A half wrap refers to the coil legs pointing in the same direction. A full wrap refers to the coil legs pointing in opposite directions. Should I test the resistance of my coil before firing it?
Full Answer
How to wrap vape coils?
For more info, watch Rip Trippers tutorial on how to build a parallel coil by hand. For even better results you can use a coil jig: just wrap the first coil using the jig’s guide, and manually wrap the second coil in between the gaps. Wrapping vape coils can appear to be much more difficult than it really is.
Should you learn about vaping coils?
If you’re new to vaping or just looking to expand your knowledge, learning about coils is an absolute must. While a ton of factors influence the flavor and vapor production of your vaping experience, few things matter more than your selection of coils.
What determines the resistance of a vape coil?
The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
What are vape coils made of?
Each of these components are combined in any given coil to provide it with its unique profile and affect its tank compatibility, ramp-up, flavor production, vapor production, and style of vaping (i.e. DTL or MTL). Materials used in the construction of vape coils include Kanthal, Nichrome, Stainless steel, Nickel, and Titanium.
How do you wrap vape coils?
7:4810:47The Vape Coil Building Tutorial For Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the coils start glowing orange. Apply pressure to the outside of the build with the tweezers.MoreOnce the coils start glowing orange. Apply pressure to the outside of the build with the tweezers.
What does more wraps on a coil do?
HOW DOES THE NUMBER OF WRAPS AFFECT MY COIL? The more wraps, the higher the resistance, which goes on to affect flavour and cloud production. 8 wraps is a good starting point, but you can wrap your wire around more times if you want a different resistance.
How many wraps should my coil be?
How many coil wraps do I need? This depends completely on what type of coil you're building, your target resistance and even how much flavor you want from your coil. We'd usually suggest sticking to around 6 wraps as this will give you a good cross sectional surface area with decent flavor.
Should vape coils be spaced?
Space. When the spaced and contact coil is the same resistance, spaced coil has larger space and horizontal space then contact coil. So the compatibility for a vape tank may not as good as the compressed coil. It is even difficult to install a standard spaced coil into a on drippers with small space.
What wattage should I vape at 0.15 ohm?
For the 0.15 ohm GT4 coils, used on Vaporesso's NRG tank, for example, the recommended wattage is 45 and 65W. 45 to 65W is still a fairly broad range, so it will be up to you to find what works best within these limits.
What wattage should I vape at 0.4 ohm?
For example, a 0.4-ohm mod may recommend a 23 - 28 watt setting, and a 0.8-ohm mod may recommend you use up to 35 watts. Some recommendations can go much higher (e.g., 200 watts). Sub-ohm devices work best when using a high VG vape liquid (e.g., a VG/PG ratio of 70/30).
How can I make my vape coil last longer?
5 Tips to Make Your Coils Last LongerPRIIME YOUR COILS. When you first install a new coil, it's important to completely soak the wick with e-liquid. ... USE HIGH-QUALITY E-LIQUIDS. ... REGULARLY CLEAN YOUR COILS. ... USE E-LIQUIDS WITH A HIGHER PG CONTENT. ... KEEP YOUR TANK FILLED.
What wattage should I vape at 0.20 ohm?
0.3 ohms - 40 watts to 90 watts. 0.2 ohm coils - 40 watts to 100 watts.
How many watts do I need for a .23 ohm coil?
Wattage range 20-45W.
What is the best coils for flavor?
The best ones to go for flavour wise are clapton, titanium (if you prefer vaping with TC mode) or an Alien coil. The sweet spot for getting a balance of vapour and flavour is around 0.3ohms. Depending on your coil choice you'll want to up the wattage from anywhere between 50 and 100 watts.
What is a micro coil vape?
A micro coil is basically an ordinary coil that's has been wound in such a way that the coil material of each individual wrap is touching the wrap some on either side of it leaving as little gap between them as possible.
How do vape coils work?
Coils, which are sometimes referred to as atomisers, are the component of your vaping device that creates vapour.
What are the different types of coil?
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette.
DuoPrime – a new era for coil design
At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption.
What is coil in vape?
The coil is a component inside the atomizer. But as we know, the world of vape lingo is vast and when you say coils, we know what you mean. If your vape mod is the body, atomizer heads are the heart, a fundamental part of your vaping experience.
What are atomizer coils made of?
Most atomizer coils are made from Nichrome or Kanthal. But there are different wire types that some vapers use. Nickel, Titanium and Stainless Steel are also available, but less popular. These tend to be used for temperature control vaping and aren’t suited to all e-cigs. But that is for another time.
How does an atomizer head work?
An atomizer head converts energy from the e-cig battery and heats the coil inside, this then vaporises e-liquid that is soaked into the wicking material, which is then inhaled by you.
What is the resistance of an atomizer?
Well atomizer heads have an electrical resistance value measured in ohms (Ω). Depending on the amount of electrical resistance will depend on what ‘ohm’ your atomizer head is. Atomizer heads generally fall into two categories. High and low resistance.
What happens when you press a button?
When you press your button, it provides power to the coil. This then converts that energy to heat (If you could see your coils, they sometimes glow red when you are pressing your button), and vapourises e-liquid from the saturated wicking material.
Do vapers use e-liquid?
Some vapers prefer an atomizer head that lasts a long time, doesn’t use much e-liquid through the day and they don’t look for larger clouds of vapour. Other vapers are satisfied exhaling large clouds of vapour and are happy topping up with juice more frequently. The best thing to do is experiment.
What is a vape coil?
Vape coils are the replaceable element in vape kits and tanks. It is the coil that takes the power from your vape battery and turns it into heat, which is then used to turn e-liquid into vapour. Inside a standard coil model, you will find a length of coiled wire wrapped around an absorbent wick. The wire creates heat, while the wick absorbs ...
How to tell if a coil needs changing?
The quickest way to tell if your coil needs changing is by taste, if you notice a taste like burnt metal or fibre then we recommend replacing it straight away. If the cotton in the coil has taken on a dark brown or black colour it means that it has begun to deteriorate.
What is rebuildable coil?
Rebuildable coils have been created for the purpose of being used with rebuildable atomisers. They require a far greater knowledge to use safely, including knowledge of Ohm’s Law, battery safety and general vape knowledge. Rebuildable coils are the pinnacle of customisability, as they allow you to pick an exact resistance and use metals ...
What is mouth to lung vaping?
Mouth to lung vaping describes the process of inhaling vapour into your mouth and then carrying it into your lungs, the same way you would smoke a cigarette. This style is especially popular amongst new vapers as it feels very familiar.
How is coil resistance measured?
A coil’s resistance is measured in Ohms. Ohm’s Law describes the relationship between current, power and resistance, and is very useful to understand as it directly relates to vapour production, which can help you decide which coil is right for you. A common analogy for understanding Ohm’s Law is to imagine the plumbing in your home.
What to do if your coil is loose?
On your coil you may see small rubber rings, called O-rings, they act as a seal to ensure your tank doesn’t leak when it’s filled with e-liquid. Before installing your coil check that the O-rings are intact.
What are the ingredients in e-liquid?
The two main ingredients of e-liquid are VG (Vegetable Glycerin) and Propylene Glycol (PG), which are both widely found in food and medicine. The levels of VG and PG will always add up to 100%, for example, 70% VG / 30% PG or 50% VG / 50% PG.
How to change coil on vape?
However, these general rules will enable you to change your vape coil like a pro: Remove the e-liquid tank from the battery. Turn the tank upside down and unscrew the cap found on the bottom. Carefully unscrew the coil head from the cap and replace with your new coil.
How to get vape coils to taste fresh?
Cleaning your vape coil is easy and will quickly restore your vape coil to a state that enables your vape to taste fresh, clean and more enjoyable. Follow the simple steps found below to regain flavour: Remove your vape coil, including wicking material from the coil head and place into a small bowl of warm water.
What is Kanthal coil?
A hardy material with excellent resistance to high temperatures. Kanthal: Made from a combination of aluminium, iron and chromium, kanthal vape coils are particularly suited to high wattage vape mods. With a super quick heat up time, expect some serious vapour production.
What material is used to make vape coils?
Let's take a quick look at some of the materials used to make vape coils and how they might affect your vape: Ceramic: A porous material - ceramic coils are known to enhance the flavour of your vape compared to other materials used to produce vape coils.
How long should I wait to fill my vape coil?
Priming your vape coil is easy and straightforward. Simply fill your tank with e-liquid and allow the tank to stand for anywhere between 5 and 30 minutes - the longer the better! Your other option is to manually soak the wicking material through the openings in the atomiser head. A few drops should be enough.
What is a vape pod?
For instance; if you're talking about an e-cig, vape pen, or vape pod, all are vaporisers intended for use with e-liquids or cartridges. Similar to other vaping components, vape coils are just one of the names given. Also known as atomiser heads, or clearomisers; vape coils describe the element and mechanism that converts energy from your battery.
Why is a low resistance coil used for sub ohm vaping?
A low resistance coil used for Sub-Ohm vaping will use more power, potentially impacting the battery life of your device. Because you're using more energy, you'll consequently heat your e-liquid to a hotter temperature. This creates some fairly sizeable vapour clouds.
How to build a coil for a RDA?
First, examine the deck and see if it is a dual or a single-coil atomizer. Then check the size of the deck and see how large your build can be—you don’t want your coils to touch the top cap as this will cause a sort.
How are micro and macro coils created?
Micro and macro coils are created by taking a single piece of wire and wrapping it around a screwdriver, drill bit, or coil jig. The difference between a micro and a macro coil is the inner diameter of the coil. It’s that simple.
What is macro coil?
Macro: a macro coil build is a coil that has an inner diameter that’s 2.5 mm and above. The bigger the inner diameter of the vape coil, the higher its resistance, and vice versa. Likewise, the thicker the gauge of wire used, the lower the resistance will be.
Why do you need to have two coils?
When doing a dual coil build, it’s essential for both coils to be identical in size and form, to ensure that they heat up properly. Dual-coil builds obviously create more vapor than a single coil of the same specs, but require double the power to perform.
What do you use to pinch coils?
Wire: any of the vaping wires would do. Flush cutters: wire cutters that can cut close in small spaces. Ceramic tweezers: to pinch your coils while pulsing. Fine tip tweezers: to fluff your cotton and place it inside the wick ports. Small metal rod: a small screwdriver, or coiling tool.
How to save money on vaping?
One of the best ways to save money in vaping is to build your own coils. Rather than buying disposable coil heads every week, you can make your own. It’s a fun hobby that vapers not only take pride in, but get to enjoy the fruits of their labor. The way to get good at it is through practice. Although, it’s perfectly reasonable for first-time ...
What is a parallel coil?
In essence, a parallel coil is made out of two or more wires wrapped next to each other. Resistance is divided by the number of wire strands, so make sure you are aware of your device’s limits when building parallel coils. For beginners, a dual parallel 26-gauge Kanthal coil would be a nice starting point.
cjpeltz Super Member Verified Member ECF Veteran
Fairly new at rebuilding my own coils. Just got a Infinite Magma this week and have had some success with building single coils for it (I haven't tried building a sub-ohm coil just yet).
Slips Full Member
I think part of the equation that matters to me when deciding how or what to build is not addressed in your post. Airflow, where its coming from and how much. With your magma, do you like a tight draw or open? Wicking material can also play a part in the decision process, i.e.
erosmaximus Full Member
Fairly new at rebuilding my own coils. Just got a Infinite Magma this week and have had some success with building single coils for it (I haven't tried building a sub-ohm coil just yet).
BEX5 Full Member
I have found that longer coils will produce better flavour as there is more wick touching the coils and therefore been vaped! Usually i build duel coils at 0.6 ohms with 26 awg Nichrome with a 2mm diameter is aprox 8 wraps with japanese cotton great flavour, over loads of vape IMO.
msmith4512 Senior Member ECF Veteran
Fantastic post from rusirius that goes in depth into coil and power issues.
Why use micro coils?
Micro coils are fine if you're building to a high resistance with thinner wire and less airflow - small, low-power, low-surface-area coils. It helps the smaller amount of wire retain heat for bit longer and vaporize more juice in a shorter amount of time.
What happens if the resistance is the same but the diameter is reduced?
If the resistance is the same, but the diameter is reduced, then you haven't gained any surface area. What you're left with is the same amount of metal and the same amount of wick making contact. The only difference is that you will have less wick retaining juice across a longer coil.
Can you make juice wraps too wide?
Make them too wide, and the juice may not be able to cover the distance in time to keep the center wraps from overheating. Sometimes, it is more prudent to increase diameter instead of wraps when increasing surface area. Nanos are a bit special. They're meant to capitalize on the outer surface of the coil.
Does thicker wire make vapes hotter?
Less air cooling the coils will make them heat up faster, though because thicker wire retains heat for longer, your vape will get progressively hotter with extended use. EDIT: I thought of something else about diameter. I've noticed that I tend to build to wraps rather than the diameter. 4-7 wraps is my range.
What is a coil in a vape?
Coils are the engine of any vape tank or mod. Without them, no device could produce vapor. But not all coils are alike. They come in different sizes; they also feature different build materials, different designs, and can achieve different things.
What does it mean when a vape hits you dry?
A "dry" hit is a precursor or a sign that the wick is not saturated enough and will eventually burn the cotton if heat is applied. A burnt hit is when the cotton does burn and creates smoke that a user inhales.
What is stock coil?
Stock coils refer to pre-made coil heads that come with sub-ohm tanks or regular MTL tanks. They are the easiest coils to use as they are replaceable and do not need to be cleaned or otherwise maintained.
Why do people vape?
People get into vaping because they want an alternative to smoking. When they unexpectedly get a dry or burnt hit, it can completely turn them off of vaping. But, luckily, burnt hits are a one-time occurrence.
What is rebuildable coil?
Rebuildable coils are DIY coils made by vapers themselves. The variety offered by rebuildables is one of their main draws, as they can use several different types of wire material, as well as a wicking material. The most standard wire types include:
How Do Vape Coils Work?
What Are The Different Types of Coil?
- MTL/”mouth-to-lung” coil
MTL or “mouth-to-lung” coils are designed to replicate the experience of smoking a traditional cigarette. This means a tight draw and low power output. Generally, MTL coils are designed to be used with higher nicotine strength e-liquids, to further simulate the “throat hit” of a cigarette. Yo… - DL/”direct-to-lung” coil
DL or “direct-to-lung” coils are designed to accommodate high power, large airflow and massive vapour production. These days, most DL coils use strips of mesh instead of traditional round wire. You can identify a coil head that’s intended for DL vaping by looking at the diameter of the coil in…
Round Wire vs Mesh – What’s The difference?
- Traditional round wire coils and coils made using mesh strips are both extremely common, but what’s the difference and which one is right for you? Typically, round wire is used for lower-wattage coil heads. This is because they perform very well at low temperatures. Also, the manufacturer can easily tweak performance by changing the wire thickness or number of wraps…
Duoprime – A New Era For Coil Design
- At Innokin, we’re always looking for ways to improve the vaping experience. As mentioned previously, mesh coils are excellent at increasing e-liquid absorption. What if there was a way to increase wicking efficiency even more using mesh strips? With this in mind, our engineers designed DuoPrime technology. DuoPrime works by implanting an outer layer of mesh between …