Full Answer
What size coil do I need for my vape?
With a 1.2 ohm coil you’ll probably be looking at around 15W – 25W for a satisfying vape but it really depends on personal preference. If you’d like any tips on building your coils then check out our guide on coil building.
How to wrap vape coils?
For more info, watch Rip Trippers tutorial on how to build a parallel coil by hand. For even better results you can use a coil jig: just wrap the first coil using the jig’s guide, and manually wrap the second coil in between the gaps. Wrapping vape coils can appear to be much more difficult than it really is.
What size Kanthal should I use for vape coils?
We recommend using some basic 26-gauge Kanthal for your first few vape coil builds. It will fit fine in most atomizers and it’s very easy to work with. It is worth noting that most atomizers nowadays can easily fit 3 mm coils and, as a result, you will rarely see people referring to coils as micro/macro.
Can You Make your own vape coil heads?
Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice.
How many watts can a 1 ohm coil handle?
Every coil is 'rated' for a certain wattage range. For example, our 1.0Ohm MTL S-Coils are rated for between 14-22w, but the 0.5Ohm DL S-Coils are rated for between 20-30W. You can usually find these ratings on the website, packaging or the coil itself.
What is the max wattage on a vape?
Pod systems of today tend to hover around 25 watts max, with some specialized systems going higher to accommodate sub-ohm vaping as an advanced feature.
How many watts do I need for a .5 ohm coil?
So that 0.5-ohm coil with a fully charged battery at 4.2 volts will pull a maximum of 8.4 amps and deliver 35.3 watts.
How many watts is a 0.33 ohm coil?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
Does higher wattage burn coils faster?
When you vape at a high wattage, the liquid absorbed by the coil's wick could be burning off faster than the wick material can absorb more ejuice.
What makes big clouds vape?
For big clouds, choose an e-liquid with a 50/50 PG/VG ratio, or higher VG. High PG e-liquids are not good for producing lots of vapour and can be quite harsh on your throat. E-liquid strength is also important when using lower resistances.
How many watts is a .2 ohm coil?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What is the best wattage for a 0.4 ohm coil?
25W0.4 ohm RPM Mesh Coils feature a honeycombed mesh design and are best for flavour seeking vapers. Recommended Wattage: 25W.
What wattage should I vape at 1.4 ohm?
The other coil that comes with the kit is the Nord regular coil, which is a 1.4-ohm coil head with a maximum wattage of 12 watts.
How many watts is a 1.6 ohm coil?
between 10-14wattsBest wattage for the 1.6ohm coil would be between 10-14watts. If using a variable wattage device we would recommend starting on 10 watts and gradually move up through each wattage until you find a suitable vape.
Is 1.4 coil for salt Nic?
Most pod mod vapers find that somewhere between 1.0 and 1.4 ohms is the sweet spot when it comes to 50mg salt nic e-liquids. In most cases, anything lower will result in a burnt taste and harsh sensation, and anything higher will produce very little vapor, not to mention a weak nicotine hit.
How many watts is a 1.8 ohm coil?
For example if you have a 1.8 Ohm coil running at 3.7 volts you'll get an output of around 7.3 watts.
An Introduction to Voltage Watts and Ohms
1. Resistance (Ohms) 2. Which resistance should I use? 3. Variable Voltage 4. Variable Voltage vs Variable Wattage 5. mAh Explained 6. Sub Ohming
What Ohm Resistance Should I Use in My Clearomiser?
There’s no one answer (although the sub-ohm chart above may help) – it depends on you, the vapour and throat hit you prefer, as well as the voltage...
Variable Voltage E-Cigs Explained
The resistance of your atomiser is not the only thing which controls the amount of vapour, flavour and throat hit that are produced. It also depend...
Variable Voltage vs Variable Wattage Devices
Essentially, the difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With...
What Does Mah in E-Cig Batteries Mean?
You’ve probably seen mAh used to describe electronic cigarette batteries. mAh is important because it measures how long a battery lasts. Going back...
Advanced Explanation of Voltage, Watts and Ohms For Vapers
Electronic cigarettes are incredibly simple circuits that contain a battery, a switch and a heating coil. The circuit is effectively a controlled s...
ConnorH2 New Member
Hi there, I'm new to vaping. I bought myself a Vaporesso Tarot Nano Kit with some 'Traditional ECU Coils ' with a sticker that says 35-40 watts. Do I need to run it at this voltage? can I go higher? the coils have a ohm of 0.5.
Belhade Ultra Member Verified Member ECF Veteran
That's an estimated power range that's the coils are supposed to perform at. Which sounds about right for that resistance; I fire single .6Ω coils at 25-30w, and dual coils reading .6Ω at 30-40w. Best to start at the lower end of the range, see how it works then slowly increase as necessary.
bombastinator ECF Guru Verified Member ECF Veteran
That's an estimated power range that's the coils are supposed to perform at. Which sounds about right for that resistance; I fire single .6Ω coils at 25-30w, and dual coils reading .6Ω at 30-40w. Best to start at the lower end of the range, see how it works then slowly increase as necessary.
eastcoaster91 Senior Member
I just bought the Tarot Mini Kit and I'm using the .5ohm 316l coil rated at 25-35watts and I'm running it at 35watts. I've taken it as high as 45watts and it seems like it can't keep up with me chain vaping .
ConnorH2 New Member
thanks a lot guys, I've been running it on 35. I'll keep it below 40 though
supertrunker Living sarcasm Verified Member ECF Veteran
Hi there, I'm new to vaping. I bought myself a Vaporesso Tarot Nano Kit with some 'Traditional ECU Coils' with a sticker that says 35-40 watts. Do I need to run it at this voltage? can I go higher? the coils have a ohm of 0.5.
Eskie ECF Guru Verified Member ECF Veteran
Just prime the coil well, then break it in. Start with low wattage and increase a few watts at a time until your sweet spot. It will likely be under the "recommended, rated" wattage or at the low end of it.
How to get the perfect vape experience?
After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.
What is a vape device?
Vape devices use simple circuits that contain a battery, a switch and a heating coil. The circuit is effectively a controlled short, with the power output from the battery used to create heat.
What does wattage mean in vaping?
To put it another way, watts is essentially how much power your vape produces and voltage is how much power is put through the device. So, as you increase the wattage the voltage also increases and vice versa.
Why do vapes burn out faster?
You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.
What is the resistance of a sub ohm coil?
The term sub-ohm, while still used, is not as relevant as it used to be. Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping.
How does variable wattage work?
The variable wattage device will then automatically adjust the power going through the atomiser (the voltage) to produce the power output you need (the wattage).
What affects vapour and throat hit?
The resistance of your coil is not the only thing that affects vapour, flavour and throat hit. It also depends on the amount of power flowing through your coil. There are two common types of vape batteries which allow different amounts of power to flow through your coil. These are variable voltage and variable wattage.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is macro coil?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
What is a parallel coil?
In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.
How to wrap a coil?
To wrap a coil, you’ll need either a drill bit, a screwdriver or (ideally!) a coil jig to wrap the wire around. The size of whatever you use dictates the inner coil diameter.
What type of wire is used for variable wattage?
Kanthal A1 and Nichrome N80 are the two types of wire used for Variable Wattage mode only. Stainless Steel (316) can be used in either Variable Wattage or Temperature Control (TC) mode.
Does regulated mod affect battery drain?
2) Alternatively, if you’re using a regulated mod the resistance of your coil doesn’t affect the drain on your battery. Instead, the wattage you choose to vape affects how much power you draw from your battery. Obviously the higher the wattage you vape at, the higher the draw on your battery will be.
A stoner dude at a sketch vape shop told me his vaping secret and it actually worked?
I'm a 30f who has smoked a pack a day since I was 15. I tried vaping a least 10 times over the last 5 years. Buying an expensive mod, great juice, throwing the cigs away. And could never seem to get past the burn in my throat from every vape hit. Felt like lava and I couldn't even inhale the tiniest of wisps without coughing to near death.
Little rant about sharing my vape
sometimes my friends annoy me when it comes to sharing especially when we drink.
How long do vape coils last?
How you vape and how well you treat your coils can significantly extend their lifespan. Generally, new coils last between one to two weeks, but that can be extended if you properly break-in new coils when you get them and practice good care and maintenance procedures during and between usages.
How to attach coils to a vaporizer?
Attach coils to vaporizer: Put your coils in place and press your firing button until they heat up completely. Just like building your coils for the first time, make sure that they heat evenly across all of the wraps. Look for signs that there is anything heating unevenly and make sure it is clean and dry.
Why does my vape get burnt?
Instead, because there’s no juice to heat, the coils heat the wicking material which will cause the material to be used up faster and produce a less than desirable vaping experience. You can avoid this by:
Why do coils need to cool down?
Your coil needs to cool down and absorb more e-liquid before it is ready to produce more vapor. If you are firing too quickly, you could be leaving your coils dry between hits without even realizing it. Don’t run your tank empty. Letting your tank drain all the way to the bottom before you refill is asking for trouble.
How to clean coils?
Rinse the coil under hot running water: Hot water will wash away any leftover debris or liquid that was sticking to the sides. Shake out the water: Gently shake out any water that is sitting between the coil wraps and then let your coils air dry on top of a paper towel or other absorbent material.
How many dry hits does a vape tank take?
Once your device has been appropriately filled, reassemble the tank and attach it to your battery. Take four to five dry hits, which is to say take a drag without activating your battery’s fire button. This allows the vape juice from the tank to siphon into the cotton of the wick.
What is priming coils?
Priming your coils is like the break-in period for a new car. It lets the coils settle into their normal operating conditions before you add e-liquid. Avoid over-pressing the firing button. Use the puff timer tools on your vaporizer to learn when to hold and release the firing button.
