Below are the Atlantis 2 Coils and Their Recommended Wattage Ranges 0.3ohm: 70-80W (80W was our preference) 0.5ohm: 20-30W (30W was our preference)
Can I use the Atlantis 2 coil in the Atlantis 1?
The coils are cross compatible meaning you can use either set of coils in each of the tanks. However when using the 0.3ohm Atlantis 2 coil in the Atlantis 1 the vapor and drip tip gets hotter quicker, as the Atlantis 1 doesn’t have the same wide airflow and wide bore drip tip as on the Atlantis V2. What wattage is the 0.3ohm coil recommended at?
How much wattage do I need for my vape tank?
1 Start Low. Even If Your Tank Says It Can Handle 150W, Start At 60W And Work Your Way Up 2 Higher Wattage Does Not Mean Better Vaping. I’d Rather Vape At 60W And Conserve My Coil Heads 3 Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
What is the difference between the Atlantis V2 and the original?
So the Atlantis V2 is a much improved tank and comes with that added airflow, and bigger tank. The airflow and drip tip are in my opinion big improvements over the original and work really well with the 0.3ohm coil.
What is the difference between the Aspire 2 and the Atlantis?
The Aspire 2.0 is a marked improvement over the original Atlantis and Aspire have certainly listened to their customers feedback on the original. The coils now feature 100% organic cotton, a new 0.3ohm and 1ohm coil have been added to the 0.5ohm one, as well as increasing the tank to a 3ml capacity.
What wattage should I vape .3 ohm?
30-60WThe EF 0.3ohm Coil is rated at 30-60W, allowing a great vaping experience with thicker vapor clouds.
How do you fill a Atlantis 2 tank?
3:5712:34Aspire Atlantis V2 - Unboxing & How To Fill - Features Tutorial (Sub Ohm)YouTubeStart of suggested clipEnd of suggested clipJust open this up and use the glass pipette to fill it up. But all you want to do when filling it upMoreJust open this up and use the glass pipette to fill it up. But all you want to do when filling it up is fill it down the sides. Between this stainless steel section inside which is the chimney.
What coils are compatible with Aspire Atlantis?
The Aspire Atlantis Dual-Coil Atomizer Heads are known for producing immense vapor clouds and extremely flavorful hits. The 0.3 Sub Ohm coils are compatible with 70W-80W of output. The 0.5 Sub Ohm coils are compatible with 20W – 30W of output.
How do you refill a Atlantis vape?
Atlantis 2 Filling Instructions 1. Remove the tank from your mod and unscrew the bottom hardware. 2. With the tank upside down, simply pour your favorite e-juice between the chimney and the Pyrex glass tube until you hit the “crown” shaped coil receptacle (the top of the chimney where the coil screws in).
What is in Atlantis vape?
Aspire Atlantis E-Liquid, sink deep into an ocean of flavor, this delicious e cig E-Juice is overflowing with the new blend of pineapple, blueberry and guava. A Vape with a scrumptiously sweet mix of organic products, especially smooth and sweet flavor. This product features a 75% VG and 25% PG ratio.
How do you put juice in a aspire tank?
0:241:45How To: Fill And Prime The Aspire Revvo Vape Tank | VaporleafYouTubeStart of suggested clipEnd of suggested clipPress straight down on that plunger and squeeze. And the juice will fill from the bottom. Up toMorePress straight down on that plunger and squeeze. And the juice will fill from the bottom. Up to prime your coil all that you need to do is screw the top on.
What tanks take Cleito coils?
The Aspire Cleito Exo tank is compatible with most standard 510 drip tips. It works well with our top of the range vape mods including the Innokin Cool Fire and KangerTech Topbox Mini. Combine it with the Smok Alien and it will give an unparalleled vaping experience.
What coils fit What tanks?
What coils will fit my vape?TankCompatible CoilsCascadeVaporesso GT CoreGuardianTarget Mini CCELL coilNRG Tank NRG Tank MiniE Leaf HW Series Geekvape Supermesh Coils Smok TFV8 Baby series Vaporesso GT Core3 more rows
Are aspire coils interchangeable?
Cleito EXO Coils are Interchangeable and Here is What You Need to know - Aspire Vape Co.
When should I add more juice to my vape?
Some people fill when the tank gets half empty (or half full!) whereas others will wait until the tank is completely empty. When your vape really needs refilling you will know straight away---you won't get much vapour, if any, and any that you do get will be very weak in terms of flavour.
How do you fix a disposable vape that won't hit?
Sometimes, a disposable's failure to hit is simply due to an air bubble in the cartridge that's preventing airflow. If this is the case, try tapping or flicking the side of the cartridge a few times, as this should break it up.
Can you refill disposable Vapes?
There is really no reason to fill a disposable vape. Unlike a prefilled vape pod kit, a disposable vape usually cannot be recharged. Therefore, you are taking a risk of wasting your vape juice after filling the device with eJuice and having no way of extracting it.
FundamentalForce Senior Member ECF Veteran
I've really only subohmed on coils I've built myself. Can anyone advise a good flavor/cloud balance on a .3 ohm Atlantis V2? Cheers!
jdawg111 Full Member
Believe it or not aspire came out with a device called the cf sub ohm that was made specifically to go with the Atlantis tank. It pushed 40 watts (non adjustable) and fired from .3 ohms to 1.0 ohm. That is why the v2 coils are now .3 ohm rather than the original.5 that the v1 had.
FundamentalForce Senior Member ECF Veteran
I greatly appreciate your thoughts on the matter. It was interesting hearing the evolution of the coil, and your suggestion of wattage. Have a great one!
Wing Full Member
Like I said aspire (the maker of the Atlantis) made the cf sub ohm device to pair with the Atlantis. It is a 40 watt device. Of course more watts means more vapor but some people like flavor too. And by the way that device was 4.2 volts not 3.6
Wing Full Member
No. The cf is in no way a mech. It is a 40 watt 2000 mah 4.2 volt device. Had a spring loaded connector pin at the top and was made specifically for the Atlantis tanks. Not a mech. Just a non adjustable regulated device that fires from .3 ohms to 1 ohm. The same resistances as the minimum and maximum ohm coils you can get for the Atlantis.
jdawg111 Full Member
My point is that the device was made for those tanks. Anything above what that device puts out will certainly make the tank perform better
Wing Full Member
I suppose the .5 ohm coil that came with the v1 Atlantis brought it to 40 watts. Either way I always found it to be great as far as vapor production.
How to get the perfect vape experience?
After all, with most entry-level vape kits, all you need to do is: Check what wattage you can use with the coil in your device. Adjust your wattage and airflow until you get the vapour, flavour and throat hit you need. Some people want to know more to get the perfect vaping experience.
How many ohms does sub-ohming vape have?
Sub-ohming takes this further by vaping at a resistance of less than 1 ohm.
How to get a vapour hit?
At its simplest level, it’s simply a matter of adjusting the voltage or wattage of the battery until you get the vapour, flavour and throat hit you desire. You can also experiment with using different resistance coils and combining them with different voltages/wattages.
What coils are used for vaping?
Coils below 1 ohm are common, and coils with a resistance of 0.8 ohms are often used for Mouth-to-Lung vaping. Even lower resistance coils, such as 0.15 coils, are often used for cloud vaping. Originally, sub-ohm vaping was reserved for experienced vapers who want to push the boundaries with rebuildable coils.
Why do vapes burn out faster?
You will need to increase the voltage to increase the wattage and get a better vape. Because lower resistance coils use more wattage, they tend to generate more heat. This means they often burn out quicker than a higher resistance coil would.
What affects vapour and throat hit?
The resistance of your coil is not the only thing that affects vapour, flavour and throat hit. It also depends on the amount of power flowing through your coil. There are two common types of vape batteries which allow different amounts of power to flow through your coil. These are variable voltage and variable wattage.
What is the difference between variable voltage and variable wattage?
The difference between variable voltage and variable wattage is a bit like the difference between an automatic and a manual car. With a variable voltage device, you manually control the amount of power (voltage) going through your device.
What is the wattage of a box mod?
The wattage of a box mod, in layman’s terms, is essentially the amount of power you send from the mod’s battery to the atomizer (AKA your vape tank). Higher wattages equal more power, and this, in turn, creates a hotter, more intense hit. And more vapor. If you want those BIG clouds, you gotta run your vape mod at higher wattages.
What is Trailblazer vape juice?
But then I tried Trailblazer which is a tobacco flavored juice that combines butterscotch and peanut butter. It’s rich, sumptuous, and very much an all-day vape and personal favorite of mine. I highly recommend this juice.
What is temp control vaping?
Temp Control Vaping: With temp control vaping, you can lock the maximum temperature you vape at. This ensures you never go over and, therefore, stay well with the comfort zone of your coils.
How much power does a sub ohm tank need?
Most Modern Sub Ohm Tanks Will Not Require More Than 80W – Even The High-Power Ones.
What happens if you prime a tank and load it on a mod?
If you prime your coil and load the tank onto a mod and then crank it up to 200W, one thing will happen: you’ll burn the coil out instantly ( and likely cough your guts up).
Do box mods run batteries?
Box mods also run multiple 18650 cells too, which means battery life is MILES better than it is on pod mods like the JUUL or single-cell mech mods like VGOD Mech Pro.
Can you set e juice to low?
You can set it wherever you like, for instance, if you’re vaping sweeter E Juice, you could set it nice and low, to really juice-out the flavors.