Once you’ve connected a tank with a stainless-steel coil to your device, switching to temperature control mode is usually as simple as selecting that vaping mode in your mod’s menu.
Full Answer
How to vape in temperature control mode?
To vape in temperature control mode just attach the tank to your mod and select the TC profile from the menu or via the shortcut specified in the manual. Then you will need to lock the resistance at room temperature. This is another very important aspect on which depends the whole experience.
Is there a device that can control the temperature of stainless steel?
However the device allows the user to change the coefficient of the wire so the device can temp control it and stainless steel has a very different coefficient than either nickel or titanium, so I would imagine that most temperature control devices on the market now would not do very well with it.
What is the best material for vaping with temperature control?
The most commonly used materials for vaping with temperature control are: Nickel, Titanium and Stainless Steel. Stainless Steel is considered to be the safest from this lineup and it’s also the only material that can be used in both Variable Wattage and Temperature Control modes.
How does a temperature control mod work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature.
How do you vape with temperature control?
How to vape in TC. Put your mod into TC mode and select the corresponding wire type for the coils you have. If the mod has a TCR you can enter the exact TCR value. After that, ensure that your mod and tank are both at room temperature so the temperature readings will be more accurate.
What is the SS setting on vape?
Stainless Steel Mode (SS Mode) It shares nickel and titanium's fast ramp-up speed, but does not oxidize when dry burned, giving you more ability to adjust your coils when they're heated. Stainless steel is also not known to cause any adverse allergic reactions.
What temp should my vape mod be at?
390 F to 490 F.The best temperature to vape e-juice is in the range of 390 F to 490 F. The sweet spot for many temp control vapers is 420 F. Most temperature control vape mods have the capability of 200 F to 600 F. However, at higher temperatures the vapor can be very hot.
What is TC TI mode vape?
TC mode is like a car that allows you to put the pedal right down, but you can also gently tap it to move the vehicle ahead slowly. With some mods you can set a custom curve, allowing you to control the speed and rate at which a coil is ramped up. This is a huge leap forward for the vaping industry.
What is temperature control mode?
Temperature Control (TC) mode allows you to set a specific temperature value on your mod at which your e-juice will be vaporized. Your mod will adjust its power output according to the set temperature value so that the coils temperature will remain constant and under control.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
What wattage should I vape at 0.2 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
What wattage should I vape at 0.4 ohm?
0.4 ohm RPM Mesh Coils feature a honeycombed mesh design and are best for flavour seeking vapers. Recommended Wattage: 25W.
What wattage should I vape at 0.15 ohm?
60-90 wattsIn contrast, the 0.15ohm dual mesh coils have a best recommended wattage of 60-90 watts. Both atomisers offer huge clouds and flavour production. Since these coils are sub ohm / direct to lung (DTL) in vaping style, they are recommended for use with higher VG e liquids.
What does A and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
What does TC mode mean?
Temperature ControlTemperature Control (TC) is the mode through which the box/mod regulates the intensity in order to keep the coil at a temperature that is defined by the user.
What does TC NI mean?
First Time Temperature Control Setup: Depending on your vaporizer, it may have a single TC Vape Mode that supports both Nickel (Ni) and Titanium (Ti) coils, or it may have a specific Temperature Control Mode that must be set to support either Nickel (Ni) or Titanium (Ti) coils individually.
How to vape in temperature control mode?
To vape in temperature control mode just attach the tank to your mod and select the TC profile from the menu or via the shortcut specified in the manual. Then you will need to lock the resistance at room temperature. This is another very important aspect on which depends the whole experience. There’s no default way to do it, and each manufacturer has its own button combination to lock the resistance. Therefore we recommend reading the manual first or checking out some reviews.
What is temperature control in vaping?
Temperature control is probably the most important innovation in vaping since the first variable voltage/variable wattage devices. It involves setting a maximum temperature for the vape that the coil will not exceed. When the mod detects that the coil is close to reaching the set temperature it begins to act as a limiter and it gradually decreases the wattage. It’s the same as thermal throttling inside your laptop.
What are the two things you need to experiment with temperature control?
To experiment temperature control you need two things: a box mod that’s TC enabled and a coil made from Nickel, Titanium or Stainless Steel.
What material is used for vaping?
The most commonly used materials for vaping with temperature control are: Nickel, Titanium and Stainless Steel. Stainless Steel is considered to be the safest from this lineup and it’s also the only material that can be used in both Variable Wattage and Temperature Control modes.
Why are Kanthal and Nichrome not compatible with TC?
Kanthal and Nichrome two the most popular wires used in vaping are not compatible with TC because their resistance stays the same regardless of temperature.
What temperature should e-liquid be?
Some people like cooler vapor so they set the value to 300 - 350°F. Others like it a lot warmer so they go up to 500 - 530°F.
How does TC work?
Temperature control or TC works by using a notion called the thermal coefficient. The thermal coefficient is a property of certain materials to have their electric resistance increases or decrease depending on the temperature. Therefore by reading the resistance multiple times a second, the mod is able to also precisely estimate coil temperature. By doing this it knows when the temperature is about to reach a certain value and adjusts the output accordingly.
Choosing Coils
Today, there are a wide range of coils available specifically for temperature control devices. For the most part, you will be working with Ni200 or Stainless Steel (SS316L) coils. Hopefully, you checked your device before you brought it home to ensure you have the correct type of coils on hand.
Selecting Your Mode
The next step in your setup process is to select the temperature control mode you will be using. Depending on your device, this can go several different ways. You may need the assistance of your user manual to figure out the menu for the first time.
Base Settings
In order to ensure that your device is functioning properly and that all temperature control operations are accurate, you first need to lock in your resistance at room temperature. Setting a base line temperature without electricity going through the coil will establish all temperature sensing as your coils heat up.
Getting in the Groove
If you are working with a high powered device like the Vex 150 TC Mod, you have plenty of room to work with, so start slow and take your time. At each interval, stop and take a few hits.
For Next Time
Now that you have set up your temperature control device successfully for the first time, you’ve got a good feel for the way it’s done. It may be slow going at first, but you will get familiar with the menu quickly and soon you will have a good idea of what settings give you the best results so you can narrow down your search for the perfect vape.
How does a vape mod work?
Instead, they measure the changes in your coil’s resistance. When a coil heats up its resistance generally increases your kit will track these changes and assign a temperature value to them. For example, a shift in resistance from 1.1 Ohm to 1.2 Ohm can mean an increase in temperature from 120 to 130 degrees Fahrenheit.
Why do you need TC vape?
The major benefit of TC vaping is that it stops your coil from running too hot. This in turn ensures your coils last longer as they won’t burn out prematurely, while also making sure your RDA/tank avoids any damage. Keeping your coils in good condition also means that you can maximise their lifespan , for a more cost-effective experience overall.
What is temperature control?
Temperature Control gives you the ability to set a maximum temperature your coils will reach and your vape kit will alter the power output to ensure that coils never reach beyond the set limit. Temperature control mode was developed to stop the occurrence of burnt coils or ‘dry hits’, when used properly your coils will never run too hot and subsequently will never burn.
Why is it important to keep coils in good condition?
Keeping your coils in good condition also means that you can maximise their lifespan, for a more cost-effective experience overall. The option of programming a temperature also gives you control over the style of vape you’ll experience. A lower temperature can be used to experience a longer, cooler inhale; whereas a higher temperature can be ...
Do you need TC mode for Kanthal?
You’ll need a kit or mod programmed with TC mode in order to experience Temperature control vaping. As well, you’ll also need compatible coils. The majority of vape coils use Kanthal in their construction, Kanthal does not work with TC mode as its resistance does not change when it heats up.
Do coil wires react to heat?
Different coil wire types will react to heat and their resistance will increase at a different rate. It is for this reason that each TC mod and kit will have different modes available to support these common wire types. It’s always important though to always check compatibility and manufacturer guidance before use.
Can you unlock different notes in TC mode?
By using TC mode correctly you can unlock different notes of your e-liquid that may have remained hidden. You have the opportunity to experiment and experience the very best of your e-liquid.
What temperature does banana vaporize?
For the flavor of banana, isoamyl acetate is vaporized at 142°C (or 288°F). Benzaldehyde (cherry taste) boils at 178°C (or 352°F) and cinnamaldehyde (cinnamon taste) at 248°C (478°F).
How to make coils?
It is possible to build your own coils by purchasing a roll of resistive wire and to fashion it yourself. Take a small cylinder (a precision screwdriver is a good starting point) and turn your wire around it. Generally 6 turns are good.
Why is Kanthal not temperature controlled?
The reason why Kanthal does not allow temperature control is because this FeCrAl alloy has much more impurities than any others and does not offer superconductivity properties (a linear relationship of resistance with temperature).
What is coil wire?
A coil is most of the time a resistive wire that is folded in a spring-like cylinder with non-touching circular turns. The wire’s resistivity (in Ω.m -1) defines how strongly a given wire, generally an alloy, opposes to the flow of electrons, or electric current.
What does R mean in a coil?
As a general rule, the resistance (R) of a coil increases with temperature (T). In the temperature control mode, the chipset of the box measures on a very fast rate the resistance when incrementing intensity levels. The chipset basically increases the intensity of the current up to reaching a certain value (R) of the resistance. This setpoint value (R) corresponds to the desired temperature (T).
What is TC in a box?
Temperature Control (TC) is the mode through which the box/mod regulates the intensity in order to keep the coil at a temperature that is defined by the user. According to the manufacturers, maintaining the temperature constant is the guaranty of more safety but this argument is sometimes misused since, for example, no indication is given, neither on devices nor on juice bottles, regarding the temperature to use.
Why is it important to avoid contact between the turns in an electric circuit?
It is also important to avoid contact between the turns because the electrons that are in motion when the electric circuit is closed always choose the most direct way to go from one electrode to the other.
How Does Temperature Control Vaping Work?
The purpose of TC vaping is to limit the temperature of the coil in your vape tank, thus minimizing the chance of a burnt wick or dry hit. When you use temperature control mode, you define the maximum temperature that your coil should be allowed to reach. Your mod then monitors the coil temperature as you vape.
What Happens When You Put Your Mod in Temperature Control Mode?
When you put your mod in TC mode, you’ll need to configure two things: the maximum temperature that the coil will be allowed to reach and the “preheating wattage,” which basically determines how quickly the coil will reach that temperature.
What Equipment Do You Need for TC Vaping?
To vape in TC mode, you need two things. The first item – as you probably already guessed – is a vape mod that supports temperature control vaping. As we mentioned above, temperature control is a feature that’s implemented in firmware.
What Are the Pros and Cons of Temperature Control Vaping?
Let’s talk now about the experience of using a TC vape mod in temperature control mode. TC vaping definitely has its benefits, and there are definitely plenty of people who prefer temperature control over wattage-based vaping.
What screws do you put in a mod?
Aren't almost all of them? The deck/coil screws into the base, the base screws into the mod.
Does bellowv2 work with nickel?
Having the bellowV2 it does work really well in TC with nickel. The downside is you have to wrap the coil either contact coils or very tightly for spaced coils. That buildeck barely has enough space for a fart.
Can pipeline pro 2 temperature control stainless steel?
In Phil Busardo's latest video reviewing the pipeline pro 2 he talks about it being able to temperature control stainless steel. However the device allows the user to change the coefficient of the wire so the device can temp control it and stainless steel has a very different coefficient than either nickel or titanium, so I would imagine that most temperature control devices on the market now would not do very well with it. However, I do not own a temperature control mod so I could be wrong.
Can you use temp control on SS wire?
Not a whole lot of reasons to use temp control on SS wire since it vapes so cool. The only thing it would be good for is dry hits.
What does temp control do in vaping?
Temp control lets you adjust the temperature at which your juice is being vaped…a higher temp might bring out nuances of flavour you never thought possible with a particular juice. On the other end, a lower temp could stop you burning your juice and ruining the subtler notes in the flavour. Indeed, you’ll find that keeping temp down on a minty juice enhances the cooling effect.
What is TC mode on a vape?
Basically, TC mode will allow you to vape safely on a given coil type, within boundaries, pre-programmed boundaries. The boundaries are set in degrees celsius or Fahrenheit. Vaping outside these bounds will be limited by power drops or cut outs and basically, you and your coil will be kept safe from dry hits and a world of pain.
Why are Kanthal and Ni80 not on the TC list?
Kanthal and Nichrome are not on that list because their coefficient is so extremely low. Because Kanthal (Ka1) and Nichrome (Ni80) barely change at all when heated, they are useless in TC mode. You see, your mod USES resistance readings in coils to determine temp changes, because it has no internal thermostat.
What does it mean when an atomizer is heated?
An atomizer that has been used on another temperature control device which has been heated up will mean you get the wrong base temperature for it on a new device and this can cause you lots of issues.
What is the best feature of Ti wire?
One of the greatest features of Ti wire is, as you can imagine, the durability of your build once you’ve built it. Not only will your fancy coiling hold its shape, it will make the build into a tricky deck with ease.
How does a mod use predictability?
Your mod uses this predictability to its advantage by reading those resistance changes and then using the values to determine future changes and set the TC accordingly.
Why is temperature control important?
One of the most useful features of temperature control is that it allows for flavour adjustment, refinement and enrichment. Think of the way coffee smells when it’s being roasted and get the idea. Some flavours sing when they are warmed, some…like natural fruits, become sweet and even sickly.