- To use the Firefly 2 vaporizer, lift off the top cover – it’s magnetized and should pull off easily. ...
- How much you pack in, and how finely ground it is, greatly affects how the Firefly hits. ...
- Sprinkle it into the heating chamber loosely, then gently tamp down with your finger, but do not push it in hard. Be careful not to over pack the chamber. ...
- After loading it, place the top back on the Firefly 2. You should feel the magnets pull it into place with a satisfying snap. Now, Ready to Go!
- YES! You are now ready to hit your Firefly 2 ! ...
- As you hit it, you will notice the flavor change after a few draws. ...
- While you are using your Firefly 2, make sure you are always charging the extra battery! ...
- After using the Firefly 2 vaporizer, make sure to clean it thoroughly according to the instructions in the box. ...
How to use a Firefly 2 vaporizer?
Most vaporizers perform best when you grind the materials super-fine. The Firefly 2 is the exact opposite. Instead, you want to use tear the weed with your hands, keep it clumpy, and then add it to the bowl.
What is the best way to heat the Firefly 2?
The Firefly 2 is a convection vape and, because of the design of the bowl, you need chunky material in order to get things heated up correctly. Rule of thumb: tear it up by hand, then pack it in with your thumb.
How to use the Firefly 2 grinder?
The Firefly 2 is the exact opposite. Instead, you want to use tear the weed with your hands, keep it clumpy, and then add it to the bowl. If you grind the weed too fine the Firefly 2 simply will not work properly; the particulates will clog up the airflow and you won’t get optimal results.
Why does the Firefly 2 require you to pack things tightly?
The FireFly 2 requires you to pack things in quite tightly, however, as this ensures the material is heated correctly. If it’s too loose, the materials will move around and this stops them from being vaporized correctly.
How do you hit a Firefly?
1:118:05Firefly 2+ Review, How To, & Maintenance - YouTubeYouTubeStart of suggested clipEnd of suggested clipStarting at 180. And then going from there then take both of your fingers. And press the sensors onMoreStarting at 180. And then going from there then take both of your fingers. And press the sensors on either side of the unit. The logo will light up and pulse.
How do you use Firefly 2 plus vape?
2:354:43Firefly 2 plus Review & How-To - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust press both sensor buttons wait for the light to turn solid green. And then take long slow drawsMoreJust press both sensor buttons wait for the light to turn solid green. And then take long slow draws. This device heats almost instantly to provide on-demand vapor.
How does the Firefly 2 vaporizer work?
The Firefly 2+ is a dry herb portable vaporizer made by the company Firefly Vapor. The Firefly 2+ vaporizer uses a dynamically controlled heating algorithm with a pure convection heat source to produce some of the best-tasting vapor that you can get from a dry herb vaporizer.
How do you operate a vape?
Instructions: How To Use A Disposable Vape PenRemove vape from the packaging.If there is a button, click it, and an indicator light should turn on. If there is no button skip to step 3.Inhale through the mouthpiece. ... Exhale the vapor.
What temperature should I set my Firefly 2?
0:000:27Firefly 2+ How to Change Temperature Settings without the AppYouTubeStart of suggested clipEnd of suggested clipAnd tap your left side to set the temperature. If you tap it six times it will go to the highestMoreAnd tap your left side to set the temperature. If you tap it six times it will go to the highest temperature. Settings. If you tap it once it will go to the lowest temperature settings.
What temperature is best for Firefly 2+?
For best results, I personally have found having the unit set to the highest temperature for dry herbs with the power tuning set at 105% gave me the best results of both flavor and vapor production.
How do you vape concentrates in Firefly 2?
0:000:41Firefly 2+ How to Pack Concentrates - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's best to stick to higher temperatures between 400 and 500 degrees Fahrenheit and when you'reMoreIt's best to stick to higher temperatures between 400 and 500 degrees Fahrenheit and when you're using concentrates. Take an extra-long first draw to allow your concentrate to soak into the pad.
How do I know when my Firefly 2+ is fully charged?
0:100:28Firefly 2+ How to Charge - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the Firefly 2 plus on the charging dock the LED light blinks blue when charging.MorePlace the Firefly 2 plus on the charging dock the LED light blinks blue when charging.
Can you use the Firefly 2 without the app?
The Firefly App is not necessary to operate the device itself. The temperature can also be controlled directly without the App on ALL Firefly 2+ devices, with 7 pre-set temperatures ranging from 320 to 500°F.
How do you use a push button vape pen?
Here are the steps:Press the button rapidly 5 times.Notice the light on the button flashing.The battery is now activated, you can push and hold the button as you're inhale your vape.Rapidly click the button 5 times to turn the battery off.
Why does my vape pen keep blinking?
When your battery is blinking white, that generally indicates that your battery is not fully connected. A loose battery can disrupt the flow of electricity, preventing your vape from fully charging. Thankfully, the fix is usually as simple as unscrewing your battery and reconnecting it.
Why will my vape not turn on?
It has run out of battery Even if you think it is fully charged, this might not be the case and, simply put, if your vape device is out of battery, it won't turn on. So, the first thing you should do is try charging your electronic cigarette again and see if this makes a difference.
How to Use Firefly 2 Vaporizer
Opening your own Firefly 2 Vaporizer is considered to be an aesthetic delight you could have. But, how are you going to get the most out of one of the best vaporizers? Here are some of the best tricks and tips on how you can make use of Firefly 2 Vaporizer. Well, it’s not as difficult as you think for as long as you are going to follow this guide.
Firefly 2 Dry Herb Vaporizer Steps
To make use of this Firefly 2 Vaporizer, you need to lift off its top cover – it is known to be magnetized and needs to be easily pulled off. Then, your chosen dried herbs will be placed on the circular type of heating chamber.
How to charge a Firefly 2+?
It’s best to fully charge your battery before the first use. Plug the micro-USB end of the charge cord into the charging dock, and the other end into a USB charge port. The good news is, the Firefly 2+ charges quickly. It charges in less than two hours plugged into a computer, but you can shorten that wait time to 45 minutes or less by using a wall charger with the USB charge cable. The Firefly’s light will flash blue when charging, and turn solid blue when it’s ready to use.
How to extract herbs from a firefly?
After two or three hits, open up the lid and stir the bowl with something like a toothpick. Push the herbs back into the bowl, put the lid back on, and take the next hit at your leisure. If you can’t find anything to stir with, wait for the herbs to cool down a little, then try dumping the herbs onto your palm, and back onto the Firefly. This is a convection vaporizer, so you’ll have to stir at some point to get an even roast, and full extraction. Stir at different times with different sessions, and find what works best for you
What is the best grind for Firefly 2?
Medium to coarse grind. The Firefly 2+ works best with a chunkier grind, on the medium to coarse side. If you grind too finely, the hot air can create tunnels through the herb, and blow herbs into the vapor path, ruining the vapor. The goal is to keep the herbs from moving around in the bowl.
How to draw a firefly?
Cradle the Firefly in one of your hands with the light facing up, so that you can touch both buttons with your thumb and middle finger. It should feel like you’re lighting a Sherlock pipe, or speaking into your phone’s microphone while on speaker. The Firefly 2+ is ready to hit in three seconds. Continually touch both buttons simultaneously, and wait for the third blink that stays solid green. Keep touching the sensors throughout your draw.
How long to draw vapor?
Continue your draw for at least ten seconds. Slow and steady is the best pace. The longer you draw, the thicker the vapor will get, as the temperature increases. It will time out after 30 seconds, which is probably longer than you’ll last. When you’re done, let go of the buttons, enjoy the taste, sit back, and relax!
Why do you start off low in Firefly 2?
You want to start off low because different temperatures deliver different elements from the herb. It also ensures you don’t max-out your materials right away. Running the Firefly 2 this way ensures you get the absolute maximum from each bowl and nothing is wasted.
Can you pack bowls in Firefly 2?
With the PAX 3 and the DaVinci IQ, you can get away with loosely packed bowls. The FireFly 2 requires you to pack things in quite tightly, however, as this ensures the material is heated correctly.
What is a firefly?
The Firefly is a true portable convection vaporizer. Convection heating produces the highest-quality vapor by pre-heating the air before it passes through the material, which is the optimal method for extracting the most flavors and active ingredients.
How to activate Firefly 2+?
There is no power button on Firefly 2+. To activate the heating sequence, place your fingers on the touch sensors located on either side of the device. To stop heating, remove fingers from touch sensors. While the heating sequence is activated by the sensors, no heat touches your flower or concentrates until you start to draw.
Why is the draw on Firefly so long?
Because each draw from Firefly has a broad temperature range, it delivers more of these ingredients and flavors than any other vaporizers. As you inhale, the temperature climbs from room temperature to over 400°F, releasing each ingredient as the temperature rises. This is why each draw on a Firefly is slightly longer.
How long is the warranty on Firefly?
provides a limited warranty on the Firefly TM device against defects in material and/or workmanship under normal use for a period of (2) years from the date of purchase. This limited warranty is transferrable.
How long does it take to return a Firefly?
We accept returns of most Firefly purchases within 7 days of the original delivery date, less a 15% re-stocking fee. The product must be unused and in its original factory-sealed condition to be eligible for return. We cannot accept any returns of any used products unless it's determined by our Customer Service Department that the item may be defective in some way. All returns must be accompanied by a Return Materials Authorization (RMA) number; otherwise, they will be refused and returned back to the shipper. If your Firefly unit is not working, please take the following steps for resolution. Please note: the warranty inspection and repairs process can take from 10-14 business days, depending on scheduling and the availability of parts required.#N#The Firefly can only be shipped within the U.S. and Canada. Warranty service and returns will only honored within these geographical locations.
What is the challenge of vaporizing plants?
The challenge in vaporizing complex plants is the dispersion of activation temperatures.
How does a firefly glow?
The Firefly's glow is produced by the heating element glowing through the borosilicate glass heating chamber. Much more than an LED or digital display, it creates a sense of connection to the vaporizing experience since you see the real power and heat that creates your vapor.
