Mech mods use a simple process to produce vapor. The battery is in contact with both the top and bottom caps of the mod, and when it is activated, current flows into the heating coil. This circuit is all that is needed to power the mod and make it possible for you to vape.
What is a mechanical mod vape?
If you’ve ever admired a fellow vaper and their massive clouds or skillful vape tricks, odds are that they were a mechanical mod user. Also referred to as a “mech mod,” this type of vape device is a favorite among vapers in the know.
What are mech mods and how do they work?
Mech mods came from necessity. When Mech mods started gaining popularity, most vape experiences were limited to cartomizers and MTL rebuildable tanks. These were usually powered by a small mod that was either Variable Voltage (like an EGO pen, Wapari). When drippers started taking off, they needed a companion, and mech mods stepped in.
How many watts can you vape with mods?
Now-days there are many regulated mods on the market that can provide in excess of 200 watts. Therefore the need to vape at high wattage is satisfied by both regulated and un-regulated mods now.
How does an atomizer mod work?
The contacts are usually copper or silver plated and the contact is usually held in place with magnets or springs. The switch contact makes a connection directly with your battery. The battery is connected to your atomizer’s 510 connection. When the switch is hit, it completes the circuit and fires the mod.
Are mechanical mods better?
There are advantages of using mech mods. First, the lack of circuitry means that there isn't anything that will break while you are vaping. Second, these mods symbolize simplicity which means you don't need to navigate any menu system to make them function properly.
How do you hit a mechanical mod?
1:4510:17The Heavy Hitter Mech Mod - Timesvape - YouTubeYouTubeStart of suggested clipEnd of suggested clipFire it's just a really smart. And simple way to put a little locking mechanism on the bottom ofMoreFire it's just a really smart. And simple way to put a little locking mechanism on the bottom of your switch. Just screw your copper button down just until it stops.
Is mechanical mod safe?
Before using a mechanical mod (or mech mod) there are a few things to take into consideration. Mechanical mods use lithium-ion batteries, but unlike regulated mods mechanical mods have no safety features (e.g short protection, overcharge protection or overheat protection).
Which is better full Mech or variable mod?
Variable Voltage Mods You are able to alter the voltage, but it is usually limited to under 15 watts. While this performs decently, full mechanical mods can often push 100 watts with the proper batteries and the right build.
Is full Mech vape safe?
One of the most prevalent issues preventing people from using a full mech vape is safety, particularly battery explosion or battery venting. Battery venting can occur whether you are using a regulated mod or a full mechanical vape mod.
How low can you build on a mech mod?
0.2 OhmYes, you can put a coil build below 0.2 Ohm into your RDA and fire it on your unregulated device, but the lower the resistance the more likely it is that you run the risk of a flow of power that can cause the battery to vent, or even in extreme circumstances, cause a thermal runaway.
Can I put a sub ohm tank on a mech mod?
There's no issue using a tank on a mech mod, as long as you adhere to Ohm's Law when choosing the coil size and battery capacity. It's technically possible to connect any 510 threaded vape tank to any similarly threaded mech mod. Just make sure your device is ventilated.
What is Ohm's law vaping?
Simply put, Ohm's law states that you can alter your current and power in your vape by adjusting your resistance and voltage of your device. If increase your voltage or lower your resistance, you will increase the current and more current means more power. More power means more vapor, warmth and flavor.
Why is a vape called a mod?
They were built out of modified flashlight tubes – hence the name – and wooden boxes. An early vape mod was nothing more than threading for an atomizer, space for a battery and a button to activate the device.
How does a mechanical mod work?
Rather, it is pretty straightforward. The battery in the mod is positioned in a way to connect with both the negative and bottom caps of the mod. When the button is pushed by a user, the mod is fired that results in the battery coming in contact with the negative cap, thereof allowing the current to flow into the coil. When the positive cap gets in contact, it results in coils around the wick to heat up, which produce vapor.
What is the difference between a mechanical mod and a regular mod?
One of the biggest differences between a regular mod and a mechanical mod is that mechanical mods are categorized as unregulated mods. Ordinary or normal mods come with built-in chips that are placed between the coil and the battery. The chip is responsible for keeping the vaper safe from any short-circuits or over-discharge of the mod. Regulated mods are crafted in a manner that they can detect issues before they actually take place. On the contrary, evident by the name – an unregulated mod does not come with a chip that will shut the device off if something goes wrong in the mechanical mod. This makes mechanical mods more dangerous to use.#N#Another difference between a regulated and an unregulated mod is that regulated mods cannot be customized. Vapers can only replace the battery once the previous one has expired or change the coil of the battery. Whilst, an unregulated mod can be customized on a number of parameters like adding more batteries, custom RDAs etc.
How do mechanical mods work?
The housing encases the battery where it (battery) is positioned in between the top and bottom caps. The top cap connects to the positive contact while the bottom cap connects to the negative contact of the battery. To fire the mech mod, you need to push the button. In turn, the bottom cap completes the circuit allowing current to flow from the battery to the coil. In tube mech mod vapes, the firing button is positioned at the bottom cap whereas in mechanical box mods the push button is located on the side.
Why do you need to clean your mech mod?
Frequently cleaning is a way of giving your mech mod vape more life and extending its longevity. Besides, it’s a way of keeping your device at the appropriate level of hygiene to avoid bad tastes and unwanted odors. When cleaning your vape, you should be careful and more importantly cautious.
What is a drip atomizer?
An atomizer drips vape flavor into the heating element (coil). The most popular choice of atomizer for mech mods is a Rebuildable Dripping Atomizer (RDA).
What is a mech mod?
A mech mod is an amazingly simple piece of apparatus, far more than a typical layman or inexperienced vapers can imagine. Simply, it’s a vape that supplies pure battery power (electricity) to the atomizer. It’s a basic piece of equipment, simpler than an ordinary vape. It features the most fundamental components you can find in a vape like housing, battery, and atomizer.
How many volts should a mech battery be charged to?
Overcharged batteries are dangerous to your devices and yourself. Mech mod batteries should be charged to a maximum voltage of 4.2-Volt. Also, when using the battery with the mech mod, the battery shouldn’t drain beyond 3.3-volts. You should invest in an appropriate charger. If possible, shop for a better one that indicates when the battery is fully charged.
How long does it take to clean a mech mod?
Cleaning doesn’t take you much time, 10 or so minutes are enough. You should have an eraser, a small reservoir preferably a bowl, a toothbrush, water, acetic acid, and citric acid.
What is an electronic device?
An electronic device is a component that uses power (electricity). Regarding the use of power, safety is very paramount irrespective of the size of the device. A mechanical mod vape isn’t different from any other electronic device as they too use battery power.
How do Mechanical Mods Work?
When the 3 individual threaded sections, the switch, the 510 connector and the housing with its battery are connected together, they form the basis of the mechanical mod.
Why would you want to buy a Mechanical Mod?
As I’ve mentioned earlier, even as little as 5 years ago, if you wanted to vape at say 50 or 100 watts, there were no regulated mods capable of reaching this high power. This could only be achieved by using a mechanical mod.
Why do regulated devices have a control chip?
Because regulated devices have a control chip inside them between the battery and coil, this gives the user control over the wattage you want to vape at.
How many watts does a regulated mod have?
Now-days there are many regulated mods on the market that can provide in excess of 200 watts. Therefore the need to vape at high wattage is satisfied by both regulated and un-regulated mods now.
What is a mod torch?
This type of mod came about in the early 2000’s and was basically a modified flash light (torch). A metal tube providing a secure and safe housing for the battery coupled with a switch to apply the battery voltage to an attached atomizer (tank).
Why is the term "mechanical mod" used?
The term Mechanical mod was used primarily because there were no electronics involved. No wires, no printed circuit boards, no regulation and definitely NO safety features. Their design and operation is purely mechanical and unregulated, hence the name (s).
How many sections can you make to a mechanical mod?
With most mechanical mods, there will be adjustments you can make to all three sections to enable the battery to fit and operate correctly. The idea is to make sure the battery doesn’t rattle around within the 3 sections.
Who are Mechanical Mods For?
For anyone searching for simplicity! For me, that’s the biggest appeal. No screens or electronics. No temperature control. Just hit the button and vape!
How long do mech mods last?
The biggest appeal is the simplicity of these mods. Not to mention longevity. A well-made mech mod will last virtually forever if you keep it clean and maintained because there are no wires or electronics involved.
What was the first tube style mech?
The first “tube style” mechs were modified flashlights! Made from high powered 18650 flashlights, these were usually modified in a way where there was a copper switch added to the bottom, and a drilled out section on top to fit your atomizer. Have you ever wondered where the word “ Mod ” came from? Its because the first cloud chasing vapes were “modified” from other items! This lead to many people becoming “Modders” and popularity took off.
Why are Kennedy mods so expensive?
I know clones are cheaper. But that could easily come at the cost of your safety. The reason a Kennedy Mod costs so much is the superior crafting and quality parts. They are handmade and tested using calibrated machinery. Saving some cash is not worth the risk of your safety.
What is hybrid tube?
A hybrid tube consists of just a few parts. The tube itself, a switch, and the top threading. Tubes come in all shapes and sizes depending on your atomizer. The most popular sizes range from 22mm to 30mm. Switches can have nearly unlimited configurations.
Is a mechanical mod good?
Mechanical Mods have been around almost as long as vaping. Many enthusiasts swear by them, and for good reasons. Using a mech mod can be very daunting at first and there is a ton of things to learn before you use one. There are also many types and they come in all shapes and sizes. Prices and quality vary depending on the mod, though these ones would be a great place to start.
Do mechanical mods have safety features?
With mechanical mods, there are rarely any safety features. This sounds scary, but if you do your research and keep safety first, then you shouldn’t have anything to worry about. First and foremost, it is important to know how to use Ohm’s law. I always build on a regulated device or an ohm reader.
