One of the fun things about the Uwell Caliburn G is that, since the filling port is on the top, you can actually fill the pod without removing it from the device. To fill the pod, wiggle the plastic mouthpiece gently until it comes loose. The bottom of the pod will stay inside the device.
Is the uwell Caliburn G vape pod leakproof?
The designers of the Uwell Caliburn G have done an excellent job of ensuring that the device is virtually leakproof. Unlike many vape pods, the Caliburn G pod fills from the top, which makes it almost impossible for the pod to leak when it faces up.
How do I know when the Caliburn G is charging?
When the device’s indicator light is solid green, the charge cycle is complete. One of the fun things about the Uwell Caliburn G is that, since the filling port is on the top, you can actually fill the pod without removing it from the device. To fill the pod, wiggle the plastic mouthpiece gently until it comes loose.
How do I use the Caliburn G pod system correctly?
Sucking too hard on the Caliburn G’s mouthpiece during use can bring e-liquid into the air tube (or even your mouth). Always puff gently on your UWell Caliburn G pod system.
How do I replace the uwell Caliburn G coil and mouthpiece?
Replace the mouthpiece. If you’re using the Uwell Caliburn G for the first time or have just replaced the coil, let the pod stand for five minutes before vaping. Since you install the Uwell Caliburn G coil through the bottom of the pod, you’ll need to remove the pod from the device to replace the coil.
When should I refill my caliburn G pod?
General rule of thumb is to refill your pod when you notice it's half empty.
How do you refill a caliburn well?
2:009:48Caliburn Pod System by Uwell! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you have to pull the top mouthpiece. Off like so you can see in there you do have two littleMoreSo you have to pull the top mouthpiece. Off like so you can see in there you do have two little plugs for the fill holes. And I'm gonna use some of this carnival iya Immortal.
How many times can you refill a caliburn G pod?
How many times can you refill a Caliburn pod? Each Caliburn pod can be refilled approximately 40 times before having to replace the cartridge.
How do you load caliburn pods?
To fill the pod you'll need a squeeze bottle with small tip. If your juice came in a glass bottle with a dropper, it will be a lot easier to transfer your eJuice into a squeeze bottle. Pull the pod up and out of the Caliburn battery. Set the battery aside.
How do you open a caliburn G pod?
Pull the top cap off and the coil will be located at the bottom of the pod. The coil slots in and out smoothly, making coil changes a breeze. Simply pop the pod back into the device, fill up your device and wait 5 minutes for the coil to prime and you're good to go!
How do you put liquid in a vape?
2:173:37Beginner Vaper Tutorial: How to Fill a Vape Tank - ecsupplyinc.comYouTubeStart of suggested clipEnd of suggested clipHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like soMoreHold the tank on its side slightly to let the juice slide. Down the juice slides right in. Like so once you've filled your tank to their desired.
How long does caliburn G last?
around 1.5 weeks8. How Long Will My UWell Caliburn G Pods Last? Many users report their Caliburn G pods lasting for around 1.5 weeks.
How long does caliburn G coil last?
between 10 – 14 daysThe Caliburn G mesh coils last between 10 – 14 days. Of course, it all depends on e-liquid you use and how often you vape. Compared to other pod systems and their coils, Caliburn has one of the longest life spans.
Why does my caliburn g taste burnt?
It tastes burnt because the wick inside your atomizer coil has dried out and burned up when it was heated. The wick is the part of your vaporizer that soaks up the eliquid from the tank. The wick holds onto this eliquid before it is turned into vapor when the coil heats up.
How do you fill a vape pod?
Simply remove the pod once it's empty, and fill it using the manufacturer's slot and with the dropper of your e-juice bottle. Then give it some time — around 10 minutes is fine — for the wick to become saturated — and replace the pod in the device.
How do you change a caliburn G coil?
Installing and removing the Uwell Caliburn G coil is very simple with its pull & plug system, just simply pull out your old coil from Caliburn G Pod and insert the new coil. Please prime the coil with a few drops of e-liquid on the cotton and let it soak in the liquid for 5 minutes before using.
How do you clean a caliburn G?
If you find your Caliburn auto-firing, the first you'll need to do is remove the pod. From here, thoroughly clean the base of the pod and slot on the device. Use a tissue and a cotton bud to soak up as much residue as possible. After this, leave your Caliburn to sit for an hour or so (without the pod inserted).
How to charge a Calibur G?
HOW TO CHARGE THE CALIBURN G. Using the included cable, charge via a USB port. The light at the bottom will flash slowly, indicating that the device is charging. It will flash red to indicate low battery, flash blue to indicate medium power and it will flash green to indicate sufficient charge.
Why is my Caliburn G battery red?
When the light is red, this is a cue to let you know the battery is low and should be charged. When the red light flashes 10 times in a row, the power is too low and the Caliburn G will automatically shut down. Using the included cable, charge via a USB port.
What is the phone number of Ecigwizard?
We're available Monday to Friday from 9am‑5pm, you can get in touch with us by simply replying to this email, using our live chat feature on the website, or you can give us a call on 0345 305 2585. Liquid error: product form must be given a product. related posts. Ecigwizard Celebrates Its 10th Birthday.
How long to prime a juice pod?
The pod is crystal clear so you have no issues in seeing the juice level. Once finished, simply pop the top cap back on, wait 5 minutes to prime the coil and enjoy! Pull the top cap off and the coil will be located at the bottom of the pod. The coil slots in and out smoothly, making coil changes a breeze.
How to turn off a UWELL Caliburn?
Do turn the UWELL Caliburn off, simply press the fire button five times. To turn it back on, repeat this process, clicking the fire button five times .
Why is it important to keep Caliburn off when not using?
Keeping the UWELL Caliburn switched off when you’re not using it will save you precious battery life and also ensure the device doesn’t accidentally fire in your pocket, which can be dangerous. It doesn’t take long to do this, so I like to keep mine off whenever I’m not using it.
Can you buy a Uwell Caliburn in the USA?
Once you’ve done these, however, you’ll be vaping like a king in no time! You can no longer buy the UWELL Caliburn in the USA, thanks to the FDA, but if you’re in the UK the UWELL Caliburn can still be found online fairly easily.
Is the UWELL Caliburn a pod?
The UWELL Caliburn is a small, svelte pod vape. For this reason, its battery isn’t that large. It’ll go most of the day with minimal usage, but if you’re a heavy vaper you’ll definitely want to give it a top-up of power mid-way through the day. Fortunately, this is really easy as the UWELL Caliburn charges via USB, ...
2. What Features Does the UWell Caliburn G Share with the Caliburn A2?
The Caliburn G and Caliburn A2 are both fillable from the top and have two selectable modes: button-activated and draw-activated. Both pod systems also use 2mL pods.
4. How Long Will It Take to Charge My UWell Caliburn G
Thanks to the USB-C fast charger that comes with the device, the UWell Caliburn G can recharge fully in approximately 45 minutes.
5. Can I Use a Different Charger to Charge My UWell Caliburn G?
Using a charger other than the one supplied with your Caliburn G is not recommended. Using a charger rated for too much power or voltage can damage your pod system’s battery and permanently affect its performance.
6. Can I Adjust the Wattage on My UWell Caliburn G?
The UWell Caliburn G is not a variable wattage device. It’s maximum output is set to 18W.
7. How Do I Know When My UWell Caliburn G Is Charged?
The light at the bottom of the Caliburn G flashes slowly in the following colours while the device is charging at various stages:
8. How Long Will My UWell Caliburn G Pods Last?
Many users report their Caliburn G pods lasting for around 1.5 weeks. However, your experience will vary depending on your usage habits.
10. Why Is My UWell Caliburn G Leaking?
The UWell Caliburn G is designed to be leak-resistant. Most leaks will only occur if you are using the device improperly. For example:
Detailed Instruction
Click the fire button 5 times in 2 seconds to turn on/off the device, the LED will flash green 3 times.
Protection features
If the draw-activated mechanism fails, the program will automatically stop the draw-
Troubleshooting
To fill your Uwell Caliburn, simply remove the plastic mouthpiece at the top of the device which will allow you to access the to fill holes. Simply insert the tip of a bottle of e-liquid into one of them to fill holes and gently squeeze. Be sure not to use the center hole, as this is the airflow hole.
