How do I hook my vape pen up to the Charger?
Hook your vape pen up to its charger using the included USB cable. First, plug the AC adapter into a nearby electrical outlet. Then, insert the large end of the USB cable into the adapter and connect the smaller end to the corresponding port in your pen.
How to use a vape pen with a button?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one. Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly.
How do I Turn on a vaporizer pen?
Even if you are not new to vaping, we hope you find some helpful information along the way. To turn on a vaporizer pen, press the button 5 times rapidly. A light will typically appear or flash to indicate it is on.
Should you stir your vape pen between sessions?
Both require proper heating chamber packing, however, a combustion vape pen might need to be stirred in between vape sessions given that it is igniting the dry herb from the bottom up via a hot coil – versus combustion vapes that heat like an over. For one thing, there will likely be extra things you can do that will depend on your vape pen.
How do I fix the connection on my vape pen?
0:091:25How to fix your cannabis vape pen and cartridge connection issueYouTubeStart of suggested clipEnd of suggested clipAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gentlyMoreAnd it's really easy to fix to bring it out so you'll want to grab a paper clip. And just gently catch underneath the edge of the connector. And tug.
How do I fix the connection plate on my DAB pen?
0:191:16How Do You Fix a Vape Pen Battery? - O2VAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paperMoreAnd screw that on too tight. So a very simple fix what we often tell people to use is just a paper clip. And if you stick the paper clip in between the connection plate and the threads.
How do you change the level on a vape pen?
The stylus design makes the O. pen discreet and the soft bottom acts as a power button that turns the vape pen battery on by clicking it 5 times. Once the vape pen is on, which will be indicated with dots lighting up around the bottom of the pen, click the button 2 times to change to the next voltage setting.
How do I fix my center pin vape?
1:112:43The Center Pin Issue - How to fix an eGo-T Battery DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can probably dig around and find whatever just make sure it's not going to break off and getMoreBut you can probably dig around and find whatever just make sure it's not going to break off and get stuck in there and you can gently push inside here and by pushing this disk.
What do you do when a cart doesn't hit?
The holes in the cartridge may be clogged with oil. Try warming your cartridge with a hair dryer (lowest heat setting) or by rubbing it between your hands to warm up the oil and change its viscosity. You can also poke a toothpick or safety pin gently in the hole to help de-clog it.
How do you hit carts with wires?
Touch the red wire to the outside of the cart Lightly touch the red wire to the exterior metal surface of the vape cartridge. At this point, you can plug your Android charger into a powered USB slot. You should hear an immediate hissing sound and notice vapor emerging from your cart.
What does blue light on vape pen mean?
Blue: Also known as, the dab mode, the blue light will come on when you are vaping at 3.8 volts. You should only vape at this voltage when you are vaping extracts with a 510-thread wax atomizer. To avoid damage, only use cartridges that can take the setting.
What does increasing the voltage on a vape pen do?
What Voltage Means on a Vape Pen. Simply put, the higher the voltage you set, the higher the heat. This will intensify or lessen certain variables of your vape. A lower voltage setting allows more subtle flavors to come through since some delicate terpenes may not be discernible with higher heat.
How do you use a push button vape pen?
Here are the steps:Press the button rapidly 5 times.Notice the light on the button flashing.The battery is now activated, you can push and hold the button as you're inhale your vape.Rapidly click the button 5 times to turn the battery off.
How do you hit a vape pen without coughing?
If you find that you are coughing when you draw on your e-cigarette, try taking a slower and lighter inhale until you get used to the vapour that is produced. Once you get used to it and your coughing stops, you can start to take slower and longer draws until you find the right vaping technique.
How to remove a vape pen?
The top part of the pen is the mouthpiece, or tank. Twist it counterclockwise to remove it. Next, you will see the heating chamber with the coil inside of it. Pull it off the same way, leaving the wire coil in place.
How to fix a broken vape pen?
Before throwing away your broken vape pen, try clearing out any debris inside of it to see if that fixes the problem. Start by unscrewing your vape pen's heating chamber and brushing out any loose material. Once you remove the surface debris, dab isopropyl alcohol onto the coil to remove wax and oil.
How to solder wires?
Heat the soldering iron and dab it against a wire solder. First, pick up a spool of solder wire from the home improvement store. Unspool it, laying the end of the wire near the wires you wish to solder. Turn the iron on and, after letting it heat for a minute, dab the tip against the end of the wire.
Why does my vape pen stop working?
Wire issues are a common reason good vape pens stop working. Before tossing your pen, try a few simple repairs. First, clear all debris out of the heating chamber. If the chamber looks clean, use a paperclip to adjust the coil’s positioning in the chamber.
How to clean a pen with isopropyl alcohol?
Pick up a bottle of isopropyl alcohol from a general store or drugstore. Moisten a cotton swab, but don’t soak it. You don’t want the isopropyl alcohol to drip into rest of the pen. Using the cotton swab, wipe down the coil and chamber if they appear blackened or covered in debris. Be gentle when handling the coil.
What to do if your pen won't work?
Turn on the pen and, if done correctly, it should work again. If it doesn’t, return the pen to the store to have a professional look at it or buy a new one. The wires may have come loose from their connections. This is hard to fix at home, especially if you can’t locate the terminals for the wires.
How to reassemble a pen?
Set each part aside and in order so you know how to reassemble the pen. The bottom section of the pen is the battery. The part above it connects to the heating element, or coil. Notice how the wires run from the battery to the heating element. Again, make sure the pen feels cool before touching it.
How long does it take to learn to use a vape pen?
It won’t take longer than 5-minutes to learn how to use a vape pen, with a button or without one.
How many times does a vape pen battery turn on?
Typically, most vape pen batteries with a button turn on by clicking it 5 times. Most variable voltage 510-thread batteries will switch voltage settings by clicking it either 2 or 3 times rapidly. It's important to always read the vape pen instructions before using a new one.
What to do when your vape is not in use?
Tips for When Your Vape is Not in Use. Try to make it a habit to turn it off your vape pen battery when not in use, this will help preserve battery life and protect it from use by children. Also, always remove the THC vape cartridge from the battery when not using it too, this will help prevent possible damage.
What is a dab atomizer?
Dab - The mode meant for vaping cannabis extracts with a 510-thread wax atomizer, and is indicated with blue lights. It can also be used with THC cartridges that can take this voltage setting. But do not use this setting with any vape cartridge unless you're certain it's capable of vaping at this voltage.
What is the dab mode on a vape?
The settings ranging from low to high are all automatic draw activated puffs, but the dab mode (blue lights) requires you to hold down the power button during the inhale. The first three settings are perfect for those who want to vape without having to press a button, and will vape THC cartridges by simply inhaling.
How long does it take for a vape puff to stop heating?
This means the pen will stop heating the cartridge after a certain amount of time. Most pens will have this occur around 8-seconds.
Can you vape with a 510 atomizer?
The O.pen has evolved into the 2.0 version with multiple temperature settings, including a dab mode. So, you can enjoy vaping your favorite cannabis extracts with your choice of 510-thread wax atomizer. There are many aspects to consider when purchasing a vape pen battery.
What is a vape pen?
Vape pens contain a battery, an atomizer, a cartridge or tank, a sensor and a mouthpiece. VM STICK 18 from Vaporesso .When the user sucks on the mouthpiece, the battery sends a charge to the sensor which causes the temperature in the atomizer to rise.
How to inhale a vaporizer?
How to inhale for the first time? 1 Disassemble Your Tank ＆ Fill Dropper With e-liquid 2 Fill tank but avoid the middle hole 3 Disperse e-liquid along the inside of the tank 4 Screw airflow base back onto tank with the battery end down 5 Please wait 5 minutes for the e-liquid to soak into the coil completely.
How to turn off battery on a vape?
Here are the steps: 1. Press the button rapidly 5 times. 2. Notice the light on the button flashing. 3. The battery is now activated, you can push and hold the button as you're inhale your vape. 4. Rapidly click the button 5 times to turn the battery off.
