Fill your syringe and gently push the syringe tip into the cartridge and fill it to the top, or where you find the max fill line. It is recommended that you leave the cartridge attached to your battery to help hold onto it better while refilling.
What is spinner 3s vape pen battery?
Compatible with 510 threaded attachments, Spinner 3S lets you power up your favorite tanks with long-lasting battery life. Spinner 3 VV vape pen batteries allow you to regulate the power between 3.6 and 4.8 Volts if you like to control your vapor clouds.
Can you refill a vape pen?
It is likely that you will not get it right the first time you attempt to refill a vape pen, especially with small sizes like 1ml vape cartridges involved. While frustrating, your second try will be much better.
What's the difference between the spinner and spinner 3?
The strongest version in the spinner version. -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip. The strongest version in the spinner version. -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ).
Are refillable vape cartridges a good alternative to smoking?
Vape pens are known to be an incredible alternative to smoking. Making refillable cartridges is a great step towards a cleaner environment. Most vape users have a history of using an e-cigarette. Thus, a lot of them are only familiar with disposable cartridges.
How do you use a spinner 3?
0:042:14How to use your vision spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not going to turn on no matter how long how many times turn it back on five clicks one twoMoreIt's not going to turn on no matter how long how many times turn it back on five clicks one two three four five blink blink blink. You're ready to go okay.
How do you charge a spinner 3?
0:061:06How to charge a vision spinner battery - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. ItMoreInsert the USB outlet into your AC adapter plug. It into any wall outlet. Take a spinner screw. It into the other end of your USB charging cable now.
How do you turn on the spinner 3 vape?
The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.
How do I know when my vision spinner is fully charged?
When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged. Typically charging will take 4-5 hours.
How do you charge a vape?
How to Charge a Vape PenStart by connecting your power lead to the plug.Now insert the plug into the power outlet in the wall.Then find the power input on your vape. ... Once everything is plugged in, check to see if there's a light (usually solid/flashing red) indicating your device is charging.More items...•
How do I charge my Cartisan spinner vape pen?
The Cartisan spinner dab pen has an ego Spinner 650mAh battery that powers it, and you can easily charge it by unscrewing its thread atomizer and attaching its 510 thread USB charger. Once you plug the Cartisan charger into an electrical outlet or a computer's USB port, you're ready to go.
How do you use a vision spinner vape pen?
2:488:31Vision Spinner II Walk Through - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt came with the battery is also clean on the end and to do that same type of thing just take a flowMoreIt came with the battery is also clean on the end and to do that same type of thing just take a flow piece of paper towel. Put down the threads here. And just run it around on the inside.
How do you fix Cartisan batteries?
0:191:16How Do You Fix a Vape Pen Battery? - O2VAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paperMoreAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paper clip. And if you stick the paper clip in between the connection plate and the threads.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
Can I charge my vape with a phone charger?
It's always best to use the same cable that came with your device to charge your vape. Most phone chargers are fine, however some phone chargers where the cable cannot be removed from the charger are designed specifically for the product they came with.
How to fill a vaporizer with e-liquid?
Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank. Place the dropper portion of the e-liquid bottle against the inside of the tank. Fill the dropper and empty it into the tank several times until the e-liquid reaches the max fill line.
How to take a vaporizer apart?
Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart. Put a few drops of e-liquid directly onto the coil, fill up your tank, and then you’re ready to vape. Steps.
How to put e-liquid in a vaporizer?
Put a drop of e-liquid into the coil and attach the coil to the vaporizer. Once you have the coil out, use the dropper on your e-liquid bottle or top to put 1 or 2 drops of e-liquid inside the coil. Fill the tank with e-liquid. Unscrew the entire metal bottom of the vaporizer to get access to the tank.
How to make a liquid e-liquid?
2. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger. Put 1 drop of e-liquid onto each cotton hole located on the coil.
How to change flavor in a vaporizer?
1. Disassemble the vaporizer’s tank. Unscrew the airflow base located at the bottom of the vaporizer. Then, pull the coil out from inside. Leave the tank, top connector, and mouthpiece attached for now. If you’re changing flavors, clean out your tank before you refill it. ...
How to change flavor of e-liquid?
If you’re changing flavors, clean out your tank before you refill it. Put 1 drop of e-liquid onto each cotton hole in the coil. The bottle that your e-liquid is in should contain a dropper. Unscrew the top and fill the dropper with your e-liquid. Then, hold the coil horizontally between your thumb and pointer finger.
Is vaping a stress reliever?
Learn more... Vaping can be a fun, stress-relieving way to smoke without bringing so many toxic chemicals into your body. However, there are many components to vaporizers, which may make your first filling experience confusing. Whether your vaporizer is top-fill or bottom-fill, you’ll need to take your vaporizer apart.
GENERAL ADVICE ON FILLING YOUR PEN
Prevent Spills – In order to prevent spilling your concentrate, be sure to use the tools that your vape pen requires. It’s always a good idea to carry around a small kit or case that is easily accessible and easy to store.
VAPE PEN REFILL PROCESS
Now that we’ve covered the basics and you’re up to speed on general tips, let’s get into specifics. It may be easier to buy disposable cartridges, but most pro vapers choose to refill their device themselves as refillable cartridges can save you big over the long run.
VAPE PEN BENEFITS
A lot of power and performance is packed into today’s vape pens. Their unique design and engineering make them perfect for discreet vaping on the go, providing a powerful experience that you won’t soon forget.
How to refill a cartridge?
Refilling your vape cartridge is a simple 3 step process involving a syringe. Start with choosing your favorite oil or distillate. There are many options you can choose from; if you want, you can make your own oils or use a pre-filled distillate syringe from the cannabis dispensary.
Step One: Remove the Mouthpiece
Open the cartridge up, and you can do so by twisting it counterclockwise until it is fully detached. You might have to twist it two or three full rotations to free the thread holding it in its place.
Step Two: Fill the Cartridge
This is the step where we will use the syringe we mentioned earlier. But if you do not have a syringe, an eye-dropper does the job as well. The former is more precise and has a lesser risk of leaking products.
Step Three: Replace the Mouthpiece
You are almost done! Take the mouthpiece and gently put it back onto the cartridge. Twist it around clockwise until it is tightly screwed on. While
How to take a vaporizer apart?
The first step is to take your vaporizer apart precisely, while remembering what goes where for later. Unscrew the mouthpiece and the airflow base at the bottom of your device to reveal the coil.
How long should I let my e-liquid settle?
Step 5: Let your e-liquid settle. When everything’s back in place, it’s always best to allow your e-liquid to ‘steep’ inside your tank for 5 minutes. Your coil will then be primed to deliver a supreme vaping experience with optimum flavour.
Vision Spinner 3 S
Check out the NEW Spinner 3 S vape pen battery featuring an all-new design and upgraded built-in battery with adjustable power.
VISION SPINNER 3S Features
Built-in 1600mAh Battery 510 Connection Upgraded Circuit Board Upgraded Battery 5-click on/off Button Variable Voltage Dial Output Voltage Range: 3.6V-4.8V Micro-USB Charging Port
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Vision Spinner 3 Battery
The strongest version in the spinner version. -Spinner 1 Simple and practical quality -Spinner 2 Simple and practical quality, increased endurance -Spinner 3 Simple and practical quality. 1600mah ( power ) /1000mah (smart in size ). Updated the more stable V chip.
Our Service
1. From raw materials to finished products, every process is tested and controlled professionally and strictly by our professional machines and personnel. 2. Our products are approved CE, RoHS certificate. 3. Except for the Standard components, if you have special request for the components, we will customize it for you.
