how to pack a concentrate vape coil

• Step 1) Prepare your concentrate for loading by gathering a small amount on the end of a dab tool. With most pens you’ll...
• Step 2) Gently apply your concentrate directly on top of the coil, and be extra careful not to actually touch the coil...
• Step 3) “Prime the wick” before you start vaping, which melts your wax down onto and around the coil which helps the pen...
• Step 4) Vape it up!!

Full Answer

How to use the best vape coils?

The best quality vape tanks, found at Mig Vapor, are precision engineered and the coils thread easily into place. Once the coil is inserted, place a couple of drops of e-liquid through the top opening of the coil directly on to the cotton material. Then, also place a drop or two of e-juice into the juice ports on the side of the coil.

What are vape concentrates and how do they work?

They are used by vapers looking for a clean, powerful hit but will also burn through your concentrate that much faster. As mentioned, if you’re into convection heating (no direct contact with the heating elements), you can get a vape pen with a ceramic or quartz dish onto which the concentrate is placed.

How do you mix vape oil with vape concentrate?

Once you get home,put a small pot of water boiling. In a shot glass,put your concentrate and e-liquid together. You will use 2ml of vape oil for every 1gm of concentrate. Put the shot glass into the boiling water and stir the concentrate and e-liquid together until FULLY blended.

What are vape coils made of?

A vape coil is a cylindrical device that contains the atomizer wire and wick in one piece. The atomizer coil itself is made of metal. The most common type of metal used is Kanthal. Although other metals such as stainless steel or nickel are used for temperature control vaping. The metal coil resembles a coiled spring.

Do you put wax directly on coil?

You can add it onto the coil. The coil at this point should be wet and waxy so it will only give you a bigger hit. We recommend you do not use a variable voltage battery on your wax chambers since they can burn it out. If you only have a variable voltage battery, put it to the lowest voltage, which is usually 3.2V.

How do you load a concentrated cartridge?

Concentrate should be placed directly on the heating element. To prevent clogs, be careful not to overfill the chamber. A portion of concentrate about the size of a peppercorn is a good starting point. Using a dab tool to load the unit is recommended due to the stickiness of many concentrates.

How do you load a wax atomizer?

0:212:51Shatterizer Wax Pen Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing your loading tool load a small amount of wax. Directly onto the coil. And then replace the capMoreUsing your loading tool load a small amount of wax. Directly onto the coil. And then replace the cap. Then carefully slide off the atomizer. Cover from the atomizer base.

What voltage should I use for concentrates?

For pre-filled oil cartridges, set your pen to 3.3V. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it's not giving you enough of a hit.

Whats the difference between vape and concentrate?

The main difference between these three types of pens is the concentrate they use. Vape pens are limited to cartridges with refined marijuana oil. On the other hand, wax pens can vape thicker concentrates like rosin and shatter.

How do I get the last out of my vape cartridge?

5 Ways To Use The Last Drop Out Of Your THC CartridgeHeat And Spill. Before you can use the last drop out of your THC cartridge you'll have to get it out. ... Twax A Joint. Another one of the ways to use the last drop out of your THC cartridge is to twax a joint or blunt with it. ... Dab It. ... Pour Into A Drink. ... Toss It In A Bowl.

How do you use a atomizer concentrate?

0:212:51Shatterizer Wax Pen Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipCover from the atomizer base. And screw the loaded atomizer into the threading replace the coverMoreCover from the atomizer base. And screw the loaded atomizer into the threading replace the cover click the button five times quickly. And you are ready to vaporize.

How much wax do you put on coil?

With most pens you'll want to load a BB-sized amount at a time, or approximately 0.1g. Depending on the consistency of your extract and the depth of your coil you might even be able to put a little on the tip of your finger to load it.

How do you use a vape concentrate?

Get ready to vape: When loaded, screw the mouthpiece back onto the battery/heating chamber. Inhale and enjoy: Press the button on the unit or battery to heat your concentrate. Inhale when the concentrate has been vaporized. Release the button on dab pens or portable vape pens when you're done inhaling.

What wattage should I vape at?

On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.

What should my vape settings be?

As a general rule, dab temperatures are set between 315℉ to 900℉. Below 315℉ is usually too low to vaporize cannabis concentrates. And above 900℉ can release carcinogens as well as a harsh, burnt vapor.

How do you vape thick oil?

0:142:16Pulsar Go Series Thick Oil Vape Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe mouthpiece from the unit by pulling it off and then drop the loaded cartridge into the unitMoreThe mouthpiece from the unit by pulling it off and then drop the loaded cartridge into the unit replace the mouthpiece. Start inhaling and you are vaping. The Pulsar go series thick oil vaporizer.

How to Get Best Hits from a Flower Vape

There are two main contributing factors that will help you achieve the best possible clouds when packing your dry herb vape. The first is how tightly you should pack the herb into the heating chamber and the second is how fine you ground the herb.

Aim for a Fine Grind before Packing Your Herb

The most important thing to remember is that it takes practice and patience to learn how to properly use and how to pack a dry herb vape to maximize vapor production. Ultimately, you need to determine which packing approach best suits your inhalation style and your specific vaporizers heating method.

How to Pack a Dry Herb Vape Properly

The most common issue we encounter with individuals experiencing problems with their devices is over or under-packing the vaporizer. Properly packing a dry herb vaporizer is so crucial to the overall experience that we can’t emphasize enough the importance of doing it correctly.

How much should I pack in my Dry Herb Vape to get the best results?

While most vapes require you to fill them practically to the brim, some require a little more room at the top and only need you to fill them 70% or 80% of the way. Fact of the matter is, it’s just a trial and error learning process.

Which Dry Herb Vaporizer is right for me?

When done correctly, vaping is a really delightful experience. This means that if you want to get the most out of your herbs, you need to know how to grind and pack them properly. And if you love vaping, but you’re stuck with an older or lower-end model, it might be time to look into what newer vaporizers can provide you.

What are Concentrates?

A concentrate is any product made from Marijuana that only has cannabinoids and terpenes in a high concentration, while the undesirable elements have been filtered out.

Types of Concentrates for Wax Pens

While wax is the most popular variety of cannabis concentrate, it is not the only option. There are many other types that are named according to their appearance.

Types of Concentrates

Shatter: Shatter, named so due to its glass-like consistency is a concentrate that has a brittle texture and is amber or golden yellow. It is slowly becoming more popular than wax due to the ease of micro-dosing it, which can be very effective for newbies. You can snap a little bit of shatter and use it with the dab pen without making a mess.

What is a Wax Pen for Dabbing Concentrates?

A wax pen is a vaporizer designed to mimic the style of an actual pen. It is extremely compact and uses a conduction or convection method to heat the concentrate.

How to use a Wax Pen Vape

A wax pen has three primary components. There’s a mouthpiece, a heating coil or the atomizer and a battery. All three are connected using universal 510 threading which allows them to be connected and disconnected with ease.

Things to Watch out for When Buying a Wax Pen for Dabbing

Select the atomizer depending on the type of concentrate that you wish to use.

Need More Help? Ready to Check out Your Options?

At Hemper.co our selection of smoking and vaping devices and accessories are hand-created by our team of experts who love their herb as much as you do. Check out our online shop today or reach out with any questions you might have. We’d love to help make your next sesh something special.

What is a concentrate vape pen?

Concentrate vape pens, such as dab vaporizer pens and wax vaporizer pens, are by far the most common way to inhale evaporated botanical extract. In essence, they are very similar to other vaping pens used for dry herbs and e-liquids, with a few minor adjustments made to the atomizer.

What is the heating method used to make a vape?

However, if a flat plate is used then the concentrate doesn’t touch the heating element. The heating method used there is called convection heating – hot air heats the concentrate resulting in a more even vape.

What are the benefits of vaping?

That’s a fair question. There are dozens of great dry herb vaporizers on the market. For the most part, they are affordable and practical, so why would you want to switch from them? To answer that question, let’s take a quick look at the overall benefits of herbal concentrate vaping: 1 A more potent vape 2 Intensive flavor 3 More discreet vape

What is an atomizer?

An atomizer is a piece of your vaporizer that contains the heating element. It’s also where you put your concentrate – it can be placed directly onto the heating element or in a flat plate above it. There’s a difference between the two approaches. The first approach uses the conduction method of heating.

Why are concentrates more powerful than vaporizers?

As the name implies, concentrates are more powerful than run-of-the-mill dry herb vaporizers because more active ingredients are packed in a smaller amount used for vaping. This is a huge benefit to medical marijuana users who need to inhale (or ingest) larger quantities that are prescribed by their doctor.

What are the different types of concentrates?

Generally, there are four types of concentrates (or dabs), each with a varying potency. They are shatter, crumble, budder, and wax. In addition to differing potency, they will also vary in flavor and consistency. Shatter – the most potent type of concentrate with up to 80% purity.

Can you use a ceramic vape pen with a quartz dish?

As mentioned, if you’re into convection heating (no direct contact with the heating elements), you can get a vape pen with a ceramic or quartz dish onto which the concentrate is placed.

What are the parts of a vape pen?

Named for their thin, cylindrical shape that often resembles an ink pen, vape pens are small personal vaporizers designed for cannabis concentrates. Many units include these basic parts: 1 Battery: This is the longest section of the pen, which provides power to the unit. 2 Heating Chamber: This section attaches to the battery and applies heat to the concentrate, which is placed inside it. 3 Mouthpiece: Vapor is inhaled through this section, which attaches to the heating coil. 4 Charger: Separate from the pen itself, this recharges the battery. 5 Dab Tool: A small metal implement used to load concentrate into the heating chamber.

How many times do you tap the button on a vape pen?

Note that many common vape pen batteries require you to tap the button 5 times in order to activate the unit. Loading the chamber: Opposite the side that screws onto the battery, the heating chamber will have a cavity for housing your concentrate.

Can you use a dab tool to load a vape?

Using a dab tool to load the unit is recommended due to the stickiness of many concentrates. Preparing to vape: Once the unit is loaded, you’ll need to screw the mouthpiece section onto the side of the heating chamber opposite the battery. The unit is now fully assembled and ready to use.

What vapes work best with a looser pack?

Any vape considered “conduction” (like the PAX) will usually work best with a tight pack and fine grind, and vapes labeled “convection” (like the MV1) will usually work best with a looser pack and coarser grind. Be careful though, some companies like to throw the word convection around but aren’t always 100% accurate.

How to use a 4-piece metal grinder?

If you’re using a typical 4-piece metal grinder then what you can do is pack your herb in the lid and hold the grinder upside-down when you grind. This will mimic the action of a 2-piece grinder and get it a little finer than usual.

Do all vapes need a grind?

Note: Not all vapes require a fine grind, but if you are having trouble getting good vapor this is the first thing I recommend you try. PACK FAIRLY TIGHT – Equally as important, you need to pack the herb chamber full and fairly tight with most vapes. If your material is loose in the oven it won’t be thoroughly and evenly heated, ...

Can you put ground up material in a vaporizer?

So if you take your ground up material right from your grinder and put it right in your vaporizer, it’ll work. But if you really want optimal results, take the grinds from your grinder and actually just lay them out on the piece of paper.

Do you need to buy special products to vaporize herbs?

Also, moisture in your material will cause the vapor to be harsher than it really should be. Now you don’t need to buy any special products or anything to do this.

Does it matter what vaporizer you have?

It doesn’t matter what vaporizer you have. These few tips I’m going to talk about now will get you more vapor that is less irritating. One of the important things to know about vaporizing is that the material you put in needs to be drier than you probably think, and it needs to be ground up finer than you probably think.

What is a concentrate pen?

Concentrate pen vaporizers (also known as "dab pens" or "wax pens") are the fastest and easiest way to enjoy botanical extracts and concentrates on the go. Small enough to fit in your pocket, concentrate pens allow you to discreetly medicate at a moment's notice while you're out and about. Concentrate pen vaporizers have come a long way ...

How does a 510 dab work?

These parts are threaded (universal 510 threading is typically utilized), which allows them to be connected and disconnected from each other by simply twisting them on or off. Unscrewing a dab pen's mouthpiece reveals the atomizer, which includes the chamber (or dish) in which concentrate is placed, as well as the heating coil.

What are the different types of atomizers?

Different Types Of Atomizers. Concentrate atomizers come in three varieties: wicked, wickless (which refers to the material that the heating coil is wrapped around), and flat (also referred to as "donut", "terra", or "halo" style). Even though each type of atomizer is designed differently, they all employ a coil as the heat source.

What is wickless atomizer?

Best when used with higher viscosity (thicker/solid) concentrates, wickless rod atomizers are typically used by users seeing more power at higher temperatures. Wickless rod atomizers come in the following varieties:

What is a vape coil?

A vape coil is a cylindrical device that contains the atomizer wire and wick in one piece. The atomizer coil itself is made of metal. The most common type of metal used is Kanthal. Although other metals such as stainless steel or nickel are used for temperature control vaping. The metal coil resembles a coiled spring.

What is the resistance of a vape coil?

The most common types of vape coils are: Sub ohm vape coils – atomizer resistance is less than 1.0 ohms.

What is the best vape tank?

The best quality vape tanks, found at Mig Vapor, are precision engineered and the coils thread easily into place. Once the coil is inserted, place a couple of drops of e-liquid through the top opening of the coil directly on to the cotton material.

How to prime a sub ohm coil?

To prime a sub ohm atomizer coil, the first thing to do is insert the new coil into the base of the vape tank. The best quality vape tanks, found at Mig Vapor, are precision engineered and the coils thread easily into place.

What happens if you don't prime your vape coil?

If a coil is not properly primed, the first vape could potentially fry the coil and for sure get an unpleasant burnt tasting vape. In addition, the coil will likely be ruined and require replacement. Ruining a new vape coil on the first vape equates to money down the drain.

Why is vape wick saturated?

First, the vape wick replacement is saturated to avoid a burnt taste or cause coil damage. Next, the coil life is extended. Overall, coil life will be affected by how much you vape and the wattage. The idea is to get the most coil life you can because that’s money!

What is the wick on an atomizer made of?

As you can see in the image above the atomizer coil is surrounded by wick. The wick is usually made of organic cotton although other fibers such as bamboo can also be used. The coil and wick are in direct contact. If the wick is dry and the coil is heated, the cotton will burn.