How do I reset my Smok vape? Reset the tank – You can ‘reset’ the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do I Turn on/off my Smok vape?
First, locate your device’s main fire button, which also functions as the power on/off button. Most SMOK vapes have just a single button, sometimes two or three.
How do I perform a smok factory reset?
Learning how to perform a SMOK factory reset for Alien, ProColor, Priv V8, and other mods’ tanks is a handy skill to have. First, altogether remove the tank from the mod, making sure its screws are tightly fastened. Press the fire button, then reattach the tank. Choose “n” when the device asks if you are using a new coil.
How to fix Smok error messages on a vape?
Try screwing your tank in a little bit tighter and clearing off any dust from the 510 connection and the connection point. “Short Atomizer” or “Don’t Abuse Protects” Seeing either of these SMOK error messages is a big red flag, and you should immediately stop vaping for your safety.
How can Smok help you upgrade your vape?
A SMOK representative may be able to assist you with tasks like updating firmware and can usually look up your product information to provide warranty details if applicable. Browse Cutting-Edge SMOK Mods to Upgrade Your Vape Experience VaporFi has an extensive selection of premium devices from SMOKthat you’re sure to love.
Why is my SMOK vape not working?
SMOK Vape Won't Turn On If your SMOK vape isn't turning on, it could be a quick fix: Try charging your mod to see if a dead battery is an issue. Plug it into the charger and hope that you forget to recharge after your last use. Check the battery to confirm that it's properly inserted.
How do I reset my SMOK 4?
Here's how to operate the Device: Device On/Off – Press fire button 5 times in 2 seconds. Puff Reset – Number of puffs will reset when you reach 999.
Why is my SMOK not firing?
If you've verified the device is fully charged and is still not firing, try changing the coil inside the pod. A dead or dud coil may not be making proper connection with the battery and causing the device to not fire.
Why has my vape just stopped working?
There could be something blocking the connection between the battery and the clearomiser. Try cleaning the battery terminal and end of your clearomiser with a cotton bud. Another thing to check is that the tank or clearomiser is making contact with the battery terminal.
How do I reset my Smok Nord 4 puff?
The puff counter only goes up to 999 then it resets to 0 or you can reset it manually by pressing the down wattage button and the fire button together.
Why is my SMOK vape blinking white?
Short circuit protection: if a load short circuit is detected, the white LED light will flash 4 times and the battery will automatically shut down the output.
Why is my Smok vape blinking 4 times?
If the LED blinks four times when you press the fire button, there is a problem with the connected atomizer coil. Either the coil has a short circuit, or the resistance of the coil is outside the device's supported range. Either way, the remedy is the same; you should discard the coil and install a new one.
Why is my vape flashing and not working?
The most common ones being: Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.
How do you unlock a Smok vape?
0:100:48SMOK G-Priv 2 - How to Lock and Unlock the Firekey (Fix ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look atMoreIt's pretty easy one two three clicks of the fire button fire key unlocks oh we're beeping look at that Nathan had we go into the lock mode again one two three fire key locked oh I can't fire oh.
How do you fix a Smok vape that won't charge?
If that doesn't work try blowing into the charging port to remove any potential debris or fluff which is getting in the way of the contacts. If you're still experiencing issues you can try to clean inside the charging port with rubbing alcohol but make sure that it's fully dry before inserting the cable.
How do I know if my vape is broken?
5 Signs That Show It's Time To Change Your Vape CoilYour Vape Tastes Burnt. This is probably the most noticeable thing that tells you your coil needs replacing, and something most vapers will experience. ... Your E-Cigarette Is Gurgling. ... Your Vape Tastes 'Strange' ... Your Coil Is Used Up. ... E-Cigarette Leaks.
How do I know if my vape battery is bad?
Here's a list of symptoms that all point to a bad vape battery:Your vape depletes much faster than usual. ... You can feel the battery heating up as it's charging or discharging.You're using the same vape battery for more than a year.When you charge the batteries, they reach the maximum capacity faster than usual.More items...•
How do you unlock SMOK Nord 4?
SMOK NORD 4 pod system kits are shipped in a locked position. In order to unlock your device, simply click the 'power button' three times quickly. This will unlock your SMOK NORD 4. The other possible problem is that it is not charged.
What is power lock on SMOK Nord 4?
3:508:23SMOK NORD 4 - Now with More Power! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape itMoreOne two three and it's going to lock the entire device lock the wattage lock it so you can't vape it. And then if you want to turn it on or off will be five clicks one two three four.
Why does SMOK Nord 4 say no atomizer?
If you press the firing button on your e-cig and you see the message 'no atomizer' or 'check atomizer' it means that your vape mod is not reading the coil within your vape tank properly. It can be because of the 510 connection, the vape coil itself or the bits in between.
How do you set up SMOK Nord 4?
1:522:56SMOK Nord 4 Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipE-liquid once full close off the fill hole to ensure your e-liquid doesn't leak. Out. Then insertMoreE-liquid once full close off the fill hole to ensure your e-liquid doesn't leak. Out. Then insert the pod into the nord-4. Device the pod will be held in with magnets.
Why won't my Smok vape turn on?
Here are a few common reasons that your SMOK vape won’t turn on: : 1 The vape battery needs to be charged. Have you charged your vaporizer recently? You should have a pretty regular charging schedule and make a habit of plugging it in at the same time every day. Make sure that the cord is fully inserted, and always confirm that the USB light turns on to indicate that the device is in charging mode. 2 If the battery is dead, you can push the button a hundred times, but the result will be the same – it won’t turn on. Try charging your device fully, and then make another attempt to power it up. 3 There’s a faulty connection somewhere in your SMOK vape. Whether it’s a bad charger or a firing pin that’s getting stuck, anything that leads to an incomplete electrical connection is going to be an issue. It could be that your firing pin has vape juice on it, or it might not be coming in contact with the charger. 4 If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
How many clicks to unlock vape?
Unlock your device, which you can typically do with 5 clicks in rapid succession. Most vapers simply get in the habit of clicking the button rapidly until the indicator light turns on, so you don’t have to literally count out five clicks every time.
Do smok vapes have a lock?
If your specific device has more than one button, and you aren’t sure which one is the main fire button, take a quick look at your instruction manual. Most SMOK vapes also have an online manual that you can find with a quick internet search. SMOK vapes have a lock system.
What to do if battery is grimy?
If your battery has grime or dust on its connection points, that could be causing the problem as well. Use dry tissue or a cotton swab to gently clean the connection points, and then try the charging process again.
Who is Gianna Del Monte?
Gianna Del Monte is the Brand Manager at VaporFi. She has been in the vaping industry since June 2015 and has extensive experience in successfully managing and marketing a variety of new vapor product launches. Originally from New Jersey, Gianna has lived in the Miami area for the last 5 years.
How to use a smok mod?
How To Use SMOK Mods: Installing A New Coil. When you change the coil on your tank, especially if you’re using an RDA, the SMOK mod will ask you if it is a NEW or OLD coil and give you two potential Ohms readings. Select the one that is the same as your coil – if it’s new, basically, just hit the NEW option.
How to change the color of the fire bar?
From the Home screen, Click THREE times on the fire bar. Click through the menus until you reach Screen Setting. Use the buttons on the mod to move through the options until you find the color you want. Once you have the color you want, hold the fire bar for ONE SECOND. Done.
Does Smok update firmware?
SMOK does release firmware updates every now and then but these seldom change the look and feel of the UX (user experience) or how the mod’s menus and settings function. Normally, the firmware just adds more power and fixes known bugs. PLEASE NOTE: this guide is designed for newbie vapers.
Can you fire a mod with homemade coils?
If there are any issues and/or problems with the coil, its resistance, or the connection, the mod will simply not fire and likely show an error message.
How to vape with a smok?
How to Vape With the SMOK RPM 2. To vape with the SMOK RPM 2, puff on the device while holding the fire button. The RPM 2 has an 80-watt power range, but you should begin vaping at a much lower wattage than that until you’re certain that the coil you’re using can operate at 80 watts without burning the cotton wick.
What is a SMOK RPM 2?
The SMOK RPM 2 pod system is a device that deftly straddles the line between the simple pod-based vaping devices that beginners use and the more advanced and feature-rich mods that expert vapers prefer. It’s got the small size and convenience that made you fall in love with pod systems, but it’s also got some of the “power user” features that you’d expect to find in a full box mod.
Why does my SMOK RPM 2 make a gurgling sound?
If you flood the coil, you’ll notice a gurgling sound when you vape as the excess e-liquid begins to creep up the pod’s chimney.
How to charge a SMOK RPM 2?
The SMOK RPM 2 has a USB charging port and comes with a charging cable. To charge the RPM 2, use the cable to connect the device to your computer. The device’s display will indicate when the charge cycle is complete; disconnect the charging cable at that time.
How to fill a e-liquid pod?
Insert the tip of your e-liquid bottle into the pod’s filling port and squeeze the bottle gently until the pod is nearly full. Leave a bit of room for air at the top of the pod. Close the filling port and return the pod to the device . If you’re filling a new pod for the first time or replacing the coil, refer to the next section about how ...
Is the Smok RPM 2 compatible with the coils?
The RPM 2 is compatible with the coils for the original SMOK RPM and also has several new coils of its own. With the replaceable coil system, the SMOK RPM can deliver whatever type of vaping experience you want. Enjoy a high-nicotine mouth-to-lung experience or chase clouds to your heart’s content – the choice is yours.
Is it cheaper to buy a new coil or replace a pod?
Buying new coils is also significantly cheaper than replacing your pod constantly. When it’s time for a new coil, you should wait until the pod is empty to avoid wasting e-liquid. Pull the old coil out of the pod. Place a drop of e-liquid on each of the new coil’s wick openings before pushing the coil into the pod.
How To Prime SMOK Nord Coils Properly Every Time
As noted above: you can’t escape SMOK’s dud coils, but you can make sure you’re priming your coils correctly. And don’t worry, it’s super-easy. All you have to do is follow these steps:
Why Is My SMOK Nord Leaking?
I haven’t experienced this problem, but it is a fairly common one. It is also straightforward to fix; you need to make sure you’re not overfilling your pod. If you’ve experienced a leak with your SMOK Nord, try filling it up to about 80% of its maximum. Doing so should fix most leaking issues.
Best SMOK Nord Alternatives
Not happy with how the SMOK Nord is performing? If you’re looking to upgrade, the following pod vapes are the best pod vapes we have tested in the last 12 months.
Can You Run Nic Salt E Juice With SMOK Nord 0.6 Coils?
Yes and no. I mean, you can run Nic Salts E Juice on the sub-ohm 0.6ohm coil head, but there are a couple of things you need to know:
