4 Key Tips on Taking Care of Your Vape Mods
- • Clean your vape mods as frequent as possible.. Every electronic device needs to be clean once in a while. A good wipe...
- • Don’t forget to charge your vape mods.. The proper way of charging your vape mods is to make sure that you charge the...
- • Take care of your vape mods.. Another tip is to buy a protective carrying case...
Full Answer
How clean do vape mods need to be?
The mod itself will be clean including all the buttons, the connections will be wiped down from juice and dirt residue, and the mouthpiece should be free of any build-up. All vaping setups require regular maintenance in the form of cleaning, and there’s no way around that.
How does a box mod vape work?
The working principle of a box mod vape is similar to that of other vaporizers; the battery is used to heat up a coil located inside an atomizer which is separate from the box mod. Vapor is produced once the coils are heated. Why Do People Love Box Mods?
How do I maintain my vaping kit?
All vaping setups require regular maintenance in the form of cleaning, and there’s no way around that. If you want your kit to continue to give you vaping satisfaction, practice safe vaping habits and perform routine cleaning sessions.
Can You disassemble and reassemble your vape mods without hiccups?
Fortunately, there are some good tips and ideas that will help you properly disassemble and reassemble your vape mods with no hiccups. This is particularly useful if your vape mod stops working suddenly.
How do you take care of a vape mod?
In that case, you can follow these steps for deeper cleaning.Remove wicks from coils.Dry burn your coils lightly (don't let them glow too much)Remove atomizer from your mod.Place under running water.Brush them lightly with a toothbrush or a coil cleaning tool.Rinse once again.More items...•
How do you clean a vape mod box?
How to Clean a Vape TankFill a bowl with warm water.Detach tank from mod.Dispose of any e-liquid remaining in the tank.Completely disassemble your tank.Place tank components into bowl.Wash tank components in water until clean. ... Dry off each component with a paper towel.Let stand and air dry for 10-15 minutes.More items...•
How do you maintain a Mod?
Put a small amount of isopropyl alcohol on your microfiber cloth (do NOT use alcohol on rubberized finishes) and wipe down the entire body of your mod, making sure to pay extra close attention to areas where grime or dirt can build up, like where you commonly touch the vaporizer when it is gripped in your hand.
How do I take care of my vape?
Looking After Your E-Cig & Vape BatteriesClean the Battery Contacts Regularly.Keep Batteries Out of Sunlight & Extreme Temperatures.Mark Your Batteries So You Know When To Replace.Don't Overcharge Your Batteries.Store Your E-Cig Batteries Carefully.Turn Off When not In Use (Not Applicable to Cigalike Kits)More items...
Can I put water in my vape tank?
The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.
How often should I clean my vape?
Cleaning your vape doesn't have to be as time consuming as you might imagine it to be. It should be cleaned at least every month, but regular users should clean it more often, as much as once per week.
How long do vape Mods last?
In conclusion, the average device will last you around about 6 to 7 months. Obviously, this will depend a lot on the type of products that you use, the length of time that you use your device for each day, and the overall build quality of what you're using.
When should I replace my vape mod?
Depending on how much you vape, it may need changed as often as once a week or as infrequently as once a month. Using your vape more frequently means you'll need to change the coil more often, but even if you rarely vape, your coil will still need to be replaced at least once a month.
How do you clean the inside of a Mod?
A Q-tip soaked in a bit of rubbing alcohol tends to clean the larger surfaces quite nicely, and dries quickly. They're also great for cleaning those hard to reach nooks and crannies, places where a towel falls short.
Where should I store my vape?
When vape juice is exposed to heat, air, or light, it decays faster than it needs to. This is why you should make a point to keep your e-liquid in a dark, cool place. While a cabinet or drawer that's kept at room temperature will suffice, many vapers choose to keep their e-liquids in a refrigerator or freezer.
Should I keep my vape upright?
Make sure to keep the vape pen upright. A vape pen can leak if placed on its side or upside-down. Dust and dirt can also easily get into the device by placing it upside down or on its side. This will reduce the risk of your device getting damaged and keep it clean.
How do I store my vape overnight?
If you leave your ecig on its side or upside down, the eliquid can travel toward these holes and will eventually leak.Store ecig upright. This will help avoid flooding the airspace.Store away from water.Keep away from direct sunlight.Keep away from high temperatures.
What causes the pod mod to get stuck?
Now, let’s clean the chassis of your pod mod. Debris can cause the buttons to eventually become stuck, which means the end of your pod mod.
How to clean a pod?
Step #1: Take apart your pod system. Most open pod systems consist of two components: the pod cartridge and the pod mod. If your kit has more separate parts, take those apart as well.
Why do pod kits need less maintenance?
Because there are fewer parts, and because a pod kit is smaller than a box mod kit, less cleaning needs to be done in order to keep it in good working order. However, that doesn’t mean that pod mod systems don’t require regular maintenance just like sub-ohm systems do.
How to clean a battery cartridge?
Step #2: Take a cotton swab and dip it into some rubbing alcohol. Then, gently but thoroughly wipe down the connections on both the battery and the cartridge. Step #3: Next, use your cotton swab to clean the connections ...
Do you need to clean your pod mods?
All vaping setups require regular maintenance in the form of cleaning, and there’s no way around that. If you want your kit to continue to give you vaping satisfaction, practice safe vaping habits and perform routine cleaning sessions. Use this guide to clean your pod mod system properly so that you can continue enjoying it to its fullest potential.
Can you move a mod onto a pod?
Once you’re done cleaning the mod itself, you can move onto the pod cartridge.
Can you put an open pod back together?
Now, you can put your open pod system back together and enjoy using it once again. We suggest following this step-by-step process on a weekly basis in order to ensure that your system is always in good, clean shape. After following the above steps, your pod mod should be completely clean.
Cleaning The Connections
Cleaning The Base
- Now, let’s clean the chassis of your pod mod. Debris can cause the buttons to eventually become stuck, which means the end of your pod mod. Step #4: If your pod mod has buttons, check to make sure that the perimeter of those buttons is clear of debris. If it’s not, try using a toothpick or another very small, sharp object to carefully dislodge debris. Step #5:Once you’ve taken care of t…
Cleaning The Pod Cartridge
- Once you’re done cleaning the mod itself, you can move onto the pod cartridge. Step #6: Start by emptying your pod cartridge. Try to pour as much juice out as possible. Step #7:Fill it with warm water, give it a quick shake, and dump it out. This will clear out any debris leftover from the last e-liquid.
Cleaning The Mouthpiece
- Step #8: If your pod system has a separate mouthpiece or drip tip, remove that and run lukewarm water through it. Now, look inside. If you can see debris or juice gunk, take a cotton swab or toothpick and carefully dislodge what’s inside.
Wrapping It Up
- Now, you can put your open pod system back together and enjoy using it once again. We suggest following this step-by-step process on a weekly basis in order to ensure that your system is always in good, clean shape. After following the above steps, your pod mod should be completely clean. The mod itself will be clean including all the buttons, the connections will be wiped down …