how not to break your vape tank

The idea is to tap the tank on a surface like a table or a countertop and then just screw the lid off. Many times, this helps to unstick the tank. Just be aware not to tap your device too hard because you could break the tank in the process and have e-liquid spill everywhere.

Full Answer

How to take apart a vape tank?

How to Take Apart a Vape Tank 1 To remove the atomizer coil, unscrew it by twisting counterclockwise. 2 To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. 3 To remove the mouthpiece, lift it straight up to pop it out of its socket. More ...

What happens if you don't clean your vape tank properly?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale. To avoid this, simply make sure your vape tank is cleaned and dried at regular intervals.

How to stop a pod vape tank from leaking?

While these tips mainly apply to tanks, some of them also apply to leaky pod vapes. Here’s how you can stop your vape tank from leaking. The o-rings on a tank serve to seal together all of the different parts. If your o-rings are ripped or damaged this allows e-juice to go where it’s not supposed to and will cause leaking.

Should you flick your vape tank?

You may have seen experienced vapers giving their vape tanks a quick flick when they break out their vaping kit. A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience.

Why does my vape tank keep cracking?

When a tank produces enough dry hits, it can crack because of extreme pressure within the tank's well. If you're trying out a new device, it's important to explore its wattage and voltage capabilities carefully. That's because some tanks simply cannot handle extreme output levels.

How do I keep my vape pen from breaking?

A common issue that happens with vape pens, sometimes as a result of being overly tightened, is that the metal rings that conduct electricity get pressed too deep and fail to make contact with each other. An easy solution is to use a paper clip to very gently pry the metal ring up. Be careful not to break the ring off!

Does dropping a vape break it?

Accidentally dropping your e cigarette or vape mod E-cigarettes, especially cylindrical shaped devices, can suffer from battery failure when dropped. A significant impact to an e-cig to its weakest point, the end, can cause pressure to build. A rupture to the battery can occur as a result of this pressure.

How long does it take to break in a vape?

The ten minute wait is key. The user manuals from some coil manufacturers suggest waiting five minutes. However, we recommend waiting 10 minutes to be on the safe side.

How do I protect my vape?

Keeping your vaping equipment in a properly designed carry case is the best way keep both you and your vape gear fully protected on the go. It's important to remember that you should never carry loose batteries or equipment in your pocket or in a bag.

Do vape pens break easily?

Some of these causes are easy fixes, such as oil setting and getting stuck in your cartridge. Others are more technical, like a battery, atomizer or coil issue. Most of the time, your vape pen isn't actually broken. More often than not, once you identify the issue with your vape pen, you'll be able to troubleshoot.

Will my vape explode if I put it in water?

5 – Store Your Vaporizer Safely & Away from The Sun As vaporizers are electronic devices, they are easily damaged by water. In fact, water damage can cause the sparks that lead to a fire. Make sure you store your device in a cool and dry place when not in use and clean it thoroughly between charging sessions.

How long does it take for your lungs to heal from vaping?

After one to nine months: clear and deeper breathing gradually returns; you have less coughing and shortness of breath; you regain the ability to cough productively instead of hacking, which cleans your lungs and reduce your risk of infection.

Can I put water in my vape?

The answer to this question is no, you will not be able to make cool clouds and shapes with the vapor that comes out of the vape pen. The reason for this is that the vapor that comes out when you put just water in the vape will cool much too fast to produce large clouds, or sometimes any visual vapor at all.

How many puffs a day vape?

Although vaping can feel better for your lungs, you don't 'end' a vape like you end a cigarette. This means you can become carried away. Typically, manufacturers advise that 10 puffs on your vape are about the same as 10 puffs on your cigarette.

How long should I wait between vape hits?

15 to 30 secondsDon't Chain Vape You must let your wicks saturate to reduce the possibility of a dry hit. The general rule is to wait 15 to 30 seconds before puffing again. For people who are trying to quit smoking, 30 seconds can be a long wait. In this case, you can buy e-juice with a higher nicotine level.

How many puffs of vape is equal to a cigarette?

When we transfer it into puffs on average, it means that you will have to take 500 hits of vape to smoke as much nicotine as you would with a single cigarette.

Common vaping problems

It is just one basic example of how we can all do better health-wise. If we add some nasty habits, like smoking, to all of this, coughing and not being able to get rid of that unique smell of cigarettes from our clothes becomes a part of our everyday life.

1. Avoid overfilling

E-liquids can be sticky, and they can create a mess once they leak from the tank, and one of the best ways to prevent it is to avoid filling it to the top.

2. Check power settings

Some of the e-cigarettes give us an option to change the power settings and decide how much of it our e-cig will use for its operating. Although there is usually some range, and it is up to us to choose if we want to set it to the maximum or minimum, the best solution is to set it to the optimum range.

3. Check the e-juice

You have probably heard of PG and VG, but many are still unaware of what they really represent. PG stands for Propylene glycol and VG for Vegetable glycerine, and the mix of these two liquids creates the vape juice. Now, depending on how much power your coil head requires, you want to get a lower or higher VG percentage.

4. Make sure that O-rings are still in a good shape

Experienced vapers probably know what O-rings are, but we will explain it further for those new to it. O-rings are tiny seals made of rubber that can be found on the bottom or top of our vape tank, and their role is to, yes, you guessed it right, seal it.

5. Avoid leaving e-cigarette on its side

The looks should be enough to settle this, but if you bought the e-cigarette, it is impossible not to notice a flat base on it, and it is not just because of aesthetic reasons. Yes, the aesthetics is one reason, but most of these devices are not made to lie on their side for long periods but upright, and their flat base allows them to do that.

To summarize

These tips mentioned above should come more than handy in preventing your vape tank from leaking, but, like with most things, it all starts from the device itself. Namely, there are vape tanks on the market where leaking is simply not possible, which is why doing some research before buying one should be on your to-do list.

What does it mean when your vape tank is cracked?

When a coil burns out, it can be switched out for a new one within minutes. However, a cracked tank means the end of an enjoyable vaping session.

Why does my tank crack?

When a tank produces enough dry hits, it can crack because of extreme pressure within the tank’s well. If you’re trying out a new device, it’s important to explore its wattage and voltage capabilities carefully. That’s because some tanks simply cannot handle extreme output levels.

Why does my vegetable glycerin tank crack?

Because of how thick this ingredient is, it doesn’t heat up and liquify as easily as propylene glycol. This can result in several dry hits. When a tank produces enough dry hits, it can crack because of extreme pressure within the tank’s well.

Can a cracked e-liquid tank leak?

Plus, a cracked tank can leak e-liquid anywhere, resulting in a waste of money as well as an annoying mess. If you want to make sure that your tank lasts for a very long time, there are a few precautions that you can take. When it comes to keeping your tank safe from harm, these four simple tips will do the trick.

Can glycerin crack a vape?

You may be surprised to learn that the amount of vegetable glycerin and propylene glycol in your e-liquid can determine whether or not your vape tank is at risk of cracking. Some vapers have reported that liquids with high amounts of vegetable glycerin have caused their tanks to crack.

Why does my vape tank spit back?

It isn't pleasant and it can happen often, particularly if you're a keen modder trying out different components to get the right 'balance' and find the perfect vaping experience. It happens when there's simply too much e-juice in the centre of your coil which can't be properly vaporised. Veterans know how to avoid this, but for those of you just starting out or looking for ways to curb sptitback, here are some things to bear in mind.

How to get vape juice to stop popping?

Another great tip is push the button and fire up your battery for a few short bursts before you start to vape. This will help the the excess liquid evaporate before you begin your vape session. If there's excess liquid in there, you'll hear a popping when you fire up the battery. Simply give this a few short bursts until the popping dies down or subsides altogether. It's a good idea to do this alongside the flicking strategy mentioned earlier.

What does a downward flick do to a vape?

A sharp downward flick can help clear the coil of any excess liquid, making for a much nicer vaping experience. This is particularly good advice if you've just filled the tank - just be warned that it could get messy so be sure to do it over a sink or some tissue!

Where does vapor go when you vape?

Any vapor that hasn't been inhaled will naturally condense and rest in your vape tank's centre post or mouthpiece. There's a risk it might then run down and back into the coil, potentially leading some nasty spitback when you go for your next inhale.

What does it mean to prime a vape coil?

Priming the coil means dropping some e-liquid directly onto it to saturate the wick and get the biggest bang for your buck in terms of flavour. Fans of big, flavoursome clouds will often prime their coils to get the best experience possible, but there is a risk of putting too much liquid in at once. Everyone that's primed a coil has had this experience and learned from it - don't be afraid to experiment and find the sweet spot for your vape kit!

How to stop ejuice from leaking?

A neat little trick to prevent leaking is to close your airflow when filling. With certain tanks, ejuice will try to escape when you close the top cap. If your airflow holes are open, this is the only possible exit and ejuice will start to leak.

Why does my ejuice leak out of my tank?

If you pull too hard when inhaling then this can cause your coil to pull in more ejuice than it can handle . This will flood the coil and cause the excess ejuice to leak out of the tank. Try inhaling more lightly when you go to take a puff.

What is a versed vaper?

The Versed Vaper team are a group of passionate and experienced vapers who take pride in writing helpful, quality content about vaping. From deals, to news and reviews, we've got you covered on all things vaping. Remember to subscribe to our newsletter, and follow us on Twitter, Instagram, and Facebook!

How to disassemble a vape tank?

In most cases, disassembling a vape tank is a simple task that you can perform in a matter of seconds. Simply grip the tank’s top hardware and bottom hardware in opposite hands and twist counterclockwise to loosen the threads. After you’ve unscrewed the tank, you’ll have two halves: the bottom hardware with the atomizer coil attached and ...

Why is my vape tank not moving?

One of the problems you might encounter when disassembling a vape tank is that the glass can sometimes be extremely stubborn. No matter how much you might wiggle the glass, it simply refuses to move. You don’t want to use tools or apply too much force in this case, because you’ll break the glass.

How to remove glass from a vape?

To remove the glass, wiggle it gently to slide it off of the silicone or rubber o-ring holding it in place. To remove the mouthpiece, lift it straight up to pop it out of its socket. Many modern vape tanks have coils that screw into both the top and bottom hardware.

Why is my vape tank stubborn?

In some cases, a vape tank can simply be stubborn because the machining of the threads isn’t so good. That could be a sign that you’ve gotten a counterfeit tank, but it’s more likely just a case of subpar workmanship. Some vape manufacturers are better than others.

How to remove stuck glass from a tank?

Just get a length of dental floss and place it in the seam between the glass and the tank’s hardware. Hold the floss tight while wrapping it around the tank repeatedly.

Can you break a VTR tank if you drop it right?

That "protection" ring on a VTR can also provide a false sense of security. If you drop it "right" you can and will break a glass tank depending on the point of impact. If you drop it even "more right" you can bend the ring or break it right off - that's been reported on here more than once.

Is the Joyetech tank changeable?

But it is very much a one trick pony - the only thing that will work with it is the tank atty Joyetech designed for it. The tank is not changeable - so that means it's not friendly for someone who likes to change flavors often. For 70 bucks MSRP it still may be a contender. The early reviews look good.

Can you bust off a 510?

Yeah, never busted off a 510, that would suck, maybe a wrist bungee cord is in order. that or find a hybrid combo. Would think the coolfire would land grenade first.

How long do you have to wait to vape?

All you got to do is wait around for your coils to warm up all by themselves. The disadvantage of this method is that one must wait for about 20 minutes before they can start vaping.

How to break in a new coil?

This is the fastest way to get break-in your new coils. So how does this method work? First, you must start by creating a vacuum. This will see to it that the wicking material takes up the e-liquid faster. Once you have properly set your new coils, block the air inflows. This will ensure that no air gets in. Next, start taking some dry hits. When doing so, do not power your battery. Perhaps, the reason why this method is also referred to as the No Power Method. Take a maximum of five dry hits, all while checking not to flood your coils or get the juice into your mouth.

How to get coils to work faster?

Also known as the vibrating method, this is also a no-power method of breaking-in new coils. With the shaking method, you just must fill your tank with your juice. After that, start shaking the vaping device as hard as you can. The reason for this is to create air bubbles. This method works under the assumption that the air bubbles created will help to push up the liquid faster. This is also among the very fast methods of getting your coils primed.