Press up and down buttons simultaneously to make adjustment manually. And press fire button shortly time will cause the device go into the next 1-second-adjustment. Then press the fire button for 1.5 seconds to save the setting and go back to the customization mode.
Full Answer
How to set up a vape?
How to set up a Vape. 1 Step 1 - Prepare your device. Remove your device from the box and place it on a flat surface in front of you. 2 Step 2 - Fill your tank or pod with e-liquid. 3 Step 3 - Prime your coil / pod. 4 Step 4 - Settings or no Settings? 5 Step 5 - Set the correct output power. More items
Where to buy the drag 2 vape?
Although the Drag 2 has gained popularity rather quickly and you can buy it nearly anywhere, we recommend you to shop at VaporAuthority.com, an online vapor shop that has gained the respect of the vaping community due to their incredible customer service and a large selection of the industry’s latest and greatest products.
How to turn on the drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process. How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode.
How to vape like a pro?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing. That's it you're done!! You are now Vaping like a PRO!
How do I change my Voopoo drag settings?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the “W” wattage icon flashing. The wattage can be adjusted from 5W to 80W.
How do I change the Voopoo drag on my vape?
2:355:33DRAG 3 mod and settings by voopoo - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf we get the up and down bar and press them. Together. We can change the theme. So we've gone downMoreIf we get the up and down bar and press them. Together. We can change the theme. So we've gone down to the next one press the fire button.
What are the different settings on a Voopoo drag?
The button combinations on the Drag S are as follows:Powering on & off: Tap the fire button 5 times.Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes. ... Locking & unlocking the device: Hold the up button and power button at the same time.More items...•
How do I adjust my vape settings?
1:503:08How to setup your Mod Kit? - YouTubeYouTubeStart of suggested clipEnd of suggested clipHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid weMoreHowever if you're using a suburb device a coil of 1.0 ohm and under you need a thicker liquid we recommend a 70 30 ratio as the device is more powerful if you use 50 50 liquid in a sub-ohm.
What wattage should I vape at Voopoo?
The 0.15ohm coil is supposed to be used from 60-80W and Voopoo says that it's best from 65-75W. At 65W I get warm vapor and a good amount of flavor but it feels like it can be better. Increasing the wattage to 70W makes the vapor a little warmer, more to my liking, and the flavor gets better too.
How do you change mode in drag s pro?
Here's how to operate the device:Device On/Off – 5 Clicks Fire Button.Lock/Unlock Device – Press & Hold Fire and Up Button.Puff Reset – Press & Hold Fire & Down Button.Change between Smart Mode & RBA – 3 Clicks Fire Button.
What is smart mode on VooPoo drag?
The SMART mode of DRAG X automatically recognizes. the inserted coil , and matches it with the best wattage. SMART mode also provides intelligent power memory. Even if you replug the atomizer, it still remembers the. last power you adjusted, your exclusive power value.
What wattage should I vape at Drag s?
In my experience, this coil performs best at 40W and the flavor is actually better than the 0.15Ω coil. It's the perfect level of warmth and flavor. Unlocking the Drag S Pro into RBA mode lets you take this coil up to whatever wattage you like and I tested it out at 50W. It's a hot vape here but it still performs well.
What temp should my VooPoo drag 2 be?
I found the vapor to be dense and very tasty at around 75-85W, which is also the range recommended by Voopoo. Temperature Control vaping is also great with the Drag 2, just as it was with the original.
What wattage gives the best flavor?
The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts. Clapton and Alien coils usually take a bit more power to ramp up so you'll want to boost the wattage if you're using either of these options.
What temp and wattage should I vape at?
Many people agree that 420 degrees Fahrenheit or 216 degrees Celsius is the sweet spot. You get as much flavor as possible without feeling the warmth of the vapor. If you want to add even more flavor, try a temperature between 425 and 450 degrees Fahrenheit or 218 and 232 degrees Celsius.
What does a and P mean on a vape?
You can scroll through these three modes, labelled A, P and A&P on the screen, by pressing the fire button three times consecutively. In A&P, you're free to simply draw on the mouthpiece or press the fire button; both will activate the built-in battery.
How to activate a Vape?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
How to turn on Drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process.
What is Drag 2 Mod?
What’s fascinating about the Drag 2 Mod by VOOPOO, aside from its good looks, is the advanced GENE.FIT chip that’s integrated into the device. It provides a full range of features, like temp control, TCR adjustments, the new FIT mode, and a variable wattage mode that will allow you to reach up to 177W. To control the device to the fullest ability, there is a large firing button, two adjustment buttons, and an intuitive OLED display screen. Combine all of this with its protection suite and a micro-USB port that supports charging and future firmware upgrades, and you’ve got yourself one of the impressive devices on the market.
Why does Drag 2 say "Check Atomizer"?
That could be the result of a few things, such as your tank or atomizer not being attached to the device, it not making a solid connection, or an issue with your coil not making a connection. Most times when you see this prompt, it will be that your tank isn’t attached or not tightened enough to make a solid enough connection.
How tall is the Voopoo Drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan. Enhancing its appearance, the Drag 2 Mod comes included with a visually striking resin inlay design that’s available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, and Ink finishes. Positioned on the backside of the device there is a magnetized battery door cover which is capable of housing dual 18650 batteries, giving you longer durations between charges.
Why does Drag 2 turn off?
There could be a couple of reasons why your Drag 2 Mod would turn off, and two of them primarily being that there is a sleep mode that activates after the device is inactive for 30 seconds or your batteries have depleted too low.
How to install batteries in a mod?
How To Correctly Install The Batteries: Begin by turning the mod to its backside. On the back, there is a removable battery access door. Once you remove the access door, you will see two battery bays, each marked to indicate how to properly insert the batteries. If you aren’t sure of how to install the battery properly and need to learn more about battery safety, we recommend you do that before attempting to install the batteries.
How to try a vape out for the first time?
To try your new vape out for the first time; place your mouth on the drip tip/mouthpiece, begin to draw from the mouthpiece and/or hold down the fire button at the same time as you are drawing.
When to charge vape?
For most users charging a vape coincides with charging their smartphone so a good habit to get into is to charge your vape every night when you go to bed next to your smartphone. It is always recommended to use the allocated USB charging cable that came with your device.
How many watts does a Zelos vape have?
For Example: When using the Aspire Zelos Kit it ships with a 1.8ohm BVC coil. This coil type has a recommended wattage of 9-15watts. To use the device correctly you will set your device to output somewhere between 9-15w. Around halfway is a good place to start so you would set your device to 12w by using the arrow keys. This will make sure you don’t overpower or underpower the coil inside the tank.
What are the different types of vapes?
There are 2 types of vapes; fixed powered devices and variable powered devices. This refers to the ability to adjust the power settings and fine-tune the vape experience. If you have a pod system its likely type 1, but read through both types below to make sure before proceeding.
What happens if you set your coil incorrectly?
If set incorrectly this can lead to the coil burning out and that bad taste we were talking about earlier. To know what settings you need for your device you can find this information in a few places; in the manual or on the packaging, on the coil itself or coil packaging, or online from the manufactures/retailer where you purchased your device from.
What coils are used in power mode?
Pretty much all coils need to use with this mode, you can use Kanthal, stainless steel (SS), and nichrome ( nickel -chrome) coils. most of readily made coils are made out of Kanthal Wire, which is why power mode tends to be oh-so-popular among users of different expertise levels.
What is power mode?
Power mode is very self explanatory. You can choose the level of wattage (amount of power per second) or voltage (the force of that power). This is used to set the optimal power for your device, as written on the coil you are using, to produce the right amount of cloud and flavor.
What is bypass mode?
Bypass mode gives you the experience of raw power of your battery to heat your coils. Here you can build your coils at lower resistances than is normally accepted by power or temperature control mode, meaning that the power of the hit will be determined by the sheer state of you battery and the resistance of the atomizer.
Can you set a temperature control?
You can set personalized power or temperature control settings for your convenience. On select devices, if you have a few different power or temperature settings that you normally use, you can set these as memory settings to you can easily scroll through them to change from one setting to another.
Do mods support coils?
Here it’s better to have basic understanding of coils, and it’s always advised to check your device carefully, because some mods support particular coils for TC mode, while others state clearly that they support more than one type, which you’ll find in the settings as TC-Ni, TC- Ti or TC ( NI, Ti ).
How to clean 510 spring loaded?
A great way to clean the spring loaded 510 on the mod is to put a few drops of alcohol on a Q-Tip or whatever, you don't need much, and just push straight down on the pin a few times to make sure there's no gunk keeping it from moving freely.
How to clean 510 threads?
Use a cotton bud to wet the 510, the cotton bud just needs to be wet. Then you can use a toothbrush to clean the threads and gap around the positive 510 pin. If needs be you can repeat, but you'll have to let the mod thoroughly dry out before you even think of using it. Mordacai, Oct 28, 2020. Mordacai, Oct 28, 2020.
How many volts should a 20W coil be firing?
Well if your coil is 0.63 ohms and your mod is set at 20W, it should be firing at about 3.5v not 4v.
Why isn't my center pin moving?
First guess (based on having a couple Drag's) the center pin in the mod may not be moving up/down freely because of debris (dried juice, etc.), and needs a through cleaning so it can compress and fully return freely.
Can you repeat a mod?
If needs be you can repeat, but you'll have to let the mod thoroughly dry out before you even think of using it.
