You can use the dab tool that comes inside of the G-Pen box to help. Once it’s loaded, put the Mouthpiece and sheath over the Heating Chamber again. Turn On The G-Pen and Begin Vaping Using the Method above, turn on the G-Pen. Hold the power button while holding the G-Pen mouthpiece up to your mouth and begin the vaping process.
How do I use the G Pen Pro vaporizer?
Remove the G Pen Pro Mouthpiece by applying pressure to either side of the top while pushing in an upward direction. Load the chamber in full, be careful not to overpack. Once your preferred dried blends have been loaded into the heating chamber, snap the G Pen Pro Mouthpiece back onto the G Pen Pro Vaporizer.
How can I increase the volume of vapor produced from G Pen?
1 A larger amount of ground material loaded will generally create a larger volume of vapor than a small amount. 2 Take long, slow draws from the unit for maximum vapor production. 3 Regularly clean the G Pen Dash Mouthpiece, as built-up residue can largely hinder the unit's performance. More items...
How to use the uwell Caliburn G vaporizer?
Simply puff on the mouthpiece, and it’ll create vapor automatically. If you want to get bigger vapor clouds out of the Uwell Caliburn G, you’ll want to use the manual firing option. To do that, press and hold the fire button before inhaling.
How do I use the MicroG vaporizer?
Using your G Tool, place your desired concentrate in the tank, on and around the coil. Be careful not to be too forceful with the coil itself, as it is delicate and can be dislodged with too much pressure. Once you’ve loaded your desired concentrates and replaced your mouthpiece, your microG Vaporizer is ready to be used.
How do you use the G Pen vape?
1:143:20G-Pen Elite Review & How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo load your unit remove the mouthpiece to expose the heating chamber. Using your Zeus scoop or yourMoreTo load your unit remove the mouthpiece to expose the heating chamber. Using your Zeus scoop or your fingers load freshly ground botanical into the heating chamber snap.
How do I turn on my G Pen vape?
Make sure to charge the G Pen Pro Vaporizer prior to use. Once the G Pen Pro is charged in full, press the power button five times. The unit will stay powered on for four minutes, but you can shut it off before that by pressing the button five times again.
How do I get my G Dash pen to work?
0:585:36G Pen Dash Review & How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust for herb next press the power button five times rapidly to turn it. On press the power buttonMoreJust for herb next press the power button five times rapidly to turn it. On press the power button three times to switch between temperatures.
What do the lights on my G pen mean?
The front LED lights will change color, indicating the temperature setting has been changed. The three temperature settings and their corresponding colors can be found below: Low (Blue) - 375° F / 190° C. Medium (Green) - 400° F / 204° C. High (Red) - 428° F / 220° C.
Why is my G pen blinking?
If you're drawing on your vape, and you see a blinking red light, that means it's time for you to recharge your battery.
Why is my G pen not working?
0:000:35G Pen Connect - Battery Blinking (Troubleshooting) - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the atomizer on your G pen Connect comes loose the battery won't function properly please removeMoreIf the atomizer on your G pen Connect comes loose the battery won't function properly please remove the battery and unscrew the atomizer. Take it all the way. Off then screw it back on tight.
How do I know when my G pen dash is fully charged?
Connect the G Pen Pro USB Charger to the base of the G Pen Pro. Once connected, the front LED lights will activate in a climbing pattern to indicate that a charge is in progress. Once the G Pen Pro Vaporizer has been fully charged, all four LEDs will remain solid.
Why does my vape blink 3 times?
Certain batteries will flash 3 times to indicate a short circuit. Most standard e-cig batteries will have what's called short circuit protection, so when there is a short and you press the fire button it will just blink 3 times and then won't do anything.
How do I change my vape settings?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
How do I adjust the heat on my vape pen?
Most vape pens with buttons require five clicks to turn them on, three clicks to change the heat setting, and five clicks to turn them back off. The button heats the chamber as you hold it down, so be sure to hold the button down as you're taking your hit.
How do you turn on a Snoop Dogg G pen?
0:002:23Snoop Dogg G Pen Instructional Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you hold the button in you'll see the device light up at the bottom and on the button itselfMoreWhen you hold the button in you'll see the device light up at the bottom and on the button itself the top slides off. And inside is where you'll put your dry herbs.
How long does it take for the G Pen to charge?
1-3 hoursThe G Pen Pro Vaporizer will only need 1-3 hours maximum to complete a full charge cycle.
How long does the G Pen dash take to charge?
1-2 hoursThe Dash is powered by a 950mAh battery that takes 1-2 hours of charging time. On a full charge, the Dash is enough to last about 5-7 sessions.
What is the G-Pen?
The original G-Pen is a wax only vaporizer that uses an exposed coil and wicks in order to vaporize your wax. It’s one of Grenco Science’s first products and part of what made them the recognizable brand they are today.
How To Turn On The G-Pen
In order to turn on the G-Pen you have to press the power button 5 times consecutively and rapidly. The same method is used to turn the G-Pen off.
How To Use The G-Pen
Remove the Mouthpiece and the sheath that is attached to it. Now, with the heating chamber exposed, place your wax inside. We recommend a small amount if it’s your first time using the G-Pen. You can use the dab tool that comes inside of the G-Pen box to help. Once it’s loaded, put the Mouthpiece and sheath over the Heating Chamber again.
How to load concentrates into a G pen?
To load your concentrates into the G Pen Connect, first remove the magnetic tank cap by gently pulling upward to reveal the tank underneath. Using any the tool of your choosing, place the concentrates directly onto the center of the ceramic heating element at the bottom of the tank.
How many times can you power off a G Pen Pro?
If you would like to continue using the G Pen Pro after the automatic shut-off feature has gone into effect, simply press the power button five times to restore power and continue use. If you have any further inquiries, please contact our Customer Service Department anytime Monday through Friday, 8:00am to 5:00pm PST.
How long does it take for a G Pen Dash to charge?
The G Pen Dash Vaporizer will only need 1-3 hours maximum to complete a full charge cycle. If you have any further inquiries, please contact our Customer Service Department anytime Monday through Friday, 8:00am to 5:00pm PST. Email: [email protected]. Phone: (800) 948-7480.
How many times does the power button on a G Pro flash?
When the G Pro needs to be charged, the power button will flash 4 times indicating the device is out of power. The power button will show a red LED light when it flashes 4 times. If you have any further inquiries, please contact our Customer Service Department anytime Monday through Friday, 8:00am to 5:00pm PST.
How many times does the G Pen blink?
The G Pen Battery will again blink three times, but will not light up when the button is pressed. If you have any further inquiries, please contact our Customer Service Department anytime Monday through Friday, 8:00am to 5:00pm PST. Email: [email protected].
What to do if your G Pen is not heating?
If your G Pen Roam is not heating, or is displaying a connection error on the LED screen, you can do the following: First ensure the Roam is fully charged. Remove tank and tank cover from battery. Confirm a flush connection between the Quartz tank and tank cover.
Can you use a G pen with a battery?
The G Pen Coil is compatible for use with the G Pen Battery. The G Pen Coil is designed for use with concentrates. The G Pen Coil is not intended for use with ground material. If you have any further inquiries, please contact our Customer Service Department anytime Monday through Friday, 8:00am to 5:00pm PST.
How to get vapor clouds out of Caliburn G?
If you want to get bigger vapor clouds out of the Uwell Caliburn G, you’ll want to use the manual firing option. To do that, press and hold the fire button before inhaling.
What sweetener should I use for Caliburn G coils?
To maximize the life of your Uwell Caliburn G coils, you should try to use only unsweetened e-liquid. Sucralose is the most popular e-liquid sweetener, and it creates a residue when heated that shortens coil life.
How long do Calburn G coils last?
In general, you can expect your Uwell Calburn G coils to last several days each . As you use the coil, you’ll find that the flavor changes over time. At first, you’ll detect a sort of exaggerated sweetness. As you continue to use the coil, you’ll start to taste a caramelized flavor.
How to replace Uwell Caliburn G coil?
Since you install the Uwell Caliburn G coil through the bottom of the pod, you’ll need to remove the pod from the device to replace the coil. Pull the pod straight up to remove it from the device. Invert the pod, and you’ll see the cylindrical atomizer coil on the bottom.
How to charge a Uwell Caliburn G?
To charge the Uwell Caliburn G, connect it to your computer using the included USB-C cable. The charging port for the Caliburn G is on the bottom of the device. As with any vaping device, you should always charge the Uwell Caliburn G with your computer and avoid using the wall adapter for a mobile phone or tablet.
How much battery does the Caliburn G have?
Although it’s about the same size as the original Caliburn, it has a higher battery capacity of 690 mAh – and thanks to the built-in USB-C port, it also charges more quickly.
Can you fill a Caliburn G without removing it?
One of the fun things about the Uwell Caliburn G is that, since the filling port is on the top, you can actually fill the pod without removing it from the device. To fill the pod, wiggle the plastic mouthpiece gently until it comes loose. The bottom of the pod will stay inside the device.
