how do you change the temp on ego-t vape pen

Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. The front LED lights will change color, indicating the temperature setting has been changed. The three temperature settings and their corresponding colors can be found below:

Full Answer

How do I change the temperature of my G Pen Pro vaporizer?

Screw and connect the eGo-T battery with the eGo-T tank atomizer. 2. : Uncover the eGo-T pre-filled cartridge: Step 1: Cut the plastic package; Step 2: Remove the rubber from the end of the cartridge. Step 3: Take off the eGo-T cartridge plastic cover. 3. Put the eGo-T tank cartridge into the eGo-T atomizern and start using the e-cigarette

How to turn on/off a vape pen?

Jul 22, 2021 · For dabs (wax), set your pen between 4.0V-4.3V. Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors.

What temperature should I Set my vape pen to?

The general rule of temperature still applies to them (high temperatures are harsh, large clouds, low temperatures are thinner clouds with more flavor), but they can go much higher in the temperature range. The low end of wax vaping is 325F, but the high-end can be as high as 900F. It all depends on how much flavor or how much vapor you want to ...

Do I need to adjust the temperature settings on my pen?

Jul 31, 2017 · Once the G Pen Pro Vaporizer has been powered on, you can cycle through its three temperature settings by simply holding the power button for three seconds. The front LED lights will change color, indicating the temperature setting has been changed. The three temperature settings and their corresponding colors can be found below:

How do I adjust the heat on my vape pen?

How do I change the settings on my ego-t?

How do I change the voltage on my ego-T pen?

How do I use my ego-T vape pen?

Why does my ego t taste burnt?

Why is my ego not producing smoke?

Why does my ego blink 3 times?

What does it mean when my ego T blinks 10 times?

What does 10 blinks mean on a vape pen?

How do I turn off my ego T vape pen?

What is ego vape pen?

How do I turn on my ego c twist?

For pre-filled oil cartridges, set your pen to 3.3V

Prefilled 510 thread cartridges require lower temperatures because the material is thinner and easier to heat. We recommend starting at the lowest voltage, 3.3V, and moving up to 3.8V if it’s not giving you enough of a hit. Some oils have a thicker consistency, so just turn the dial incrementally until you get the desired hit.

For dabs (wax), set your pen between 4.0V-4.3V

Wax is typically thick, so it will take more heat to get it going. Once you load the dab in your atomizer or attachment , set the voltage at 4.0V. Take a hit and expect a big cloud with crystal clear terpene flavors.

Use the included USB Smart Charger

Other USB chargers can easily overcharge your battery, weakening the cells inside over time. This is because other chargers continue to charge the battery, even when the charge is full. If you charge your pen overnight like most, you can easily degrade your battery in just a few months.

What to do if your vape pen is not temperature controlled?

If you have struggled with vaping certain products because of an unpleasant, harsh flavor, then consider lowering the temperature settings. If your pen does not allow for temperature control, consider getting a new vape pen!

Can you start high on a vape pen?

Starting high right off the bat can burn whatever you are vaping , and it can even overload cartridges and ruin products. Nothing can ruin a day more than getting ready to vape a pre-filled cartridge only to immediately burn out its circuits.

Can you vape dry herbs?

However, dry herbs are able to be vaped at a lower temperature than other substances, especially if you are looking to bring out more of the subtle flavor notes. Higher temperature vaping for dry herbs will release more of the chemical compounds found in whatever you happen to be vaping.

Is CBD a topical?

CBD is being added to a variety of topicals and products, including a ton of skincare products. These are considered CBD topicals, but not all topicals work in the same way. Read on to learn about which CBD products you should consider adding to your beauty routine.

erictho Super Member ECF Veteran

hi. i tried this as a last resort to re-wick a poorly performing atomizer. i activated it a few times before removing the needle plate, but the wick remained in the atomizer. i used a small needle to push the wick from the battery end out, but the wire threading at the bottom of the wick unwound. using a needle was probably too thin?

Slim82 Full Member

Thank you for this in depth article. I am only seeing one picture, are there suppose to be others?

VictorySpeedway Full Member ECF Veteran

My son and I cleaned a two atomizers this afternoon using this method, and they are as good as new.

Mishy73 Senior Member ECF Veteran

I have had my eGo-T for about 3 weeks and cleaned it for the first time this morning using this method ... I can't believe how easy it was, just watching the video and following the instructions (using the pics as a guide). My Atomizer is now working like a charm. Can't get over how much vapour I'm getting again.

intime Senior Member ECF Veteran

We did it & it worked like a charm! Tried cleaning my first one by soaking in alcohol & then read/listened further and found out this is not the best method. I came back with my second attie to this video with the helpful further instructions that Shaka Zuluf included and am so pleased with the results.

doctroprint Full Member

First, I'm a heavy vapor... I have tried to clean atty's in the past with not much success what so ever.

nerojrnde Senior Member Verified Member ECF Veteran

Thank you so much! What an informative way to clean these attys. I will be sure to do this from now on!