How To Turn On The Drag Mini Mod: Press the fire button 5 times consecutively. To turn the device off, repeat the process. How To Activate and Vape: From the first time you turn the device on, it will automatically default to the variable wattage mode that comes equipped.
What is the best vape mod for drag modding?
Voopoo Drag Mod A sleek and stylish vape mod, with extra GENE-ius. The VooPoo GENE chip is one of the most advanced on the market. It fires in 25 milliseconds (0.025 seconds) and enables cutting-edge features like Super mode.
How do I use the vape mod?
After keeping it stand for about five minutes, you are free to usethe device. Slide the button at the top of the mod, enabling you to enjoy a better vaping experience with the innovative variable airflow system. -Puffs in a day: Record the puffs in a day and it will be reset to zero the nextday.
Where to buy the drag 2 vape?
Although the Drag 2 has gained popularity rather quickly and you can buy it nearly anywhere, we recommend you to shop at VaporAuthority.com, an online vapor shop that has gained the respect of the vaping community due to their incredible customer service and a large selection of the industry’s latest and greatest products.
How to turn on the drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process. How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode.
How do you use a drag vape?
7:088:50VOOPOO Drag V2!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd temperature all you got to do is hit this fire button 3 times 1 2 3 and see how it's blinkingMoreAnd temperature all you got to do is hit this fire button 3 times 1 2 3 and see how it's blinking you can adjust it from there. And if you want to go back to regular water mode.
How do you use the drag Max vape?
0:563:32VOOPOO DRAG MAX Kit Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce your device is on you can adjust your wattage by pressing the buttons located at the bottom ofMoreOnce your device is on you can adjust your wattage by pressing the buttons located at the bottom of the screen raising or decreasing your wattage in small increments.
How do you change drag settings on vape?
If you've used something similar before, like the Vinci, it should be quite easy to make your way around the Drag S and X.On / Off – Five clicks of the power button.Change mode – Click the fire button x3 times. ... Adjust Wattage – use the up/down buttons.Puff Interface – Press up/down together.More items...
How does Voopoo drag work vape?
Voopoo Drag S – How to use/button functionalityPowering on & off: Tap the fire button 5 times.Changing modes: Tap the fire button three times to change from 'RBA' to 'smart' modes. ... Locking & unlocking the device: Hold the up button and power button at the same time.More items...•
Why is my drag vape not working?
The most common reason your VOOPOO DRAG X is not firing when you push the button is because it is locked. Your device can be locked and unlocked by simply clicking the fire button five times quickly. The VOOPOO DRAG X is shipped in a locked position to prevent accidentally turning on during shipment.
How do I change my drag max settings?
Drag Max Button CombinationsPower On or Off: Press the fire button 5 times.Switch Modes: Press the fire button 3 times.Change UI: Hold both adjustment buttons to bring up the UI menu. ... Lock/Unlock All Buttons (Including the Fire Button): Hold the fire button and top adjustment button together.More items...•
What wattage should I vape at Drag s?
In my experience, this coil performs best at 40W and the flavor is actually better than the 0.15Ω coil. It's the perfect level of warmth and flavor. Unlocking the Drag S Pro into RBA mode lets you take this coil up to whatever wattage you like and I tested it out at 50W. It's a hot vape here but it still performs well.
What wattage should I vape at?
On the contrary, even 10 watts is sufficient to guarantee a satisfying vape, which may be ideal for new vapers. As you become more experienced, it's safe to say that vaping starts to shine between the range of 40 and 50 watts.
Is the drag s draw activation?
The Drag S will fire at up to 60W and features both draw or button activated firing. The Drag X on the other hand will fire at up to 80W but only features button activated firing. Both devices will auto detect the coil that you insert and automatically set the power to the recommended wattage.
How do you change modes in Voopoo Drag 3?
To switch modes press the fire button three times. Out of the box the Drag 3 only comes with Smart mode and RBA mode enabled. If you want to use TC then you'll have to download the Voopoo software program and Drag 3 firmware update from their support page.
How do you adjust Voopoo drag 2?
To adjust wattage while in TC Mode, press fire button 4 times rapidly to activate wattage adjustment. You will see the “W” wattage icon flashing. The wattage can be adjusted from 5W to 80W.
How do you unlock Voopoo drag vape?
0:050:47Voopoo Vmate 200W - How to Lock / Unlock the Fire Button - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd maybe it happened while it was in your pocket or something like that and you don't know how toMoreAnd maybe it happened while it was in your pocket or something like that and you don't know how to unlock it it is done like this hold down the UP button and the fire button at the same time.
How to turn on Drag 2 mod?
How To Turn On The Drag 2 Mod: To turn on the Drag 2, simply press the fire button 5 times consecutively. To turn the device off, repeat the process.
How to activate a Vape?
How To Activate and Vape: When you first turn the device on, it will automatically default to its variable wattage mode. From there, you can adjust the wattage or rely on the automatically recommended wattage the device provides. Press and hold the fire button and your coil will vaporize the e-liquid.
Why does Drag 2 say "Check Atomizer"?
That could be the result of a few things, such as your tank or atomizer not being attached to the device, it not making a solid connection, or an issue with your coil not making a connection. Most times when you see this prompt, it will be that your tank isn’t attached or not tightened enough to make a solid enough connection.
How tall is the Voopoo Drag 2 mod?
One of its latest releases is the VOOPOO Drag 2 Mod, a fascinating device that features a remarkable chassis. It stands just 88.3mm tall, 51mm wide, and only 26.5mm in depth. It’s constructed of a superior zinc alloy material, giving it incredible durability and strengthens its external shell for an increased lifespan. Enhancing its appearance, the Drag 2 Mod comes included with a visually striking resin inlay design that’s available in Island, Flame, Aurora, Scarlet, Fire Cloud, Puzzle, Dawn, and Ink finishes. Positioned on the backside of the device there is a magnetized battery door cover which is capable of housing dual 18650 batteries, giving you longer durations between charges.
Why does Drag 2 turn off?
There could be a couple of reasons why your Drag 2 Mod would turn off, and two of them primarily being that there is a sleep mode that activates after the device is inactive for 30 seconds or your batteries have depleted too low.
What is a voopo?
brand, VOOPOO quickly gained recognition and became a leading manufacturer for vapor products. Originally established to serve the medical and industrials fields, the brand has a significant amount of experience manufacturing high-quality products. In 2017, just after its acquisition, VOOPOO became an exclusive partner of the GENE chip and started incorporating its high-end GENE.FAN chipset into each one of its devices. To this day, VOOPOO remains to be one of the most innovative vapor product brands and has released several iconic products.
Installation of battery
1. Slide and open the battery cover according to the indicator at the bottom.
Precautions for Daily Use of Leather
1. Please try to avoid scratches by sharp objects or direct friction against rough articles.
Fozzy71 Vaping Master ECF Veteran
I am not sure why you are getting the error (I would contact voopoo directly) but if you are already on 1.0.0.1 I personally would not recommend updating unless you want your mod to shut off after 15 minutes (I think) of not being used. I found that to be quite annoying (having to power up to vape if it sat too long) and promptly rolled back.
Fozzy71 Vaping Master ECF Veteran
Update: 1.Increase voltage regulation mode (similar to mechanical mode). 2. Key lock mode can be used to lock the fire button, can’t use up and down, But you can still enter the setup system.
sdmf74 Senior Member ECF Veteran
Guys I figured out how to use the mod with the newest version firmware 1.0.0.2 and not have it shut off every 10 minutes!!!
Fozzy71 Vaping Master ECF Veteran
Guys I figured out how to use the mod with the newest version firmware 1.0.0.2 and not have it shut off every 10 minutes!!!
sdmf74 Senior Member ECF Veteran
Crazy huh? It took me a while to figure out how I did it but I was stoked nonetheless
sdmf74 Senior Member ECF Veteran
Just noticed that Voopoo has removed firmware version 1.0.0.2 from their website, prolly had too many people complaining about the shut off feature.
52anddone Vaping Master ECF Veteran
And I see they have a contest for the New Voo Poo Too here on ECF. I wonder what that will be like ? I was just out stretching my legs and checking other threads and stumbled across this one, after I just entered that very contest myself.
