" " Aegis Geek Vape How To Reset Puffs

Vape-FAQ.com

aegis geek vape how to reset puffs

by Lionel Turner Published 2 years ago Updated 2 years ago
image

Holding the fire button and the down button simultaneously for 3 second allows you to reset your puff counter if you wished. Holding the up and down button simultaneously for 3 seconds allows you to lock your wattage setting into place. Inside the mod is a built-in 1500mah battery.

Change Mode: 3 clicks of the fire button then using up down buttons to scroll. Once in Output adjustment mode, you can scroll down to adjust coil resistance and reset puff count by pressing the fire button.

Full Answer

How to reset aegisboost puffcount?

How to reset aegisboost puffcount. Just press the firing Botton and down button for the wattage in 5 secs. Then the puffcount will glow, then it will reset your puffcounts.

Is the geekvape aegis user manual too complicated?

If the Geekvape Aegis user manual seems too complicated, then you might like to opt for this Nano starter kit instead. It has bright colors and is more affordable compared to the L200 and Legend models.

How do I reset the coil and puffs value?

Resistance and Puffs reset: Enter the setting state. Press the Fire button to toggle the cursor to the COIL or PUFF. Press + to reset the COIL or PUFF value. 8. Screen lock: Press the + & – button simultaneously to lock and unlock the screen. 9.

How many batteries does the geekvape aegis legend have?

It’s powered by two 18650 batteries and has a glass tube to contain vape juice. According to the details in the Geekvape Aegis user manual PDF, a range of specific parameters apply to the Geekvape Aegis Legend.

image

Why does my vape spit back?

Other possible reasons for spit back may include the following: using high PG e-juice in conjunction with a sub ohm coil, chain vaping from a tank which gets fairly hot as the heat thins your ejuice, a coil which is wicking the cotton too quickly.

Why is my e juice not turning into vapor?

The e-juice in that instance is too thick for your low wattage device and coil, therefore the e-juice doesn't heat sufficiently to turn into vapor. The more common reason is that you've flooded the coil when priming, excess juice in the coil which can't vaporize quickly enough results in gurgling and/or spit back.

How to fix a sub ohm tank leak?

Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill the tank and wait around 10mins.

How long does it take for a mod to sit?

You need to take out the batteries (if it is replaceable) and let it sit for 30 minutes. If your device becomes too hot that you can't touch it, or if the mod keeps on showing overheat protection even if it is not hot, please click here to contact us.

Is Aegis Legend shockproof?

Aegis Legend: Waterproof Statement. As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, please click here.

image

Geek Vape Aegis Product Overview

  • The specific product we’ll be covering from the Geekvape Aegis range is the Geekvape Aegis Legend. It’s a box mod with a stylish and modern design that will definitely serve you well.It features a colored display screen that will provide information like the current wattage, and it als…
See more on breazy.com

Product Parameters

  • According to the details in the Geekvape Aegis user manual PDF, a range of specific parameters apply to the Geekvape Aegis Legend. One of the most important is the maximum output duration. It can output for 10 seconds at a time, so keep that in mind while you’re vaping. Other key features include the charging voltage and amperage. It needs 5 volts and 1 amp, so make sure to charge …
See more on breazy.com

Buy Geekvape Aegis Products

  • Now that we’ve summarized the Geekvape Aegis Legend user manual, we’ll take a look at some of the other Geekvape Aegis products that we think are worth your attention. We’ll give you a brief overview of each one and then a link where you can find out more. That way, you’ll be able to make an informed choice about which one is right for you.
See more on breazy.com

Conclusion

  • Now that you’ve seen our summary of the Geekvape Aegis Legend user manual, you should be aware of all the essential information about that product.You should also be familiar with the features, benefits, and drawbacks of the three other Geekvape products we’ve included in this article. Hopefully, this information will help you to make a choice about Geekvape and which of t…
See more on breazy.com

General Queries

  1. Here is our official online store, which is operated by one of our distributors, https://store.geekvape.com/ If you have any queries or concerns about your order in our official online store, pleas...
  2. If you have any interest to wholesale our products, please contact our sales department at [email protected]
  1. Here is our official online store, which is operated by one of our distributors, https://store.geekvape.com/ If you have any queries or concerns about your order in our official online store, pleas...
  2. If you have any interest to wholesale our products, please contact our sales department at [email protected]
  3. Please share your social media account to us, and our service team will forward to our promotional team, if we willing to start collabration with you, our PM will contact you.

Mod Issue

  1. Which batteries should I use, and where should I buy them? Battery information guide If you're using 18650s in a regulated device, your best bet is the Samsung 30Q, Sony VTC6, or the LG HG2. If tho...
  2. Why my mod becomes hot or even shows overheat protection? Normally if you vape for a long time, the device or the tank will become too hot. It will show overheat protection and an…
  1. Which batteries should I use, and where should I buy them? Battery information guide If you're using 18650s in a regulated device, your best bet is the Samsung 30Q, Sony VTC6, or the LG HG2. If tho...
  2. Why my mod becomes hot or even shows overheat protection? Normally if you vape for a long time, the device or the tank will become too hot. It will show overheat protection and and you can not vape...
  3. If your device have lines in screen, or the whole screen is black or white but still works, please turn off the mod and do a factory reset. This procedure applies to other Geekvape device as well....
  4. Check if there is any oxide in the battery connection part, clear it and try to turn on the device …

Atomizers

  1. If your coil is only slightly burnt, you may get a slight burnt taste, as if something’s not quite right. Given that we know that burnt coils can produce harmful chemicals, you should probably stil...
  2. 1. Press top cap and move it or press the open button 2. Add e-juice through the fill port 3. Close the top cap and stand it for 5-10 mins to get the cotton completely saturated 4. Set a p…
  1. If your coil is only slightly burnt, you may get a slight burnt taste, as if something’s not quite right. Given that we know that burnt coils can produce harmful chemicals, you should probably stil...
  2. 1. Press top cap and move it or press the open button 2. Add e-juice through the fill port 3. Close the top cap and stand it for 5-10 mins to get the cotton completely saturated 4. Set a proper wat...
  3. Here are some tips to avoid leaking: 1.Please close the airflow holes when you refill the tank, and do not saturate the coil directly with juice dropping to the inner coil, you just need to fill th...
  4. Why is my tank gurgling when I try to vape and/or why is the e-juice spit backing in my mouth…

Pod System

  1. Why is my device heating up? 1.Normally if you vape for a long time, the device or the tank will become hot, or the red lights flashes 10s, You need to turn off the device and make it still for 30...
  2. If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil an…
  1. Why is my device heating up? 1.Normally if you vape for a long time, the device or the tank will become hot, or the red lights flashes 10s, You need to turn off the device and make it still for 30...
  2. If you press the fire button but the device does not fire, 1.If the red light flashes 3 times, it means that there is no atomizer connected, please change another pod or replace the coil and try ag...

About Aegis Lines

  1. Press the fire button three times in quick succession within 2s to enter the setting mode, then press and hold the “+” or “-” button for 2s at the same time to enter the menu. Press the left or rig...
  2. Aegis Mini is powered with 2A fast charging, which can charge up to 80% in just 30 minutes when you use 5V/2A charging head, but it needs around 2 hours to be fully charged. Why? It d…
  1. Press the fire button three times in quick succession within 2s to enter the setting mode, then press and hold the “+” or “-” button for 2s at the same time to enter the menu. Press the left or rig...
  2. Aegis Mini is powered with 2A fast charging, which can charge up to 80% in just 30 minutes when you use 5V/2A charging head, but it needs around 2 hours to be fully charged. Why? It depends on lith...
  3. As we all know Aegis lines are waterproof, shockproof, and dustproof. This article will talk about the waterproof feature of the Aegis lines. To know more about the product's shockproof feature, pl...

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9