaping device is not properly saturated with e-liquid, which causes the coil to overheat and singe the wicking material.
How long should a coil last?
between one to two weeksA new coil should last between one to two weeks. However, most e-liquids leave a thin layer of residue when they are vaporized. This builds up around your coils and wicks and can end up clogging your device in the long run.
Why is my coil burning after 1 day?
Ensure Your Tank Is Properly Filled While this might seem obvious, the first port of call when your coil is burning is to ensure that it is properly saturated with e-liquid. Allowing your tank to run on empty while still vaping will inevitably cause dry burn, which can permanently damage the coil.
How long should you wait between vape hits?
15 to 30 secondsDon't Chain Vape You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait. In this case, you can buy e-juice with a higher nicotine level.
Will one dry hit ruin a coil?
Ever. When a dry hit occurs, it can ruin your taste for the day, irritate your throat, and it will almost certainly ruin your coil head.
Why does my coil taste burnt after 2 days?
It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.
What does a burnt coil taste like?
The coil is what delivers the vapor, so if it's bad, the liquid will not taste right. Kind of like charred marshmallows if you have a sweeter flavor, or like burnt paper for the more savory or tobacco flavors. Don't worry, this taste is the only real effect of a burnt coil.
Can I rinse my vape coil with water?
Letting dirty coils soak and having water pass through them will remove some of the residue, but not all of it. And on top of that, you will need to wait for water to fully evaporate, which may take a while. If you still want to clean your coil heads, then you can follow the old soak and rinse method.
How long should new coils soak?
around 5-10 minutesIt's always recommended to leave your coil to prime for as long as possible - anywhere between 5-30 minutes. The longer you leave it the better, but most coils should be ready to vape after around 5-10 minutes.
How to avoid burnt coils in vape?
To avoid the burnt coil, keep checking your tank and top it up when it is at a third of its capacity. 2. Chain Vaping.
Why does my vape coil burn out?
6 Common Reasons Why Vape Coils Burn Out – and How to Avoid It! 1. Not Enough Vape Juice in the Tank. Whenever your wick is dry, it will not function properly. As mentioned, the wick needs to be saturated in vape juice. In case you vape frequently, then your tank will start to run empty and the wick will not soak up as much ...
What happens when you vape with a wick?
This wick surrounds the element which usually heats up the moment current passes through it, causing the vape juice to evaporate. Once evaporation occurs, the vaper can inhale the vapor that’s produced. However, if the wick wasn’t primed properly before you took your first puff, you’ll experience a burnt taste.
What happens if you use a coil that isn't high grade?
If you do so with a coil that isn’t high-grade, the wick won’t be able to handle the heat these wattages will generate and will end up burning. The solution to this is to simply reduce your power setting and find out the ideal wattage you should vape at.
What happens when you vape multiple puffs?
This causes the wick to burn.
Why is it important to take care of your coil?
While preventing your from burning out seems like a lot of work, it’s worth it because it helps you avoid losses. It also saves you the trouble of experiencing an irritating burnt taste. Taking care of your coil could mean the difference between an enjoyable vaping experience or a terrible one.
Can you use a lot of sweetener in vape juice?
Using a Vape Juice with a Lot of Sweeteners. Vape juices that contain a lot of sweeteners can cause gunking up of coils. While they may be delicious, they could significantly destroy your coils. When gunking happens, the wick will be unable to soak up more juice so when you vape, the coil could get burnt.
How to know when your coil is done?
Knowing when your coil is done is not a science, but it is a learning process. The more you use a vape tank, the more aware you become of the time you need to grab a new coil out of the box. The first sign will usually be a loss of flavor, followed by a drop in vapor production.
What to do if your coil is burnt?
Don’t be discouraged. Vaping is an enjoyable safer alternative to smoking. If your current coil tastes burnt, grab a new one and discard the bad one. Just don’t forget to prime it first!
How long does a coil last?
Consumption. A coil is generally good for up to a certain amount of e-juice. The more you use it, the faster it dies. Coil life is sometimes calculated in days or weeks, but the most accurate way to calculate it is in mL—some people vape only a couple of mL per day, while others will consume 10-20 mL or more.
How to start vaping on a pod?
When you first begin vaping on a pod, try and take shorter puffs to begin with. Some of the smaller coils need to be broken in a bit before being pushed. If you take really long hits to start, even if the wick is fully saturated, you could get a burnt hit.
How to prime a vape tank?
How to prime vape tank coils. All vape tanks that come with replaceable coil heads have more or less the same structure and require the same simple steps to get primed. You will need to repeat this process every time you replace a coil. Take a new coil out of the box.
Why does my e-liquid burn?
Here are some of the most common reasons behind burnt hits and some advice to help you avoid them. High wattages. Vaping at wattages that exceed the coil limits will vaporize e-liquid too fast. When that happens, the coils can burn the wicks, even when there’s still some juice there.
How to keep vape wick from drying up?
Always stay inside the recommended wattage ranges. Chain vaping. When taking many puffs in a row, the wick will dry up fast. If you sense that a burnt hit is coming, by noticing a slightly roasted taste, put your vape down for a moment. This will allow liquid to cover the dry spots of the wick.
What are the components of e-liquid?
Two of the base components of e-liquid are Vegetable Glycerine (VG) and Propylene Glycol (PG). VG has a high viscosity, which makes it slower to saturate the coil. PG has a low viscosity, like water, so it saturates the coil quickly.
Can sweeteners shorten the life of a vape coil?
While added sweeteners can do wonders for replicating the flavour of our favourite fruits and baked goods, they do noticeably shorten the life of your coil, especially in larger quantities. As you vape, the sweetener in the e-liquid may leave residue on the coil.
Do coils last longer?
However, there are some ways to avoid dry hits for good and make your co ils last longer.
Does e-liquid have sweetener?
Many e-liquids even contain no sweetener to extend coil lifespan. The best way to find an e-liquid with low sweetener is to ask for advice at your local vape store, or online communities of vapers, who are always happy to help beginners.
What is a Vape Coil?
The coil is arguably the most important component of any vaping device. The coil is connected directly to the battery of your device and when activated, heats the E-Liquid to produce vapour.
How Often Should You Change Your Vape Coil?
A brand new coil should last for up to two weeks. This is because the E-Liquid tends to leave a thin layer of residue on the coil when it’s been vaporised.
Signs You Should Change Your Vape Coil
While we’ve given you a recommended time frame of how often you should be changing your vape coil, this can vary from device to device for a variety of factors such as:
Why do vape coils have cotton?
Most vape coils are made with cotton because it's perfect for soaking up e-juice and holds it really well while still allowing air to be drawn through. However, if you haven't vaped for a while or you're just switching to a new liquid or coil, the cotton can be extremely dry. By soaking the wick in e-juice before you start vaping, you'll eliminate any risk of that dreaded 'dry hit' This is as true for those using traditional cartomizers as it is for those with newer mods. The trick is let your e-juice sit in the tank for a good 5-10 minutes at least before you take your first hit.
How does high wattage vape work?
High wattages allow you to burn through e-juice at twice the speed. It may offer bigger and better clouds, but at the cost of longevity - your vape sessions won't last as long. Once the e-juice runs out the wick will dry and result in a dry hit. It may not be popular with the cloud chasers, but if you want a longer vape sesh and want to cut down the risk of burning your vape coil, turning down the wattage is the way to.
Why is it important to use high VG juice?
This is particularly important when using a high VG juice because it takes these longer to soak into your coil in between each drag.
Can you mix PG and VG in e-juice?
Typically, you'll see a mixture of PG and VG in any kind of e-juice. The higher the VG content, the thicker the liquid and the longer it takes to soak the coil between draws. That means that if you like vaping quickly you might burn out your coil quicker with a high VG liquid.
How to stop coils from burning?
The best ways to stop your coil from burning are: 1 Prime your coils 2 Stop chain vaping 3 Reduce power settings 4 Keep your vape tank topped up 5 Use an e-liquid with more PG 6 Try an e-liquid with less sweetener 7 Use temperature control 8 Use smart mode 9 Use auto-priming technology
Why does my coil taste burnt?
Given that we know that burnt coils can produce harmful chemicals , you should probably still change it. Occasionally, you’ll also get a burnt taste when you have just replaced a burnt out coil.
Why is my coil head not soaking up?
On many coil heads, the juice has to be at a certain level to even reach the wicking ports. When less of the juice is in contact with the wick, it doesn’t get soaked up as quickly. When your juice level is really low, this can cause problems very easily. The simplest solution to this is to keep your tank topped up.
How does a fire button work?
When you hit the fire button, electricity flows through your coil and it gets hot. The heat given off by the coil is taken up by the e-juice, which is soaked into the wick, and it turns the juice into vapour.
What is TC vaping?
Temperature control (TC) vaping solves the problems with burning wicks more directly. By tracking the detectable changes in resistance that occur when certain coil materials are heated up, TC devices such as the Geekvape Aegis Max Zeus allow you to set a maximum temperature for your coil.
How long does it take for a wick to dry out?
If you do this, though, you have to leave it for 24 hours (or longer) to completely dry out before you use it again.
What happens when you vaporize a wick?
When the juice in the wick has been vaporised, the wick dries out a little. However, you have a tank full of e-juice surrounding the coil, and this is constantly replacing the juice in the wick. This means that by the time you go to take another puff, the wick is soaked again and everything works as it should.
