Time Out The message “Time Out” means that the length of your puff has exceeded what your vape mod’s puff timer will allow. Most vaping devices have built-in puff timers that help to prevent overheating.
Full Answer
Does voopoo drag vape mod work with any vape tank?
Voopoo drag tank compatibility is universal. The vape mod works with any type of the vape tank and RDA. For users that are looking for a customized vaping experience, RDA’s are a great option. Also, VooPoo drag vape mod supports mesh coil tanks allowing a user to get the maximum of the flavor and clouds.
How does a vape mod work?
The resistance change is converted into a temperature increase and the mod adjusts its power to maintain the selected temperature. Think of it as a car traveling in cruise control. To maintain a speed, more power is needed to go up a hill than down a hill… but the speed would stay the same. First and foremost, a vape mod that supports TC.
What are advanced vaping modes and should you try them out?
But if you want to get the most out of your mod, it’s worth learning what these advanced vaping modes do and why you might want to try them out. Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of variable wattage.
What is bypass mode on a vape?
Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of variable wattage. You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you’re using.
What does time out on a vape mean?
Time Out. The message “Time Out” means that the length of your puff has exceeded what your vape mod's puff timer will allow.
How long does a drag vape last?
On average, a decently constructed coil for a sub-ohm tank should last you 4 days to 1 week. If you vape less because you cannot vape during work hours, or you do not vape throughout the day, then your coils are likely to last twice as long.
How do you reset a Voopoo drag vape?
0:000:31How To Do A Factory Reset on Your IQC Vaporizer - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.MoreOnce the reset is complete the vaporizer will vibrate and button lights will. Turn. Off you.
Why did my drag vape stop working?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly.
What is smart mode on VooPoo drag?
To switch modes quickly press the fire button 3 times. Smart Mode ( for PnP Coils ) = Identifies the best power for the coil and prevents the VW going too high for the coil; to help prevent burning out the coil. (Mode setting indicator is displayed at top left corner of screen).
How do I change my VooPoo drag settings?
Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes. The DRAG S also lets you change between drag and button tap firing. Locking & unlocking the device: Hold the up button and power button at the same time.
How do you reset a vape mod?
Reset the tank - You can 'reset' the tank by removing it from the mod, checking the screws are tight and pressing the fire button. Then re-attach your tank and select “n” when you are asked if it is a new coil.
How do you reset Voopoo drag 3?
The puff counter data can be reset by holding the power/fire button and the down/- buttons simultaneously. The Drag 3 runs on Voopoo's Gene Fan 2.0 chip and fires up to 177Watts. There are 2 main modes that can be changed by fast clicking the fire/power button 3 times.
How do you unlock Voopoo drag vape?
- Lock / Unlock = Press the Fire button and '+' (up) button simultaneously. - Mode Switching = Quickly press the fire button 3 times.
How do I fix my Voopoo drag vape?
If you're unable to vape with the Voopoo Drag Max, you should first try unlocking the device by pressing the fire and “+” buttons simultaneously....Voopoo Drag Max Not VapingIf the error message is “Check Battery,” you need to recharge the device.If the error message is “Temp High,” the Voopoo Drag Max has overheated.More items...
Why is my Voopoo flashing red?
Current battery status – logo flashes once when pod is inserted. Low battery – Logo flashes red 10 times.
Can you hit Voopoo drag while charging?
Battery Life and Performance The Drag S, on the other hand, is more compact, has a decent battery capacity, and comes with USB Type-C charging, which means you can charge it up from depleted to full in about an hour. Plus you can also uses while it is charging.
How to prime a vape coil?
But advanced users can also manually prime the coil by holding down the power button in refresh mode. That’s very much an option for the advanced vaper (or super taster) who can discern the difference between different lengths of time refreshing the coil.
What is pulse mode on Vaporesso?
Essentially, the mode switches the relatively consistent output of most devices by a regular pulsing of output, which occurs every 0.2 seconds as long as you hold down the fire button.
What is a custom power curve?
Custom power curves allow you to vary the wattage you’re vaping at during your puff. For example, you can have your device set at 40W, but with a custom power curve, it might start out at say 50W, then drop down to 45W after a second, to 40W after two, and then for any puff longer than four seconds, drop to 35W.
What is bypass mode?
Bypass mode is one of the simplest “advanced” vape modes because it actually removes the key feature of a variable wattage mod. You literally “bypass” the features of the mod and it instead performs more like a mechanical mod, essentially delivering power based on your remaining battery life and the resistance of the coil you’re using. This means that your effective wattage will be higher when the battery or batteries are fully charged and lower as you continue vaping throughout the day.
Why is FO mode hard to define?
FO mode is hard to define precisely, because vape giant Innokin is keeping the technology under wraps to an extent.
How does Coolfire Z80 work?
With the Coolfire Z80, you can enter the menu and get the device to prime the coil for you. The device then heats the e-liquid up at 50% of normal power to draw e-liquid into the coil, helping with both flavour and co il life. Neither are advanced, though both are a major step forward in technology.
How fast does a Voopoo Argus fire?
For the Voopoo Argus X this is classed as within 0.001 seconds, and it’s safe to say that, for all intents and purposes, this essentially means instant firing.
How to activate a Vape?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
Why does Drag 2 turn off?
There could be a couple of reasons why your Drag 2 Mod would turn off, and two of them primarily being that there is a sleep mode that activates after the device is inactive for 30 seconds or your batteries have depleted too low.
Why does Drag 2 say "Check Atomizer"?
That could be the result of a few things, such as your tank or atomizer not being attached to the device, it not making a solid connection, or an issue with your coil not making a connection. Most times when you see this prompt, it will be that your tank isn’t attached or not tightened enough to make a solid enough connection.
How tall is the Voopoo Drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan. Enhancing its appearance, the Drag 2 Mod comes included with a visually striking resin inlay design that’s available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, and Ink finishes. Positioned on the backside of the device there is a magnetized battery door cover which is capable of housing dual 18650 batteries, giving you longer durations between charges.
How to turn on Drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process.
How to switch between power mode and temperature control?
How To Switch Between Modes: Press the fire button 3 times to switch between Power Mode (Variable Wattage), FIT Mode, or Temperature Control Mode.
What is a voopo?
brand, VOOPOO quickly gained recognition and became a leading manufacturer for vapor products. Originally established to serve the medical and industrials fields, the brand has a significant amount of experience manufacturing high-quality products. In 2017, just after its acquisition, VOOPOO became an exclusive partner of the GENE chip and started incorporating its high-end GENE.FAN chipset into each one of its devices. To this day, VOOPOO remains to be one of the most innovative vapor product brands and has released several iconic products.
What is VooPoo Drag?
The VooPoo Drag is setting the power compensation mode standard to be deemed scientific, more secure, and more intelligent and approved by user reviews.
How much power does a voopoo drag have?
The VooPoo Drag has a 5 to 157W output and is powered by the latest custom-made Gene chip. It performs really well, with the fastest firing speed in the world of 0.025 seconds. The Gene chip that powers mod precisely controls its temperature and output with more power. Allowing vaper to get better taste and bigger clouds, Voopoo Drag has a wattage range of 130 to 157W with atomizers of 0.1 to 3 ohms.
How many watts does a mod have?
5 watts to 192 watts means normal mode, while mod’s super mode activates between 130 watts and 157 watts for high wat tage vapers. Each step is 1 watt. It is easy to access — just press the fire button thrice in rapid succession. Attaching an atomizer prompts the mod to ask if it is a new coil, it then sets the wattage to 45 watts if press yes.
What colors are in the Vape Mod?
The vape mod can be purchased in several different body finishes and colors — which are silver, black, and gold for the finishes and the colors being azure, jade, purple jade, rainbow, turquoise, full black carbon, black green carbon, black blue carbon, black gold carbon, black silver carbon, and black red carbon.
How to adjust wattage on a mod?
The mod’s variable wattage is smart and is able to make ideal output recommendations for the attached atomizer and can easily adjust. Pressing the fire button four ties leads to the wattage adjustment interface — which is indicated by a flashing letter W.
What is the color of the VooPoo Drag kit?
The VooPoo Drag kit comes in a box with a cover that bears similarity with leather and has the classic red and black color scheme. The kit comes with the box mod itself, a micro USB cable, an instruction manual, a gene chip card, and a warranty card.
What is the drag mod made of?
Drag’s material on the front side is made of carbon fiber and on the opposite side, it is engraved with the name DRAG. The 510 connector with two screws can be found on the top and is designed to fix it firmly to the mod. Mod’s bottom, on the other hand, has two lines of needle-styled venting holes.
