Turn On The Vision Spinner 2 Turn on the Spinner 2 by using the method above. Once you see the lights, you’re good to go. Begin Vaping Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2.
Full Answer
How to use a vision spinner 2 atomizer?
· Press and hold the menu button and the minus (-) button to power on the unit. When the greeting message appears and you hear the beep, you can let go. (There are 3 volume settings or it can be muted altogether.) Notice that you have to hold the buttons down for several seconds while a timer counts down on the OLED screen to show the power-on delay.
How to vape with a vision spinner?
· Turn on the Spinner 2 by using the method above. Once you see the lights, you’re good to go. Begin Vaping; Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
Is the arizer Air 2 the best portable vaporizer?
· The smileomizers are fairly standard fare from a technology standpoint. They’re traditional cartomizers with absorbent filler material. Lots of filler material. The large Zeus’ extra size allows for an impressive 6ml of e-liquid capacity. In place of a drip tip is a rubber tip that unscrews for cartomizer filling.
What is the best ratio for e-liquid?
Pick an e-liquid with a ratio of 80/20 PG/VG or 100%PG if you want your vapor to have more flavor and a stronger hit.
How to unlock Vision Spinner 2 battery?
To lock or unlock the Vision Spinner 2 battery, press the button 5 times within 1.5 seconds. The LED light will flash to confirm each action. When the battery is in lock mode, the power button is disabled. Charging time – Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all. Spinner II, no different to regular eGo batteries, requires a standard USB charger of 420mA output and a wall adapter of 500mA output.
What is a vision spinner 2?
What is the Vision Spinner 2? The Vision Spinner 2 is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery. Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
How to turn on a vision spinner?
How To Turn On The Vision Spinner. As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink its lights a few times. This method allows for the Battery to output a higher temperature ...
How long does it take for a vision spinner to charge?
Like other e-cigarette batteries, you should always give your Vision Spinner an initial charge of at least 4 hours, even if it appears fully charged or is already holding some charge. This conditions the battery and ensures a longer battery life overall. Once the battery is conditioned, you will typically need to charge a low battery for three to four hours.
Why won't my cleromizer fire?
If it’s only flashing 2 or 3 times and won’t fire it’s because you have tightened the cleromizer too much which has caused a short in the head. Give it about a 1/16 turn back and all should be good. When connecting to a charger the light on the battery will turn on and the USB charger will flash from green to red to green again. This cycle will continue until the battery is charged and at that time the light will only be green. Also of note, the light on your battery will go out about an hour to an hour and a half before the battery is fully charged.
Where is the power button on Vision Spinner 2?
Power Button – Found on the face of the Vision Spinner 2, it’s used to turn the Spinner on and off. Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
How many volts does a cartomizer battery have?
Whichever version you choose, you’ll get a battery that outputs 5v to the cartomizer compared to the 4v or less of most big-brand devices. There will be more on this in the performance section on page 2.
Do smileomizers have a higher voltage?
Smileomizers run at a higher resistance, so there’s no problem with the voltage on those. The smileomizers are fairly standard fare from a technology standpoint. They’re traditional cartomizers with absorbent filler material. Lots of filler material.
Can you use a KR-808 on a V4L?
The battery itself uses KR-808 threading like all of V4L’s product line. That means you can use many standard 808 cartomizers, but not using the Smileomizers with the Zeus kind of kills the cigar experience.
How to fill a smileomizer?
You simply use a dropper or syringe and put in 30 drops, wait 5 minutes, add another 30 drops, wait 5 more minutes, add another 30 drops, wait 5 more minutes and then vape away. After that, you add additional drops as needed. Although you can vape right off the bat, I found that after filling a brand new Smileomizer, the flavor really came out after leaving it sit and "steep" for a day or two. I suppose this is because it had adequate time for the liquid to be fully absorbed by every little bit of the polyfill.
What is a smileomizer?
One of Vapor 4 Life's very unique products is their "Smileomizer." This device is intended to "bring a smile to your face." It holds plenty of liquid, is very easy to fill, produces large clouds of vapor and tastes great when filled with your favorite e-juice. Coupled with a V4L Dial-A-Volt battery, this device was designed for people who like to chew or bite on cigars. " I wanted a cart that I could chew on, held tons of juice, and could be used with all my batteries," writes Steve Milin. The Smileomizer comes through, offering the user a very cigar-like experience.
What size battery does a Smileomizer fit?
The Smileomizer has a KR808 thread as it is designed to fit on any of Vapor 4 Life's batteries which all are KR808 threaded devices. The small Smileomizer holds 3.5 ml of e-juice and the large smileomizer holds 6 ml of liquid. Each can be refilled twelve or more times. The large Smileomizer is wider in diameter than the small Smileomizer. The large version was designed to work with Vapor 4 Life's XL Vapor Zeus Batteries and XL Dial-A-Volt Batteries, while the small Smileomizers were designed to use with the small and medium Vapor Zeus Batteries and small, medium, and large Dial-A-Volt Batteries.
How many ohms is a smileomizer?
The Smileomizer utilizes a single vertical coil that is rated at 2.5 ohms that was designed to deliver the best balance of flavor and vapor production possible, while allowing you to use the full range of voltages available on the Dial-A-Volt.
Does Smileomizer last longer?
As with any coil or atomizer, it has been reported that Smileomizers last longer with some flavors, and not as long with others. A nice clear liquid will help make your Smileomizer last a longer amount of time, while darker liquids like caramels and coffees may cause it to clog up prematurely.
How does Airvape work?
The display indicates precise temperature changes, the heating process, and battery life. You can see the temperature levels changing on the screen by pressing the temperature control buttons. You can change from degree Celsius to degree Fahrenheit.
How to charge Airvape X?
To charge it, connect the USB cable to the USB port on the vaporizer. Then connect the charger to a power socket. Let it charge to full power.
Why put a drip tip on Airvape?
Adding a rad drip tip on the mouthpiece from Airvape will add style and functionality. If you vape daily, saliva, tiny objects, and vape remnants will block your mouthpieces. An extra mouthpiece helps in long term maintenance of your vaporizer.
What is Airvape X?
Airvape X is a personalized handheld vaporizer. A brand and product owned by the Apollo Airvape company. It allows users to vape nicotine, CBD, and THC extracts.
How many buttons does an Airvape X have?
Airvape X vaporizer comes with three buttons. Two temperature precise control buttons and the power button. The temperature adjustment system is precis. It gives users complete control of heating. The power button is in the middle of two buttons for adjusting the temperature.
What temperature does a vapor chamber release?
The heating chamber temperature rises to a maximum of 220 0 C to release vapor.
How to tell if Airvape is heating?
To know if it’s heating, check if the animated fan on the screen is spinning. A fan spinning indicates the Airvape is heating.
How to inhale vape?
The first step when inhaling your vape is to purse your lips around the mouthpiece. Make sure you don't leave any gaps between your lips and the mouthpiece. Why? If you leave gaps, you won't draw in the vapor correctly, defeating the entire purpose.
How to breathe in vape vapor?
Draw in the vapor slowly, hold it in your mouth for a couple of seconds, and open your mouth to breathe it into your lungs. You can exhale once the vapor is in your lungs. This technique is ideal if you’re using vapes that contain higher nicotine dosages. And if you like to enjoy the flavor of the vapor.
How to avoid burning your taste buds when vaping?
You might also burn out your taste buds, which is referred to as a vaper’s tongue. Instead, stick to 3-7 draws from the vape at a time, and give yourself at least a couple of minutes to cool off.
Is vaping safer than smoking?
For older vapers, switching to e-cigarettes is a way of weaning off traditional smoking. After all, research does prove how vaping is a much safer alternative to smoking a cigarette.
Can you smoke a vape like a traditional cigarette?
The first one is smoking a vape like you would when smoking traditional cigarettes. E-cigarettes aren't designed for drag smoking. If you smoke a vape like a traditional cigarette, you risk winding up with excessive e-juice in your mouth, which can be a rather unpleasant experience.
Is vaping increasing?
However, the opposite is true for vaping. There has been a sharp increase in vapers, both young and old.
Is vaping good for recreational use?
Whether you’re vaping for recreational purposes or weaning yourself off smoking, it’s important to use the correct technique at all times. Your vaping technique will largely depend on the type of device you use. But regardless of the technique or device you use, remember to avoid short drags. Also, remember to take breaks in-between for an optimal vaping experience. Learn more about where CBD comes from here.
madglee Senior Member ECF Veteran
The Vapor Zeus quickly became my favorite mod many months ago. I cannot replicate the throat hit, the strength, or the draw with any of my other mods and I love its look.
K9Luvr Ultra Member ECF Veteran
Madglee, how are you filing your smileomizers? and what size are you using? Sounds like you aren't getting enough juice in them. I use them exclusively with my DAVs, use a syringe to fill them. The trick is to make sure you don't flood the wick.
NicoHolic Ultra Member ECF Veteran
I don't know about smileomizers, but AFAIK, they're just big cartomizers. I have juices (NETs) that can clog a carto in as little as six hours use. Dark, thick, sticky juices are hard on cartos. They also require more rewicking and dry burning in RBAs. And I have lightly flavored 50/50 that'll let a carto last two weeks or more.
NimrodAUS Full Member
I had similar dramas, I too love the zeus and smilomizers for flavour, hit and look. I have 3 cigar batteries. At first I was having this drama. What I do, is fill with a syringe down the side where there usually is a tiny gap where the end of the wrap of filler is, I fill with about 3.5ml of juice for the small smilomizers.
madglee Senior Member ECF Veteran
Thanks for all the replies. I DO usually use Coffee flavor from V4L or others. I generally fill it with the dropper until it stops draining, then blow out the excess. I have never tried a syringe; I am not even sure I can buy syringes here.
SMP0119 Full Member
Another cause that cannot be avoided is ambient particulates collecting in the tube. I've had this problem also and noticed something interesting during a cleaning. While cleaning a carto once, I ran a micro swab through the center tube and it came out black.
madglee Senior Member ECF Veteran
Well, here it is six months later. Apparently, the smileomizers are hit or miss. The last few 10 packs I bought were great. Each smileomizer lasted about 4 days. I just bought a new 10 pack, though, and I'm going through 2 or 3 per day. After one or two fills they just clog up, and I'm not using dark liquids.