In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil.
How do I change the coil on my vape?
Next, unscrew the coil from the base of the vape by twisting it counterclockwise. Pre-saturate your new coil with 5 to 8 drops of vape juice so it won’t burn, then screw your new coil into place.
How do I change the coil on my aspire AVP pro?
Aspire AVP Pro Coils Replacement coils for the Aspire AVP Pro are all Press-Fit and now use Kanthal AF wire for increased coil longevity. To change the coil, remove the pod from the battery and pull the coil out. The coil removal tool can be used if you have trouble.
How do I change the atomizer coil on my aspire tank?
If you’re using a new coil, the cotton needs to be completely wet before you begin vaping – so wait several minutes for the e-liquid to soak in. In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank.
What makes the Aspire coils so special?
The new aspire coils use the U-tech technology, vapor flows through the u-shaped chamber and passes the kanthal coils twice before being inhaled.all – new airflow performance allows for an amazing vape flavor and e juice taste.
How do I change the coil on my Aspire Nautilus?
0:222:45How To Change Aspire Nautilus Coils | Rover 2 Kit | Zelos | NX30 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can just pull these off and remove them they're just fixed into place with sort of a tight o-MoreYou can just pull these off and remove them they're just fixed into place with sort of a tight o-ring band. And that's because obviously if you uh if you drop it you can take it out to add the coil.
How do I open my Aspire vape?
0:001:44How To: Fill And Prime The Aspire Revvo Vape Tank | VaporleafYouTubeStart of suggested clipEnd of suggested clipYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to removeMoreYou can unscrew the mouthpiece of a top cap and that allows you to remove the airflow ring to remove the coil all that you need to do is remove the compression nut.
When should I change my Aspire coil?
5 Signs That Your Coil Needs ReplacingBurnt Taste. The first and most prominent way to tell your coil needs changing is by experiencing an unpleasant burning taste in your vape.Bubbling Noise. In this case, your device is literally telling you to change the coil. ... Weak Flavour. ... Little Vapour. ... Leaking Device.
How do you change atomizer on aspire?
0:291:46How to use your Aspire Pockex - YouTubeYouTubeStart of suggested clipEnd of suggested clipBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half ofMoreBegin by unscrewing the top cap. Once separated you will see the coil attached to the top half of the tank to change the coil simply unscrew the old atomizer will replace.
How do you unscrew a tight vape coil?
Rubber gloves: Put on a pair of washing up gloves and try to unscrew the tank with them on. They increase grip and make it much easier. Rubber bands: Wrap a rubber band around the metal part of the tank. The increased grip will make it easier to unscrew in your hands.
How do I take apart my Aspire vape tank?
How to Take Apart a Vape TankTo remove the atomizer coil, unscrew it by twisting counterclockwise.To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place.To remove the mouthpiece, lift it straight up to pop it out of its socket.
How do I know if my coil is burnt?
Signs it's time to change your vape coilA burning taste. Vaping a dead coil will eventually result in an acrid, burning taste. ... Gurgling sounds. Vapes shouldn't gurgle. ... Weak or “off” e-Juice flavor. This often precedes a burnt taste. ... Low vapor production. The vapor produced by your coil will gradually lessen with time.
How many puffs Should a coil last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
Can a burnt coil make you sick?
Depending on how bad the coil is burnt, you could end up choking or vomiting immediately. Depending on what kind of coil you are using they can produce some particles that stick to the vapor and end up ingested by the user when they are burned dry. Some have an allergy to these particles being created.
How do you remove an Aspire coil?
0:142:25How to change your aspire k2 coil - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you do mind a little paper towel action pinch the coil pinch the base. Give it a turn. JustMoreIf you do mind a little paper towel action pinch the coil pinch the base. Give it a turn. Just unscrew coil pops right out okay grab a new coil drop it into the top.
How do you remove a coil from aspire PockeX?
How to change a PockeX coilUnscrew the top cap.Unscrew the coil from the cap.Screw in a new coil.Refit the top cap along with the new coil.Wait for 5-10 minutes for the wick to soak up e-liquid.
How do I change the coil on my Aspire K Lite vape?
Coil installation of K Lite Kit is as easy as well. Invert the tank, unscrew to disengage the base hardware; Unscrew to remove the used coil and replace with a new one; (For TPD version, push and unscrew to remove the used coil and also push and screw to install a new one);More items...•
Find Your Coil Tutorial By Brand
Whether you have an Aspire, Smok, Innokin or whatever type of device, this page is here to show you how to change your coils. We dive deep into a wide range of some of the most popular sold gadgets, to ensure if you are unsure what to do to change your coil, you will probably find it here.
What are vape coils?
You may have heard someone say, you need ot change your vape coil, but aren't entirely sure what they are. If that sounds like you, then the best thing you can do, is click on ANY of the videos below and you will see me take one out of a vape kit and hold it up. You will learn very quickly what a vape coil is from that.
When should I change a coil?
All vape kits are different, and so each needs a different approach. In short, there is no one size fits all approach to knowing when to change a coil, but it will be driven by a few factors:
Change Vape Coil Steps
1. Remove the tank from the vape body Disassembling the vape is the most careful step. The left and right hands hold the vape body and the tank, and rotate in the opposite direction to make the tank unscrew from the vape body, so that the tank can better change the vape coil.
When Is The Coil Changed
The vapers change the coil once every 1-2 weeks on average, but in many cases it depends on the suction habits of each vapers. The higher the frequency, the more frequent the coil replacement. The sucked taste becomes lighter, sour, or burnt, and the coil can be changed.
Why Does My Vape Taste Burnt with New Coil
1. Pour out your juice and change with another e-liquid. If there is still a problem of burnt or light taste, it is the cause of the device. It may be that the output of the device is not enough to cause the taste to be light or too high to cause a burnt taste.
How to replace coil on Aspire atomizer?
In most Aspire tanks, the atomizer coil is connected to the tank’s bottom hardware. To replace the coil, twist the bottom hardware to remove it from the tank. Twist the atomizer coil out of the base and twist in a new coil. Prime the coil with a bit of e-liquid before using it for the first time.
How to clean coils on Aspire tank?
You can also clean the atomizer coils for your Aspire tank by swishing them in warm water or vodka. Cleaning a coil removes some of the crust and can prolong the coil’s life. It will not, however, fully restore the coil’s original flavor. After cleaning an atomizer coil, allow it to dry for about 24 hours.
How to get a good mouth to lung vape experience?
By replacing the mouthpiece and adjusting the airflow collar, you can get a good mouth-to-lung vaping experience with almost any tank. Don’t forget that reducing the tank’s airflow will cause the coil to run hotter. You may need to lower your device’s wattage setting to compensate.
What to do if your Aspire tank leaks?
The first thing that you should do is disassemble and reassemble your tank.
What is the wattage of an Aspire coil?
Wattage Range. On the side of most Aspire atomizer coils, you’ll see a set of numbers – such as "40-60W” – indicating the coil’s suggested wattage range. Although the range is only a suggestion, you’ll generally have the best experience if you set your device’s power within that range.
Why does my Aspire tank gurgle?
If your Aspire tank is gurgling and spitting, the most likely reason is that your device’s wattage setting is too low. As a result, the air pressure from your puffs is drawing more e-liquid toward the coil than the coil can vaporize. The excess e-liquid pools and spits out through the mouthpiece.
How to replace glass in Aspire Triton?
To replace the glass, disassemble your tank and remove any glass fragments with tweezers. Push gently to get the replacement glass sleeve into position and reassemble the tank. Note that in the Aspire Triton, the glass is a permanent part of the upper hardware.
How to take off a vape coil?
The coil is also called an “atomizer head” or “replacement head.”. You can use your hands or a paper towel to take off the coil. Twist the coil counterclockwise until it comes off of the bottom of your vape. A paper towel will help keep your hands clean.
How to get rid of burns in vape coil?
1. Pre-saturate your coil with 5-8 drops of vape juice. The cotton in your coil is brand new when you take it out of the package. If you place it directly onto your vape, it will start to burn. To avoid this, drip about 5 or so drops across the cotton from the vape juice bottle.
How to get vape juice out of tank?
If there’s any vape juice still in your tank, dump it out. Next, unscrew the co il from the base of the vape by twisting it counterclockwise. Pre-saturate your new coil with 5 to 8 drops of vape juice so it won’t burn, then screw your new coil into place.
How to unscrew a vape tank?
Every vape setup is slightly different, but in general, you can easily unscrew the tank from the bottom section. Hold the tank upside down and twist the tank off using your hands. If there is juice in your tank already, you can use a paper towel to avoid getting your hands greasy.
Why does my coil clog up?
If it has a burnt aftertaste or if the flavor seems sour, it is time to change your coil. Over time the juice starts to clog up the coil. If you use sweet, sugary juices, they may clog up your coil more easily. The sweetener essentially caramelizes on the coil as it heats up.
Can you use more or less juice in a vape?
Use more or less juice, depending on the size of your coil. Make sure the coil you purchase is the right coil for your vape. Read your instructions to determine the type of coil or bring your tank to a local vape store.
Can you replace a vape coil with fresh juice?
If there is any vape juice still in your tank, dump it out in your trash can. This way, you can replace it with fresh juice after you put on a fresh coil. It is helpful to replace your coil with as little vape juice remaining as possible.
What coils are used in Aspire Tigon?
Aspire Tigon Coils. Tigon, can be used with three different coils: a 0.4ohm coils, 1.2ohm coil, Mesh Coils 0.7ohm. All of which can be used for salt nic. On the Aspire Tigon tank, coil replacement is just a case of unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again.
What is the Aspire Cleito atomizer?
The Aspire Cleito Sub Ohm Atomizer Tank uses a revolutionary coil design that completely eliminates the need for a static chimney, which decreases the restriction of airflow, resulting in long-lasting expanded flavor and increased vapor production.
What coils does Atlantis use?
Atlantis Evo coils are Kanthal Clapton coils with resistance 0.4ohm and 0.5ohm. The 2 coils enable the EVO to achieve your preferred taste requirements when using a wide array of E-liquid flavors.
What is a triton coil?
Triton coils are one of the highest quality coils on the market and are designed to provide the perfect vaping experience without the hassle of having to build your own.
Cloud Waves Senior Member ECF Veteran
So I use the Aspire BVC coils and have found that 80vg ejuice gets gunky pretty fast and was wondering if there was a way to clean these other then dry burning. I notice that after i dry burn i have alot of dry hits.
ElevenEleven Super Member ECF Veteran
Let them soak in everclear/vodka over night and see if that works better. 80vg is pretty thick for a BVC atomizer.
bwh79 Vaping Master Verified Member ECF Veteran
Don't dryburn those coils, you'll scorch the wick and the coil will be ruined.
djsvapour ECF Guru ECF Veteran
You can only dry-burn a coil that either has no wick (you've pulled out the wicking material) or a silica wick.
wesson Senior Member ECF Veteran
There are many on this forum that say that you shouldn't "clean" the Aspire BVCs; that they are designed to be used and then discarded when you get a funky taste or poor performance. Personally, I regularly rinse my coils in clear hot water (under a running tap). By regularly, I mean every couple of days.
Sir2fyablyNutz ECF Guru Verified Member ECF Veteran
I've had good luck letting a gunked BVC coil soak in vodka for a few days, shaking it occasionally then blow and air dry. It's not exactly like new but it is very vapeable. I'm reusing one right now as a matter of fact.
Cloud Waves Senior Member ECF Veteran
Yeah I don't dry burn any more cause it gives me a burnt taste. I have some rubbing alcohol that is 90% alcohol that I use to get rid of flavor ghosting. Would it be ok to soak a coil in this?
